Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Cable Sleeving Gallery & Discussion
New Posts  All Forums:Forum Nav:

Cable Sleeving Gallery & Discussion - Page 897

post #8961 of 14342
Quote:
Originally Posted by Big Elf View Post

You could either void the warranty and open up the pumps and superglue the sleeve inside the pump housing (you'll need to file open the gap in the casing a bit) or superglue the paracord at the pump end and use heatshrink to tidy it up. Then just use the heatshrinkless 'tack' method at the molex pins but you'll need to use heatshrink on the fan connector. An extra piece of SATA shrink on the fan connector covering the bottom part of it and the normal heatshrink can look neat. Also change the housings for black ones.

Thanks for the info!

I was planning on picking up some black fan connectors next time I'm at Micro Center, as well as some 3:1 heatshrink.

I had considered the "one piece of HS over the connector", but with just two cables I am worried it won't look as good as the two small pieces that I actually managed to get around the cable? I guess the point is moot as I intend to do it heatshrink-less, but yeah...

Also, Super Glue is a great idea; I had so many problems with the HS not holding on this one (at the pump base; don't wish to take apart pumps until I get my MCP35X2 housing in) that I eventually just got the heatshrink warm again after pulling everything super-tight right up against the pump and then using a zip-tie and trimming off the excess. It doesn't look bad, and it's crazy strong, not to mention in an area no one will ever see, but it's still not PERFECT so it bothers me lol.

Thanks again! +REP

(Any other advice from any more of you cable sleeving mavericks is welcome wink.gif )
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #8962 of 14342
Yeah I would prefer to do all heatshrinkless as well. But on fan connectors good luck. I found that the over the connector was by far the best looking. And it also held the paracord better than small pieces like that because they have nothing to grab a hold of. Although that might be the difference between cheap 2:1 HS(I originally got like 15+ feet from FTWPC) and quality 4:1 HS from MDPC. But to each their own.

Also since you stated that you might be going to MC, I also picked up some HS while I was there and before I made my order through MDPC. They have 3:1 HS with adhesive. I didnt realize it at first until I used it, but that stuff is really handy to have in case you have problems. My favorite use for that HS is when sleeving fans, I run paracord all the way to the hub where the wires are soldered in. I will cut a 3/16 inch piece and shrink it under where the sticker will be and when I put the sticker back down you cant see it. Heatstrinkless at its finest lol
Bubble Bee Tuna
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4770k@4.5 Asrock Z87 OC Formula 7970@1200/1600 6970@950/1450 
GraphicsRAMHard DriveHard Drive
6970@950/1450 Samsung Wonder Ram 120Gb Phoenix SSD 120Gb Phoenix SSD 
Hard DriveHard DriveOptical DriveCooling
1Tb Western Digital HDD 1Tb Western Digital HDD Slim Slot stealthed Heatkiller 3.0 CU, Heatkiller 7970 CU with back... 
CoolingCoolingOSMonitor
Phobya 400mm radiator, EX 360mm radiator, misc ... Swiftech MCP35X2 Pump, Frozen_Q 250mm Liquid Fu... Windows 7 Ultimate Asus 1080P 
KeyboardPowerCaseMouse
OCN Edition Ducky with MX Blues Corsair HX 850 Corsair 600T Razor Lachesis 
  hide details  
Reply
Bubble Bee Tuna
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4770k@4.5 Asrock Z87 OC Formula 7970@1200/1600 6970@950/1450 
GraphicsRAMHard DriveHard Drive
6970@950/1450 Samsung Wonder Ram 120Gb Phoenix SSD 120Gb Phoenix SSD 
Hard DriveHard DriveOptical DriveCooling
1Tb Western Digital HDD 1Tb Western Digital HDD Slim Slot stealthed Heatkiller 3.0 CU, Heatkiller 7970 CU with back... 
CoolingCoolingOSMonitor
Phobya 400mm radiator, EX 360mm radiator, misc ... Swiftech MCP35X2 Pump, Frozen_Q 250mm Liquid Fu... Windows 7 Ultimate Asus 1080P 
KeyboardPowerCaseMouse
OCN Edition Ducky with MX Blues Corsair HX 850 Corsair 600T Razor Lachesis 
  hide details  
Reply
post #8963 of 14342
Awesome tip!

