Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 216

post #2151 of 6325
Quote:
Originally Posted by rattlerskin View Post
My motherboard temp is consistently 28-29C and my chip idles at 29C and approx. 60C under load. What kind of case are you using and how much other cooling do you have? I'm no expert here, but I would venture to say those are pretty high temps for idle.
Right now I am running VCore 1.26 just shy of 4 gig. I'm at about 40% on all 4 cores. My CPU is 54C and the Board is 47C.

I have the H50 cooler blowing inwards as the manual states to do, though I still can't get my head around that.

It's a cooler Master case with a Two exhaust fans at the bottom, 1 fan blowing in from the side at the chipset and heat pipes, and 1 fan blowing down from the top over the RAM.

I still want to run a push pull system and exhust the heat outwards.

Will the Mobo tolerate 60 degrees without harm?
post #2152 of 6325
Just finished a 12 hour Prime 95 run with the following on an i7 930:

-4.2 Ghz -

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[200]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1603MHz]
UCLK Frequency.........................[3208MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.32]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Disabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
post #2153 of 6325
Quote:
Originally Posted by CPT Ethanolic View Post
Are you running a 920 or 930? If I set Vcore to 1.28, I get BSOD after about 5 minutes in Prime.

930.

When I first started oc'ing this board I went through all the same settings as xmisery with the my 930 and wrote down the stable vcore and qpi settings. unfortunately the sheet of paper was thrown out by mistake.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 Ghz Asus P6X58D Premium EVGA GTS 250 X 2 Corsair Dom 1600 1GX3 TR3X3G1600C8D 
Hard DriveOSPowerCase
WD VelociRaptor 300G Win XP 32b Corsair HX1000W CM 690 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 Ghz Asus P6X58D Premium EVGA GTS 250 X 2 Corsair Dom 1600 1GX3 TR3X3G1600C8D 
Hard DriveOSPowerCase
WD VelociRaptor 300G Win XP 32b Corsair HX1000W CM 690 
  hide details  
Reply
post #2154 of 6325
Quote:
Originally Posted by lux View Post
930.

When I first started oc'ing this board I went through all the same settings as xmisery with the my 930 and wrote down the stable vcore and qpi settings. unfortunately the sheet of paper was thrown out by mistake.
hmmm.. maybe I'll try dropping my CPU core and upping my QPI/DRAM.
post #2155 of 6325
Quote:
Originally Posted by Atlasprime View Post

******
O yes, almost fergot. Anyone able to use a usb keyboard in the bios? With my old evga 680i board it had USB support but my razer just straight up doesnt work and I dont see a setting in the BIOS for it. Any thoughts?
My Apple full size USB keyboard works just fine to access and change BIOS settings on p6x58d-e. You might want to try moving the keyboard to a back port, if connected to front. Or, try different ports.
WinuxMac
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 D0 @ 3.8Ghz, 1.14v Asus P6X58D-E MSI N260GTX OC Corsair Dominator 6GB DDR3 1600 
OSKeyboardPowerCase
Win7 x64, SL 10.6.3, Ubuntu 10.04 Filco Tenkeyless, Cherry Brown Corsair 750W CM HAF 922 + side 20cm fan 
  hide details  
Reply
WinuxMac
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 D0 @ 3.8Ghz, 1.14v Asus P6X58D-E MSI N260GTX OC Corsair Dominator 6GB DDR3 1600 
OSKeyboardPowerCase
Win7 x64, SL 10.6.3, Ubuntu 10.04 Filco Tenkeyless, Cherry Brown Corsair 750W CM HAF 922 + side 20cm fan 
  hide details  
Reply
post #2156 of 6325
With regards to the keyboard, one time I had to use the serial port adapter because the USB wouldn't work.
post #2157 of 6325
Can I buy G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL memory 2x to make it 8gb?

Will it run w/o a problem on the mobo when I attempt to do 8gb? I am having bad experience with 8gb Corsair memory.
Edited by SandHammer - 5/29/10 at 3:10pm
post #2158 of 6325





















post #2159 of 6325
Quote:
Originally Posted by SandHammer View Post
Can I buy G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL memory 2x to make it 8gb?

Will it run w/o a problem on the mobo when I attempt to do 8gb? I am having bad experience with 8gb Corsair memory.
Surprised you are having issues with Corsair. My Corsair RAM did not have any issues. Anyway, why would you go 8GB? The optimal solution for X58 is to use triple channel. 3x2GB + 3x1GB would give you 9GB. Which Corsairs did you purchase BTW?
WinuxMac
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 D0 @ 3.8Ghz, 1.14v Asus P6X58D-E MSI N260GTX OC Corsair Dominator 6GB DDR3 1600 
OSKeyboardPowerCase
Win7 x64, SL 10.6.3, Ubuntu 10.04 Filco Tenkeyless, Cherry Brown Corsair 750W CM HAF 922 + side 20cm fan 
  hide details  
Reply
WinuxMac
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 D0 @ 3.8Ghz, 1.14v Asus P6X58D-E MSI N260GTX OC Corsair Dominator 6GB DDR3 1600 
OSKeyboardPowerCase
Win7 x64, SL 10.6.3, Ubuntu 10.04 Filco Tenkeyless, Cherry Brown Corsair 750W CM HAF 922 + side 20cm fan 
  hide details  
Reply
post #2160 of 6325
Quote:
Originally Posted by mgutz View Post
Surprised you are having issues with Corsair. My Corsair RAM did not have any issues. Anyway, why would you go 8GB? The optimal solution for X58 is to use triple channel. 3x2GB + 3x1GB would give you 9GB. Which Corsairs did you purchase BTW?
I agree. If you are going with X58 then you should take advantage of Triple Channel

Cosair - life time warranty. If your product was dodgy, get a new one!
1st WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 D0 @4.5Ghz 1.39v P6X58D Premium Radeon 5850 @850/1200 Cosair Dom 3x2Gb 1600 7-7-7-20 @1290 6-6-6-18 
Hard DriveOptical DriveOSMonitor
Kingston SSD 64Gb V Series ASUS DVDRW Win7 Ultimate x64 Samsung 2233B 
PowerCase
OCZ 600W CM 932 
  hide details  
Reply
1st WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 D0 @4.5Ghz 1.39v P6X58D Premium Radeon 5850 @850/1200 Cosair Dom 3x2Gb 1600 7-7-7-20 @1290 6-6-6-18 
Hard DriveOptical DriveOSMonitor
Kingston SSD 64Gb V Series ASUS DVDRW Win7 Ultimate x64 Samsung 2233B 
PowerCase
OCZ 600W CM 932 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--