Quote:
|
the black/white pic...look closely.. FB goes to a pad on the opposite side of the PCB looks to me...
..you see..the trace terminates just before the resistor..and the pin above FB is obviously directly connected to the resistor.. Im thinking mod point is on the opposite side of the PCB..and require 50k VR. |
I just assumed it was a 50 ohm VR by its resistance measurement from FB and continuity check. Also I noticed they used a 50 ohmVR on the 5870. Not sure how you figured that out but I would like to know how you decided to use a 50k VR, so I can understand how these Voltera IC's work?






..you see..the trace terminates just before the resistor..and the pin above FB is obviously directly connected to the resistor.. Im thinking mod point is on the opposite side of the PCB..and require 50k VR.


I cant give up the goods
...Your getting your stripes..voltera info is right up there with the '5-point-palm exploding heart technique' and the 'death touch' ....you must first snatch the pebble
