Update #8 - 13/04/10 - Sleeving and cable management

Here is my setup for the day.

Needed to do some modifications to the tray.

I drilled out the holes that go through to the standoffs on the case and put some motherboard standoffs in.

Sleeved the fans and replaced the stickers with black ones that i cut out on the CNC laminate cutter.

Here are said stickers.
YouTube- CNC Laminate CutterAnd here is the cutter!
YouTube- CNC Laminate Cutter
Can't really see it, but i also cemented the LED tape holders on.

Time to tame the beast!

And sleeved!

Sleeved and attatched the LED tape.

Put the new red cathode in the base. Little did i know this is one is also broken! Must be a bad batch.

Started doing cable management under the motherboard tray with zip ties and bases.

Installed the fan controller and connected it up.

Installed the motherboard tray. The mass of cables are the front panel connections and power/reset buttons. They can be pushed under the mobo tray.
So it is now finished! Final photos coming up shortly.
Edited by oliverw92 - 6/10/10 at 3:05pm













































































