Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Cable Sleeving Gallery & Discussion
New Posts  All Forums:Forum Nav:

Cable Sleeving Gallery & Discussion - Page 1016

post #10151 of 14333
I recently organized all my modding stuff. I use to just keep it in a cardboard box + a huge plastic storage bin. Maybe I'll post some pics in my Forever Alone worklog later on. tongue.gif
Big Lian Li
(13 items)
 
Forever Alone
(8 items)
 
 
CPUMotherboardGraphicsRAM
i5-6400 @ 4.7GHz Asus Z170-A Gigabyte GTX 1080 Windforce 4x16GB G.Skill DDR4 @ 2800MHz 
Hard DriveHard DriveMonitorMonitor
256GB Samsung 950 Pro 1.3TB FusionIO ioScale Asus VG248QE QNIX QX2710  
KeyboardPowerCaseMouse
Topre Realforce 87U Silverstone ST1000-G Lian Li PC-A77F Mionix Naos 3200 
Other
Mellanox ConnectX2 10GbE 
CPUMotherboardRAMHard Drive
Opteron 6128 Supermicro H8SGL-F Kingston Registered ECC Sandisk SSD 
Hard DriveHard DrivePowerCase
OCZ Revodrive 3 FusionIO ioXtreme Silverstone Strider 550W FT02BW 
  hide details  
Reply
Big Lian Li
(13 items)
 
Forever Alone
(8 items)
 
 
CPUMotherboardGraphicsRAM
i5-6400 @ 4.7GHz Asus Z170-A Gigabyte GTX 1080 Windforce 4x16GB G.Skill DDR4 @ 2800MHz 
Hard DriveHard DriveMonitorMonitor
256GB Samsung 950 Pro 1.3TB FusionIO ioScale Asus VG248QE QNIX QX2710  
KeyboardPowerCaseMouse
Topre Realforce 87U Silverstone ST1000-G Lian Li PC-A77F Mionix Naos 3200 
Other
Mellanox ConnectX2 10GbE 
CPUMotherboardRAMHard Drive
Opteron 6128 Supermicro H8SGL-F Kingston Registered ECC Sandisk SSD 
Hard DriveHard DrivePowerCase
OCZ Revodrive 3 FusionIO ioXtreme Silverstone Strider 550W FT02BW 
  hide details  
Reply
post #10152 of 14333
Looking forward to it =P. A bunch of my "Toolboxes" are new additions. I was storing stuff in FrozenCPU/PerformancePCs boxes and Plastic Bins for a long while too =P

Still got a cpl big FCPU boxes with random stuff in em.

I keep buying storage shelves and Storage Containers and Toolboxes and Tackleboxes, still my apartment has about 5 feet in total where you can see the carpet. I finally got around to cleaning off my Modmat Extreme Table last night, so i can use that as its meant again. It got buried for a long time tongue.gif

You already know the reason i wanted my AntiStatic Mat cleaned off biggrin.gif
Edited by kpoeticg - 11/22/13 at 5:18pm
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #10153 of 14333
I just got a bitfenix alchemy led strip and I was trying to make a custom cable so I could connect it to a splitter pcb. I cut the original wires (2) and crimped onto them fan pins and put them into a 3 pin fan connector. Something didnt work. Anyone know what I did wrong or how to do it correctly?


Edited by iamkraine - 11/22/13 at 7:56pm
post #10154 of 14333
I've never owned an Alchemy Strip, but the specs say it's 12v DC. And if it's 2 wires, that means one is +12v and one is Ground. On a 3Pin fan Connector, Pin 1 is Ground and Pin 2 is +12v. It should be pretty straight forward to change the pins. If you messed up and switched the 12v and Ground with each other, there's a good chance you fried your LED Strip and maybe whatever else was connected to the splitter....

If you did rewire it correctly, just make sure you have a +12v signal going to your splitter and not just 5v

The fan connector should have the pins numbered on either the top or bottom of the connector. Some of them will have 1| 2| 3| others will just have the first pin numbered 1
Edited by kpoeticg - 11/22/13 at 8:03pm
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #10155 of 14333
How do I know if its 12 or 5v that's going to the pcb splitter? I'm a noob still...
post #10156 of 14333
How are you powering the PCB? If the splitters being powered with a 4-Pin Molex, Yellow is 12v & Red is 5v
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #10157 of 14333
Quote:
Originally Posted by iamkraine View Post

How do I know if its 12 or 5v that's going to the pcb splitter? I'm a noob still...

for safer information I need a PCB top side picture
Edited by em ht - 11/23/13 at 2:32am
post #10158 of 14333
Here it is:

I used 4 wires because I just copied the pin out from the psu.
post #10159 of 14333
Where did you get the black pcb!?
post #10160 of 14333
Quote:
Originally Posted by Evil Genius Jr View Post

Where did you get the black pcb!?

Its called the Phobya 4Pin Molex to 6x 3Pin Fan Splitter PCB

$5 from performance-pcs.com
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=32022
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cables and Sleeving
Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Cable Sleeving Gallery & Discussion