Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 16

post #151 of 5479
Hey just wondering if i should use the little heatsingk fan that came with my new p6x58D
in conjuction with my cpu cooler?
post #152 of 5479
Quote:
Originally Posted by OutlawII View Post
Hey just wondering if i should use the little heatsingk fan that came with my new p6x58D
in conjuction with my cpu cooler?
If it'll fit and it's not too loud, why not?
post #153 of 5479
Quote:
Originally Posted by Ghoxt View Post
I have 2 of these, mine at 4Ghz, absolutely love how easy it is to OC at 4Ghz. My GF gets the 2nd one..after I slide my 2nd SSD, Vid card, and 6Gig into mine. She need notknow of the delay lol.
lol, nice!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #154 of 5479
Quote:
Originally Posted by pfran42 View Post
OK, got the Corsair H50 and was gonna post in the Corsair forum but this issue has more to do with the motherboard so I am going to ask here. How do you set the chassis fan 2 connection to run at 100% 24X7? I plugged the H50 radiator fan into the MB CPU header and the pump connection into Chassis 2. I was watching install videos on YouTube and the Corsair rep was saying that you need to keep the pump running 100% at all times. How do you do this using Asus Fan Xpert? I have it in turbo mode but it only runs at around 1188 rpm at idle.

How are you guys setting the H50 up via motherboard settings? Are you trying to run the pump at full load 24X7?
Very simple actually. Go to - Power - Hardware Monitor - Set CPU Q-Fan Control to "Disabled" and the Chassis Q-Fan Control to "Disabled". Essentially what you're saying is, you dont want the Q-Fan Control to automatically adjust or take control over the fan speeds, you want it disabled so it runs full throttle (100%) at all times. When that is done, check your RPM's on the pump, it should be sitting around ~1450 rpm's. Alternatively, you can plug it into PWR_FAN and it will run at 100% also, since there is no Q-Fan Control over this one fan connector.
Edited by xmisery - 2/9/10 at 8:06pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #155 of 5479
Quote:
Originally Posted by ekovalsky View Post
Anyone try this new 0702 bios ? Notes mention only processor support but there may be more than that... I'll probably give it a try and report back.
Hmm, interesting. I just installed 0506, released (01/11/2010) about 2 weeks ago, which was a nice little upgrade. I just went to the Asus site to look for this 0702 release you speak of, but, didn't see it listed, just the 0604, released (01/29/2010). How did you come across this new 0702 version? I wonder if its still in some sort of beta testing, since it didn't show up officially in the motherboard's bios firmware update section?
Edited by xmisery - 2/9/10 at 8:07pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #156 of 5479
For me, any fan I want to run at 100% I plug it into a Molex (use adapter where necessary)
WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930@4.05GHz ASUS P6X58D-Preminum XFX GeForce 275 896mb 6GB Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
WD 150gb Raptor LightScan Win 7 64-bit Acer 22" 
KeyboardPowerCaseMouse
G15 Corsair HX620W Antec 1200 several various 
Mouse Pad
none 
  hide details  
Reply
WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930@4.05GHz ASUS P6X58D-Preminum XFX GeForce 275 896mb 6GB Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
WD 150gb Raptor LightScan Win 7 64-bit Acer 22" 
KeyboardPowerCaseMouse
G15 Corsair HX620W Antec 1200 several various 
Mouse Pad
none 
  hide details  
Reply
post #157 of 5479
Okay, I've done some more testing with this motherboard. For those who want to run their i7 920 D0's @ 4.20GHz at the lowest stable voltages, here are my BIOS settings.

NOTE: These settings were stable for me and should be for you as well. However, not all i7's are created equal, so YMMV. That said, these settings were tested against LinX - / Problem size: 25854 / Memory to use: 5120 / Times to run: 20. If you guys see some additional tweaks or changes to make this even better, please share.

