Originally Posted by Ge-Force
Dude.....he is runnin an AMD,there is no HTT or divider......
....but,if you run the ram at 2.7volts,run at 200fsb and 10.5 multi, set the ram "ratio" to 1:1,or even spd....and it should boot up,but make sure the reset jumper on that MSI is in the "user defined" position or it will boot up holding the defaults and triing to load the adjustments causing system instability..(trust me...MSI NF2 board and athlon equals speed.)...BTW...good ram timings are loose where they need to be and tight where they need to be,mine are 2.5,3,3,12 at 410mhz.
Are you baked out of your mind?
Here I am adjusting my HTT(To 260) and my ram divider (ratio of 2/1.66) to achieve a 2.6ghz overclock from a 2.0ghz and this guy is telling me these things don't exists cause I'm running AMD.
And your RAM timing are sauce btw.
I can get 420mhz out of 4x512 of mixed match cheap stuff at 2.5-3-3-5.
Again, a locked multi is NO BIG DEAL.
You can just drop your RAM divider, drop you multi and bump up your HTT to higher levels then normal to make up difference.