Originally Posted by SoaDMTGguy
Well, I got it all put to gether, but as of right now, I still dont have an OS (windows is having problems with the RAID drives). I can, however, fill you in on how the build went.
Most things went fine, although figuring out how to rout the cables in the case was a bit tricky. I ended up takeing out the lower section fan so I could run cables through the fan hole. The silicon rubber drive mounts are much softer then the ruber ones on other Antec cases like the Super LANboy, so you can not tighten the screws all the way. It took some doing to figure out just how tight was tight enough to keep the drives in place with out crushing the mounts.
I must say, I liked the fact the Antec kept the front pannel cables (HDD LED, power switch, etc) conected as a strip insted of single as most other caes do. It made for much less clutter. There was one bit of panic when I first turned the system on and got no video, but it turns out I had forgotten to plug the P4 +12v line into my PSU :doh
I will get some pics up at some point, but right now I'm still trying to fix my RAID problem.