I see you and I visit the same Micro Center, so thanks for the inventory notice wink.gif
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #8964 of 14342
I decided to try out a different method of doing heatshrinkless paracord on fans... Turned out pretty well. I just used about 1.25x the cable length of paracord so it gets fatter, put the connector back on and the sleeve tries to get back to its normal size, which forces it to the end ot the wire on both sides. Melt the ends so they sit properly on the back of the connector, and you're set! I'll put a pic or two up in a bit.
WHITEOUT
(32 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570k MAXIMUS V GENE AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveHard DriveOptical Drive
Patriot Division 4 16GB DDR3 1866 Samsung 830 WD Black 1TB LG Blu-Ray Burner 
CoolingCoolingCoolingCooling
Monsoon Free Center Fittings (12) NZXT 120mm Fans (8) Swiftech MCP-655 XSPC Dual Bay D5 Res 
CoolingCoolingCoolingCooling
Ice Dragon Fluid Durelene Tubing EK FC 7970 CSQ Black Ice GTX 240 
CoolingCoolingCoolingCooling
EK 7970 CSQ EK FC Bridge Dual Parallel CSQ EK 7970 Backplate EK 7970 Backplate 
CoolingCoolingOSMonitor
EK 7970 Single Slot Bracket EK 7970 Single Slot Bracket Windows 7 Achieva Shimian 
KeyboardPowerCaseMouse
Logitech G11 Silversone ST1500 NZXT Switch 810 Cyborg R.A.T.7 
Mouse PadAudioOtherOther
Razer eXactMat Logitech Z-5500 Turtle Beach EarForce x11 Razer Onza 
  hide details  
Reply
WHITEOUT
(32 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570k MAXIMUS V GENE AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveHard DriveOptical Drive
Patriot Division 4 16GB DDR3 1866 Samsung 830 WD Black 1TB LG Blu-Ray Burner 
CoolingCoolingCoolingCooling
Monsoon Free Center Fittings (12) NZXT 120mm Fans (8) Swiftech MCP-655 XSPC Dual Bay D5 Res 
CoolingCoolingCoolingCooling
Ice Dragon Fluid Durelene Tubing EK FC 7970 CSQ Black Ice GTX 240 
CoolingCoolingCoolingCooling
EK 7970 CSQ EK FC Bridge Dual Parallel CSQ EK 7970 Backplate EK 7970 Backplate 
CoolingCoolingOSMonitor
EK 7970 Single Slot Bracket EK 7970 Single Slot Bracket Windows 7 Achieva Shimian 
KeyboardPowerCaseMouse
Logitech G11 Silversone ST1500 NZXT Switch 810 Cyborg R.A.T.7 
Mouse PadAudioOtherOther
Razer eXactMat Logitech Z-5500 Turtle Beach EarForce x11 Razer Onza 
  hide details  
Reply
post #8965 of 14342
Since i failed at removing pins to sleeve, i've had some interesting ideas as to how to use it all.
1. sleeve EL wire. i've only tried this with a semi transparent sleeve (moddiy gold) but it looks incredible.
2. sleeve zip ties, a pain to do, but looks cool
3. sleeve anti-kink wrap for WC loops. this will only work with paracord or shoelaces. normal sleeve it to hard to put on.
post #8966 of 14342
So I tried out the heatshrinkless method for my first time and it turned out a whole lot better than when I tried to use heatshrink..
post #8967 of 14342
Quote:
Originally Posted by Jwright0291 View Post

So I tried out the heatshrinkless method for my first time and it turned out a whole lot better than when I tried to use heatshrink..

Looks awesome! Hope mine turns out when I get that far!!
post #8968 of 14342
Quote:
Originally Posted by nleksan View Post

Awesome tip!

I see you and I visit the same Micro Center, so thanks for the inventory notice wink.gif

Small world after all. Some amazing weather we are having right??

I took some pictures of my setup to show you guys, and gals, what I did with my MCP35x2.


Heres an overall look from the front after I remove my GPU cables. *draining the water out of my system


Without the reservoir in the way, can see how I mounted it in there directly to the case. HS on the back has just enough room to be efficient without a fan


Great shot of the sleeving I was talking about. Not sure why the paracord cables look slightly off, but they are all the same piece cut. Look the same when in normal light. Also can see a thin temp probe I put between the HS and thermal pad so I can monitor its temperature with my Aquaero. Just for the giggles


And heres where I supply the power to it. I made my own connector with an old 8 pin extension. Split the 3 + lines with 3 - lines and hooked them into mini tamiya connectors. The third line(bottom of picture with MDPC sleeving) is a splitter to power my PWM fans and my CCFL for my T-Virus reservoir. I did it this way because I wasnt using those wires and didnt want to void my warranty.


