Haha, you guys are funny
My timings right now are 2.5-3-3-5-T/1. I have tried T/2 and it is stable at both with my current settings. However, switching to T/2 hasn't helped in my quest to get a higher OC. I can run 2-2-2-5-T/1 up to a point (i forget what that point is, I will have to double check), but it fails to boot once I get up in the 230x11 range.
As far as RAM voltages, I am at 2.8v which is the max in the range recommended for the RAM. My board will allow me to up that to 3.0v. I have tried this also, and seems to make no difference making higher OC attempts stable.
The other two voltage settings are my HT (1.2 and 1.25) and Chipset (1.5 and 1.6). I have tried max settings on all when trying to break that 230x11 barrier, but to no avail. Actually where I am at right now with 230x11, I can keep those both on the minimum setting and achieve stability. I may also be able to lower the RAM below 2.8v and still be stable, but I am not quite sure.
Right now I am at HTx3. I will try X2 and X1 to see if that helps at all.
Thanks guys for sticking with me!