Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 226

post #2251 of 6358
Quote:
Originally Posted by nudniq View Post
http://www.overclock.net/intel-mothe...ml#post8440597
Would these be a good starting point?
xmisery's settings are solid. I had to up the CPU Voltage and QPI/DRAM Core Voltage a bit on mine to get it stable but that is a great starting point. I ended up with:


Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[181]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1451MHz]
UCLK Frequency.........................[2903MHz]
QPI Link Data Rate.....................[Auto]
CPU Voltage Control....................[Manual]
CPU Voltage............................[1.25625] shows 1.240 in cpu-z
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]
Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]
C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]

The Pudding


Edit to add that this is my first attempt at overclocking by the way. LOL
Edited by ~sizzzle~ - 6/9/10 at 4:40pm
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
post #2252 of 6358
Quote:
Originally Posted by JimmyMo View Post
Hey, right on, very cool! Thanks for testing it out.

Over at Xtremesystems.org, there is a thread there where they talk about some new features that got added?



Hmm. Not a lot of detail there, but it sounds like ASUS might have given us MOAR! Always nice.

A bit more voltage tweaking, and maybe I will try this BIOS . . . or, I might just load it, reset to default and begin a fresh xmisery template tweaking run!

-J
Yeah, I saw the drive expert thing when I was looking around but thought it may have been there before. It is basically a utility to setup SATA3 RAID in BIOS from what it looks like. I don't have the SATA3 controller enabled so I probably won't even be messing with that feature for a while.
post #2253 of 6358
Do any of you use prime95 blend test to check your stability?????? cus im still crashing.. i passed linx 100 times and memtest 18 hours blend test still screws me up :S :S
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
post #2254 of 6358
Quote:
Originally Posted by heptilion View Post
Do any of you use prime95 blend test to check your stability?????? cus im still crashing.. i passed linx 100 times and memtest 18 hours blend test still screws me up :S :S
I use IBT and LinX to stress test.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #2255 of 6358
how many hours of linx and IBT do you run for 24/7 sability?? so you dont think prime95 blend test is good??
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
post #2256 of 6358
Quote:
Originally Posted by heptilion View Post
Do any of you use prime95 blend test to check your stability?????? cus im still crashing.. i passed linx 100 times and memtest 18 hours blend test still screws me up :S :S
Prime has taken quite a bit more voltage to get stable. I can LinX all day long but at about 3 hours into prime95 I would get a BSOD.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 Asrock x370 Taichi Sapphire R9 Fury Gskill Ripjaw F4-3200c14-8gvk 
Hard DriveOSPowerCase
960 Evo M.2 W10 64 Seasonic 850 Prime Titanium  TJ07 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 Asrock x370 Taichi Sapphire R9 Fury Gskill Ripjaw F4-3200c14-8gvk 
Hard DriveOSPowerCase
960 Evo M.2 W10 64 Seasonic 850 Prime Titanium  TJ07 
  hide details  
Reply
post #2257 of 6358
Quote:
Originally Posted by gergregg View Post
Prime has taken quite a bit more voltage to get stable. I can LinX all day long but at about 3 hours into prime95 I would get a BSOD.
how much did u have to up the voltage to get prime95 stable??
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
post #2258 of 6358
Quote:
Originally Posted by heptilion View Post
how many hours of linx and IBT do you run for 24/7 sability?? so you dont think prime95 blend test is good??
I just find Prime95 takes forever to test for stability. Here are the settings I use when running LinX or IBT when stressing and looking for stability.

For LinX:
Problem size: 25854 / Memory to use: 5120 / Times to run: 20

For IBT:
Stress Level: Very High / Threads: 4 or 8 (don't use Auto) / Times to run: 20
Edited by xmisery - 6/9/10 at 9:18pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #2259 of 6358
yeah but dude i have tried both of them and have run them 100 times on linx and 25 times on IBT very high and they pass.. but when i run prime95 blend test it crash within and hour every time..

atm im running at this values and this is the only way i can run the blend test without crashing

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[172]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1376MHz]
UCLK Frequency.........................[2752MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.15670]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.2250]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Auto]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]

so atm my ram is running at 8x multiplier and it wont work at 10x cus everytime blend test crashes... it is annoying
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0 p6x58d premium Asus gtx 680 directcu ii top Corsair TR3X6G1600C8D 
Optical DriveOSMonitorKeyboard
Sony ad7240sgb 7 ultimate x64 Samsung 931c Logitech g15 
PowerCaseMouse
Corsair hx850 HAF 932 Logitech g500 
  hide details  
Reply
post #2260 of 6358
Quote:
Originally Posted by heptilion View Post
how much did u have to up the voltage to get prime95 stable??
vcore .041
qpi/dram .075

Those are what I had to add running at 4.4.


CPU Differential Amplitude.............[800mV]

Also, are you sure this setting is helping stability? You may want to try auto. I'm going to start messing with DA and skews shortly with this board, but right now I'm running auto.
Edited by gergregg - 6/9/10 at 10:58pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 Asrock x370 Taichi Sapphire R9 Fury Gskill Ripjaw F4-3200c14-8gvk 
Hard DriveOSPowerCase
960 Evo M.2 W10 64 Seasonic 850 Prime Titanium  TJ07 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 Asrock x370 Taichi Sapphire R9 Fury Gskill Ripjaw F4-3200c14-8gvk 
Hard DriveOSPowerCase
960 Evo M.2 W10 64 Seasonic 850 Prime Titanium  TJ07 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--