This final picture is an overal view of the rig before I tore it down. You can see what I did with the PCIe cables, again I did it this way to avoid voiding my warranty. Also going to redo the 24 pin extension. Is ~6 inches now, going to need it to be ~12 inches long and with an angle at the end.

Sidenote: anyone know where to get one of these?? Directly from swiftech is the only place I can find it(separate from the WC kits), and they want more that what its worth to ship it.
Bubble Bee Tuna
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4770k@4.5 Asrock Z87 OC Formula 7970@1200/1600 6970@950/1450 
GraphicsRAMHard DriveHard Drive
6970@950/1450 Samsung Wonder Ram 120Gb Phoenix SSD 120Gb Phoenix SSD 
Hard DriveHard DriveOptical DriveCooling
1Tb Western Digital HDD 1Tb Western Digital HDD Slim Slot stealthed Heatkiller 3.0 CU, Heatkiller 7970 CU with back... 
CoolingCoolingOSMonitor
Phobya 400mm radiator, EX 360mm radiator, misc ... Swiftech MCP35X2 Pump, Frozen_Q 250mm Liquid Fu... Windows 7 Ultimate Asus 1080P 
KeyboardPowerCaseMouse
OCN Edition Ducky with MX Blues Corsair HX 850 Corsair 600T Razor Lachesis 
  hide details  
Reply
Bubble Bee Tuna
(20 items)
 
  
CPUMotherboardGraphicsGraphics
4770k@4.5 Asrock Z87 OC Formula 7970@1200/1600 6970@950/1450 
GraphicsRAMHard DriveHard Drive
6970@950/1450 Samsung Wonder Ram 120Gb Phoenix SSD 120Gb Phoenix SSD 
Hard DriveHard DriveOptical DriveCooling
1Tb Western Digital HDD 1Tb Western Digital HDD Slim Slot stealthed Heatkiller 3.0 CU, Heatkiller 7970 CU with back... 
CoolingCoolingOSMonitor
Phobya 400mm radiator, EX 360mm radiator, misc ... Swiftech MCP35X2 Pump, Frozen_Q 250mm Liquid Fu... Windows 7 Ultimate Asus 1080P 
KeyboardPowerCaseMouse
OCN Edition Ducky with MX Blues Corsair HX 850 Corsair 600T Razor Lachesis 
  hide details  
Reply
post #8969 of 14342
Quote:
Originally Posted by briddell View Post

If you are using a modular PSU, it doesn't matter. Can't you just reuse the cables you sleeved?

You really didn't get my point.. redface.gif
Deepsea Core
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570k Asrock extreme 6 Z77 Gigabyte HD 6970 OC2 Corsair Dominator 2x8GB (16GB in total) 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 60 gb Western Digital 2 TB HDD Toshiba StorE ALU2 ASUS DRW-24B5ST/BLK/B 
CoolingOSMonitorMonitor
Custom Water Cooling loop Windows 7 1920 x 1080 1024 × 768 
KeyboardPowerCaseMouse
Logitech G510 Corsair HX 1050 Custom Thermaltake Level 10 GT Cyborg M.M.O. 7 
Mouse PadAudioAudioAudio
SteelSeries QCK Medium Creative Xtreme Audio Bulk Creative Gigaworks T20 II Roccat Kave 
  hide details  
Reply
Deepsea Core
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570k Asrock extreme 6 Z77 Gigabyte HD 6970 OC2 Corsair Dominator 2x8GB (16GB in total) 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 60 gb Western Digital 2 TB HDD Toshiba StorE ALU2 ASUS DRW-24B5ST/BLK/B 
CoolingOSMonitorMonitor
Custom Water Cooling loop Windows 7 1920 x 1080 1024 × 768 
KeyboardPowerCaseMouse
Logitech G510 Corsair HX 1050 Custom Thermaltake Level 10 GT Cyborg M.M.O. 7 
Mouse PadAudioAudioAudio
SteelSeries QCK Medium Creative Xtreme Audio Bulk Creative Gigaworks T20 II Roccat Kave 
  hide details  
Reply
post #8970 of 14342
More sleeving from today, for the Parvum systems dudes....







New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cables and Sleeving
Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Cable Sleeving Gallery & Discussion