That's fine, I'm always game for improvement.
You might get better ideas by discussing it though, as your knowledge on these systems can still be considered rather limited.
I agree on the limited knowledge of refrigeration systems.
When it comes to my areas of expertise my knowledge is vast. What I will do will benefit phase change builders. There will be a high level of accuracy with my product.
I was pleased to receive the diamond plates today. This will give me the opportunity to bolt the towers together and mount the prommies. The metal is 1/8 " thick. I have some fine tuning to do because I wanted to save some cash. It would have been a lot more expensive had they made all the cutouts and holes I need to put in there. The cost of what you see here in plates is about $250 US.
I have many more to do. You can see why I have to trim here, the front fits perfectly. The back panel will be bolted to the prommie supports at the back.
There will be enough room for the oil separators, reservoirs etc., that I ordered today, to be placed on the bottom half of the towers. There's room at the top as well. The controllers and electronics will be mounted under the top pieces.