Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Cable Sleeving Gallery & Discussion
New Posts  All Forums:Forum Nav:

Cable Sleeving Gallery & Discussion - Page 1025

post #10241 of 14333
Sometimes ATX Pins get stuck. Just make sure to pull the wire up straight and try to push the pin forward toward the tools prongs to make they're seated outside the pin on the tabs. Then just pull. Sometimes you gotta go as far as wrapping the wire around your finger and yanking as hard as you can. Make sure you have the prongs placed right before u do that. And if the wire rips out of the pin, it was just stuck and there was probly nothing you could do about it. It happens....
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #10242 of 14333
Quote:
Originally Posted by kpoeticg View Post

Sometimes ATX Pins get stuck. Just make sure to pull the wire up straight and try to push the pin forward toward the tools prongs to make they're seated outside the pin on the tabs. Then just pull. Sometimes you gotta go as far as wrapping the wire around your finger and yanking as hard as you can. Make sure you have the prongs placed right before u do that. And if the wire rips out of the pin, it was just stuck and there was probly nothing you could do about it. It happens....

Fair enough. Thanks
Ballistic
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7-6700k Asus Sabertooth Z170 Mark 1 Asus Strix Geforce GTX 980 Asus Strix Geforce GTX 980 
RAMHard DriveHard DriveCooling
Corsair Vengeance LPX Intel 600p Corsair Neutron XT  H100i V2 
OSKeyboardPowerCase
Windows 10 Steelseries Apex Corsair AX760 Corsair Carbide Air 540 
MouseAudio
Steelseries Rival 300 Razer Kraken Pro 
  hide details  
Reply
Ballistic
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7-6700k Asus Sabertooth Z170 Mark 1 Asus Strix Geforce GTX 980 Asus Strix Geforce GTX 980 
RAMHard DriveHard DriveCooling
Corsair Vengeance LPX Intel 600p Corsair Neutron XT  H100i V2 
OSKeyboardPowerCase
Windows 10 Steelseries Apex Corsair AX760 Corsair Carbide Air 540 
MouseAudio
Steelseries Rival 300 Razer Kraken Pro 
  hide details  
Reply
post #10243 of 14333
Quote:
Originally Posted by MillerLite1314 View Post

So having some problems with my 24 pin. Anyone else have trouble removing their pins? I'm nervous about snapping one off inside. I'm usimg lutro0's pin removal tool
About half my pins do that in EVGA 1300 G2, I just remove the atx tool, push the pin into the connector (the opposite way from pulling it out), then put the tool back in, making sure the prongs are outside the pin itself (and inside the nest), and push the tool and the pin towards each other. Then I push the prongs on the sides, and then pull on the wire. I’m almost done with the motherboard cable, and not a pin damaged, although some were really hard to put back in, but I’ll tell all about it later, when I finish it (maybe tomorrow).
Workstation mk II
(16 items)
 
ASUS A73S
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K Gigabyte G1.Sniper 5 GTX 1080 8GB GB GTX 1080 8GB GB 
RAMHard DriveHard DriveCooling
G.Skill Ares 16GB 2133 dual channel kit Crucial 893 GB SSD 3x HGST 3TB SATA3 H110i v2 
OSMonitorKeyboardPower
Windows 10 Acer XB271HK FILCO Majestouch 2 EVGA Supernova 1300 80 gold 
CaseMouseMouse PadAudio
Corsair 900D Cougar 700M Mionix Sargas 400 Asus Xonar u7 
CPUMotherboardGraphicsRAM
Core i7 2670qm ASUSTeK K73SD GeForce 610M 8 GB Samsung 
Hard DriveOptical DriveCoolingOS
750 GB Hitachi HTS54somenumbers Matshita DVD-RAM UJ8B0AW Laptop cooling — snakey heatpipe, some heatsink... Windows 8 pro 
MonitorMonitorKeyboardPower
Some 17" 1600×900 glossy panel, not too shabby. LG Flatron W2343T Most keys are perfect square. A few elongated r... The AC/DC adapter makes a high-pitched sighing ... 
CaseMouseMouse PadAudio
Not slim. Nexus silent mouse Custom handmade Built in, some realtek crap. 
CPUMotherboardGraphicsRAM
Pentium® III-S 1.13 GHz Compaq ProLiant ML330 G2 ATI Rage XL/XC 2 GB Kingston 
Hard DriveHard DriveOptical DriveCooling
A couple 500GB SCSI II disks in raid 1. 120GB SCSI II disk HL-DT-ST DVD-RAM Stock. It’s noisy. 
OSPowerCaseAudio
Windows XP Pro SP 3 Some PSU I pulled out from under my bed. Compaq. Very genuine case. Some Legacy audio. 
OtherOther
Realtek RTL8169/8110 Gigabit ethernet NIC AMI MegaIDE raid controller 
  hide details  
Reply
Workstation mk II
(16 items)
 