==================================================
Users running Intel i7 920 Chips - (Settings Below)
==================================================



***************************************
Running 4.20GHz w/o HyperThreading (Stable)
***************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[200]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1603MHz]
UCLK Frequency.........................[3208MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.28750]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Disabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
**************************************
Running 4.20GHz w/ HyperThreading (Stable)
**************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[200]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1603MHz]
UCLK Frequency.........................[3208MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.31875]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.24375]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
==================================================
!!! UPDATE !!! - Using the "Offset" CPU Voltage Control w/ HT ==================================================

Follow the guides above and substitute with these settings below.
NOTE: These offset settings were contributed by BlackDragon24.

Code:
CPU Voltage Control....................[Offset]
CPU Voltage............................[0.11875]
QPI/DRAM Core Voltage..................[1.26250]
IOH Voltage............................[1.10]
ICH Voltage............................[1.10]

Load-Line Calibration..................[Disabled]
CPU Differential Amplitude.............[700mv]
CPU Clock Skew.........................[Normal]
IOH Clock Skew.........................[Normal]

C1E Support............................[Enabled]
Intel(r) SpeedStep(tm) Tech............[Enabled]
==================================================
Users running Intel i7 930 Chips - (Settings Below)
==================================================



**************************************
Running 4.20GHz w/o HyperThreading (Stable)
**************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[200]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1603MHz]
UCLK Frequency.........................[3208MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.32]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Disabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
**************************************
Running 4.20GHz w/ HyperThreading (Stable)
**************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[200]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1603MHz]
UCLK Frequency.........................[3208MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.35]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.335]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
NOTE: If these settings aren't stable for you, they should at least get you a good baseline to go by. You may need to slightly increase your "CPU Voltage" and/or "QPI/DRAM Core Voltage" one bump at a time from this point to get something stable for your specific chip.
Edited by xmisery - 7/18/10 at 6:45pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #158 of 5479
Quote:
Originally Posted by ekovalsky View Post
Anyone try this new 0702 bios ? Notes mention only processor support but there may be more than that... I'll probably give it a try and report back.
Just to follow-up I did flash to this new BIOS. Didn't see any changes. It did break Turbo-V though, moving the CPU Voltage slider and hitting apply would lock it in at 1.6v! Luckily I realized this before frying my CPU as the cores shot up to 100 instantly with Prime95 running. Had to stop prime then reboot to reset it to the BIOS-set voltage. I did load BIOS defaults and the problem persisted. So I reverted back to 0604 and it is now working fine again.

So at this point unless you have an new engineering sample CPU that otherwise isn't supported, I'd recommend skipping the 0702 BIOS. I think it will be posted on the main Asus support site tomorrow so beware.

Funny thing is I'm having a little better success overclocking the CPU now that it got zapped with major voltage for a few minutes. Actually got to 4.2v with some stability, at Vcore 1.35 and QPI/Dram 1.3. Temps were pushing 80 at full load so I backed down to 4 ghz, at slightly lower voltages that I needed before.
post #159 of 5479
Quote:
Originally Posted by xmisery View Post
tested against Intel Burn Test 2.4, using the "Very High" Stress Test, and 20 passes, Core Temps were 74,71,72,68.
Aren't these temperatures very uneven?
post #160 of 5479
Well...I just ordered mine today. Over the next couple weeks the case, RAM, and i7 920 will be ordered, and I already picked up a Venomous X. The rest is going to be pirated from my sig rig.

So excited to start to 4.0+ghz benching
Phrixus Rev2
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 ASUS P6X58D Premium MSI Cyclone GTX460 1GB SLi 6GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
WD Raptor 150 / WD 500 / WD 1TB x2 for Storage LITEON S-ATA Vista Ultimate x64 Gateway HD2200 x 2 
KeyboardPowerCaseMouse
Filco FKBN104MC/EB Corsair Professional Series AX850 Lancool PC-K62 Logitech G5 
  hide details  
Reply
Phrixus Rev2
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 ASUS P6X58D Premium MSI Cyclone GTX460 1GB SLi 6GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
WD Raptor 150 / WD 500 / WD 1TB x2 for Storage LITEON S-ATA Vista Ultimate x64 Gateway HD2200 x 2 
KeyboardPowerCaseMouse
Filco FKBN104MC/EB Corsair Professional Series AX850 Lancool PC-K62 Logitech G5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--