Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 25

post #241 of 6384
xmisery, thanks for posting all those settings.

unfortunately you seem to have a much better piece of D0 silicon than me. my i7-920 (D0, B#3923A766) seems to require much more Vcore to get stable running prime95 [small FFT test] for any extended period of time. minimum vcore for stability at 3.990 Ghz (190x21) is 1.29375v. this is with hyperthreading enabled with eight threads running, no doubt it could be dropped somewhat with hyperthreading disabled and only four threads running.

after finally determining my minimum Vcore at 3.99 Ghz, I now need to find the minimum QPI/Dram for the 190 bclk at this speed using Prime95 [blend]. fortunately my chip's uncore seems better than the core, and i will probably end up well below 1.25v.

i attached a little graph showing how your settings scale with frequency. looks like you are still in a linear range for vcore, so with sufficient cooling you could probably hit a lot higher.

i was curious about your ICH voltage settings of 1.2-1.3v, and IOH of 1.2v. necessary for stability or just raising it to remove it as a variable ? i also have raised my IOH to 1.2v, but am not convinced that raising the ICH (southbridge) would make much difference since it is removed from the CPU and RAM. also what differences have you found by changing CPU differential amplitude and skew ? i have kept them at auto, not really knowing what they do.
LL
Edited by ekovalsky - 2/12/10 at 2:30pm
post #242 of 6384
Just finished building with this MOBO with the i7 920 the TRUE 120 Extreme cooler with Scythe 120 fan. Corsair Dominator 3X2GB 1600C8D 8-8-8-24 with fan. Seagate 750 GB X2 7200.12 HD, Corsair HX850W, Corsair Obsidian 800D case, ASUS EAH 5850 video.
Have been using at stock for two weeks without problems. Will now get ready to try OC.

BTW, question about multipliers. Is there an advantage to reducing the multiplier from either 19, 20 or 21 to a lower number while increasing BCLK?

Thanks.
Paul
Paul's Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 ASUS P6X5r8D Premium ASUS EAH 5850 Corsair Dominator 3X2GB 1600C8D 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 750GBX2 7200.12 Plextor PX880SA WIN 7 Professional Samsung 
KeyboardPowerCaseMouse
Logitech Corsair HX850W Corsair Obsidian 800D Logitech 
  hide details  
Reply
Paul's Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 ASUS P6X5r8D Premium ASUS EAH 5850 Corsair Dominator 3X2GB 1600C8D 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 750GBX2 7200.12 Plextor PX880SA WIN 7 Professional Samsung 
KeyboardPowerCaseMouse
Logitech Corsair HX850W Corsair Obsidian 800D Logitech 
  hide details  
Reply
post #243 of 6384
Quote:
Originally Posted by maximus7651000 View Post
http://valid.canardpc.com/show_oc.php?id=1013403

benching on that @ 1.3 vcore in bios or 1.288 in cpuz. 212 x 21
Needless to say I required a bit more vcore to run that but I'm happy with the 4GHz and 4.2GHz settings.
900D
(22 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHz Asus Sabertooth Z87 EVGA GTX 1080 FTW HydroCopper GAMING Corsair Dominator Platinum 32GB  
Hard DriveHard DriveHard DriveCooling
Corsair Neutron XTI 480GB WD Black 2TB WD Black 4TB EK-Supremecy EVO Elite Edition Full Nickel wate... 
CoolingCoolingCoolingOS
XSPC AX 480 top rad  Alphacool UT 60 480 bottom rad Corsair SP120 high performance edition fans  Windows 7 Ultimate 64 bit 
MonitorMonitorMonitorKeyboard
Dell Ultrasharp U3014 30" 2560x1600 Asus ROG Swift PG278Q 27" 2560x1440 Samsung T260 25.5" 1920x1200 WASD Code 104 MX Clears / Deck Legend 105 Tacti... 
PowerCaseMouseMouse Pad
Corsair AX 1200i Corsair 900D Razer Mamba TE 16k DPI Razer 
AudioAudio
SoundBlaster X-Fi Fatality Pro HD with LM4562 O... Klipsh Audio 5.1  
  hide details  
Reply
900D
(22 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHz Asus Sabertooth Z87 EVGA GTX 1080 FTW HydroCopper GAMING Corsair Dominator Platinum 32GB  
Hard DriveHard DriveHard DriveCooling
Corsair Neutron XTI 480GB WD Black 2TB WD Black 4TB EK-Supremecy EVO Elite Edition Full Nickel wate... 
CoolingCoolingCoolingOS
XSPC AX 480 top rad  Alphacool UT 60 480 bottom rad Corsair SP120 high performance edition fans  Windows 7 Ultimate 64 bit 
MonitorMonitorMonitorKeyboard
Dell Ultrasharp U3014 30" 2560x1600 Asus ROG Swift PG278Q 27" 2560x1440 Samsung T260 25.5" 1920x1200 WASD Code 104 MX Clears / Deck Legend 105 Tacti... 
PowerCaseMouseMouse Pad
Corsair AX 1200i Corsair 900D Razer Mamba TE 16k DPI Razer 
AudioAudio
SoundBlaster X-Fi Fatality Pro HD with LM4562 O... Klipsh Audio 5.1  
  hide details  
Reply
post #244 of 6384
Quote:
Originally Posted by xmisery View Post
Also, just to make sure, I've been updating the OC settings, so be sure to look at post #2 in this thread and click the 4.01GHz link and verify the settings are the same. Keep me posted!
Xmisery, I verified my OC settings against your 4.01 Hhz link. The only difference is that I bumped CPU Voltage from [1.21250] to [1.21875]. ( I bumped this yesterday after 1 worker failed on FFT in Prime95.