ASUS A73S
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K Gigabyte G1.Sniper 5 GTX 1080 8GB GB GTX 1080 8GB GB 
RAMHard DriveHard DriveCooling
G.Skill Ares 16GB 2133 dual channel kit Crucial 893 GB SSD 3x HGST 3TB SATA3 H110i v2 
OSMonitorKeyboardPower
Windows 10 Acer XB271HK FILCO Majestouch 2 EVGA Supernova 1300 80 gold 
CaseMouseMouse PadAudio
Corsair 900D Cougar 700M Mionix Sargas 400 Asus Xonar u7 
CPUMotherboardGraphicsRAM
Core i7 2670qm ASUSTeK K73SD GeForce 610M 8 GB Samsung 
Hard DriveOptical DriveCoolingOS
750 GB Hitachi HTS54somenumbers Matshita DVD-RAM UJ8B0AW Laptop cooling — snakey heatpipe, some heatsink... Windows 8 pro 
MonitorMonitorKeyboardPower
Some 17" 1600×900 glossy panel, not too shabby. LG Flatron W2343T Most keys are perfect square. A few elongated r... The AC/DC adapter makes a high-pitched sighing ... 
CaseMouseMouse PadAudio
Not slim. Nexus silent mouse Custom handmade Built in, some realtek crap. 
CPUMotherboardGraphicsRAM
Pentium® III-S 1.13 GHz Compaq ProLiant ML330 G2 ATI Rage XL/XC 2 GB Kingston 
Hard DriveHard DriveOptical DriveCooling
A couple 500GB SCSI II disks in raid 1. 120GB SCSI II disk HL-DT-ST DVD-RAM Stock. It’s noisy. 
OSPowerCaseAudio
Windows XP Pro SP 3 Some PSU I pulled out from under my bed. Compaq. Very genuine case. Some Legacy audio. 
OtherOther
Realtek RTL8169/8110 Gigabit ethernet NIC AMI MegaIDE raid controller 
  hide details  
Reply
post #10244 of 14333
Push the pin out from the front of the connector. Don't pull in the wire. Use a 1.5 hex screwdriver or something similar sized.
Big Lian Li
(13 items)
 
Forever Alone
(8 items)
 
 
CPUMotherboardGraphicsRAM
i5-6400 @ 4.7GHz Asus Z170-A Gigabyte GTX 1080 Windforce 4x16GB G.Skill DDR4 @ 2800MHz 
Hard DriveHard DriveMonitorMonitor
256GB Samsung 950 Pro 1.3TB FusionIO ioScale Asus VG248QE QNIX QX2710  
KeyboardPowerCaseMouse
Topre Realforce 87U Silverstone ST1000-G Lian Li PC-A77F Mionix Naos 3200 
Other
Mellanox ConnectX2 10GbE 
CPUMotherboardRAMHard Drive
Opteron 6128 Supermicro H8SGL-F Kingston Registered ECC Sandisk SSD 
Hard DriveHard DrivePowerCase
OCZ Revodrive 3 FusionIO ioXtreme Silverstone Strider 550W FT02BW 
  hide details  
Reply
Big Lian Li
(13 items)
 
Forever Alone
(8 items)
 
 
CPUMotherboardGraphicsRAM
i5-6400 @ 4.7GHz Asus Z170-A Gigabyte GTX 1080 Windforce 4x16GB G.Skill DDR4 @ 2800MHz 
Hard DriveHard DriveMonitorMonitor
256GB Samsung 950 Pro 1.3TB FusionIO ioScale Asus VG248QE QNIX QX2710  
KeyboardPowerCaseMouse
Topre Realforce 87U Silverstone ST1000-G Lian Li PC-A77F Mionix Naos 3200 
Other
Mellanox ConnectX2 10GbE 
CPUMotherboardRAMHard Drive
Opteron 6128 Supermicro H8SGL-F Kingston Registered ECC Sandisk SSD 
Hard DriveHard DrivePowerCase
OCZ Revodrive 3 FusionIO ioXtreme Silverstone Strider 550W FT02BW 
  hide details  
Reply
post #10245 of 14333
Im trying to remove the molex pins using the tool, i hear a click, the wire becomes loose, but it won't come out. I've been wrapping the wire around my finger and yanking on it with significant force but it's stuck in the connector. I've got a ocz zt psu if that matters
post #10246 of 14333
If you hear the click and the wire becomes loose, the pins most definitely stuck.
You could definitely try what lowfat suggested and push the pin out with something small like a hex screwdriver while the wires loose. Depending how stuck it is, it might pop right out.
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #10247 of 14333
Quote:
Originally Posted by KYKYLLIKA View Post

About half my pins do that in EVGA 1300 G2, I just remove the atx tool, push the pin into the connector (the opposite way from pulling it out), then put the tool back in, making sure the prongs are outside the pin itself (and inside the nest), and push the tool and the pin towards each other. Then I push the prongs on the sides, and then pull on the wire. I’m almost done with the motherboard cable, and not a pin damaged, although some were really hard to put back in, but I’ll tell all about it later, when I finish it (maybe tomorrow).

Worked out good. I wound up having to fiddle with a few of them a few times but all came out and I finished the 24 pin tonight. Fans will be next once I get some new ones in along with the rest of my cables.
Ballistic
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7-6700k Asus Sabertooth Z170 Mark 1 Asus Strix Geforce GTX 980 Asus Strix Geforce GTX 980 
RAMHard DriveHard DriveCooling
Corsair Vengeance LPX Intel 600p Corsair Neutron XT  H100i V2 
OSKeyboardPowerCase
Windows 10 Steelseries Apex Corsair AX760 Corsair Carbide Air 540 
MouseAudio
Steelseries Rival 300 Razer Kraken Pro 
  hide details  
Reply
Ballistic
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7-6700k Asus Sabertooth Z170 Mark 1 Asus Strix Geforce GTX 980 Asus Strix Geforce GTX 980 
RAMHard DriveHard DriveCooling
Corsair Vengeance LPX Intel 600p Corsair Neutron XT  H100i V2 
OSKeyboardPowerCase
Windows 10 Steelseries Apex Corsair AX760 Corsair Carbide Air 540 
MouseAudio
Steelseries Rival 300 Razer Kraken Pro 
  hide details  
Reply
post #10248 of 14333
woops I actually meant the 4 pin cables are getting stuck. The one that takes the round tool to remove. I was able to force one out but the tab got bent backwards and now looks like a fish hook
post #10249 of 14333
Hrmmm never had a fat 4Pin get stuck before. You can usually straighten the tabs back with an exacto knife or when it's really bent like yours an exacto knife + needle nose pliers
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #10250 of 14333
Some recent work, an XFX Pro power supply, same as the AX Corsair units, so horrible pinouts and double wires'a'plenty!















New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cables and Sleeving
Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Cable Sleeving Gallery & Discussion