I brought the system up and down several times today without incident (no BSOD). I ran IBT "Very High" 10 passes and have run Prime95 for nearly 4 hours and it's still running OK. (Max temps = 67c,62c,64c,60c - ambient = 23c)

We'll see tommorow A.M. when I boot the system up cold
Ed...
Edited by BlueFox - 2/12/10 at 9:11pm
Fox II
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 @ 4.01Ghz Asus P6X58D EVGA GTS250 01G-P3-1158TR Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
3 x WD3000HLFS (2 in Raid0) LITE-ON iHAS424-98 Win7 Ultimate x64/X86 2 x NEC LCD1990SX 
PowerCase
Corsair CMPSU-850HX HAF 922 
  hide details  
Reply
Fox II
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 D0 @ 4.01Ghz Asus P6X58D EVGA GTS250 01G-P3-1158TR Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
3 x WD3000HLFS (2 in Raid0) LITE-ON iHAS424-98 Win7 Ultimate x64/X86 2 x NEC LCD1990SX 
PowerCase
Corsair CMPSU-850HX HAF 922 
  hide details  
Reply
post #245 of 6384
Hey fellas need some help here! Had everything running at stock speeds just fine for about a day.Decided to do some overclocking,got into windows was running fine thought id try out mw2 it ran for awhile then blue screened with somthing about a pagefile,cant remember exactly what it said.
Anyway got back into bios and set everything back to defaults,set up my boot priority and so forth now it wont go past the windows 7 screen then monitor goes to no signal. Any ideas? This is a brand new build

i7 920
asus p6x58d
6 gigs g-skill F3-16000cl9T-6GBTD
2x spinpoint f3 in raid
1 f3 for backup
2x 285gtx
windows 7 64 bit
Primo
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7-7700k Asus Maximus Hero ix Evga GTX 1080 ACX 3.0 G-Skill F-43200C15D-16GTZKW 
Hard DriveHard DriveCoolingCooling
Samsung 850 Evo Corsair Neutron  Ek Supremacy CSQ clean OCOOL 360mm radiator 
CoolingCoolingOSKeyboard
OCOOL 360mm radiator Ek -FC1080 GTX  Windows 10 CM Storm 
PowerCaseMouse
Evga 750 watt Phanteks Enthoo Primo Roccat Kone Optical 
  hide details  
Reply
Primo
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7-7700k Asus Maximus Hero ix Evga GTX 1080 ACX 3.0 G-Skill F-43200C15D-16GTZKW 
Hard DriveHard DriveCoolingCooling
Samsung 850 Evo Corsair Neutron  Ek Supremacy CSQ clean OCOOL 360mm radiator 
CoolingCoolingOSKeyboard
OCOOL 360mm radiator Ek -FC1080 GTX  Windows 10 CM Storm 
PowerCaseMouse
Evga 750 watt Phanteks Enthoo Primo Roccat Kone Optical 
  hide details  
Reply
post #246 of 6384
I typed this up from a few P6X58D BIOS Screenshots, before I found out about this thread, so there is a little more choices on the list below. I do not have this motherboard yet, but i am getting it for an upcoming build. Before I start overclocking, I want to make sure that i have all the right settings. I am not sure if I should use 20 CPU multiplier with 200 BCLK, or 21 multiplier with 191 BCLK. Also, I need a lot of help with voltages, and some other settings. Any Help would be great....

-Ai Tweaker:
Ai Overclocker Tuner - [Manual]
CPU Ratio Setting - [20 or 21]
Intel (R) SpeedStep (TM) Tech - [Disabled]
Xtreme Phase Full Power Mode - [Enabled]
BLCK Frequency - [200 or 191]
PCIE Frequency - [120 MAX]
DRAM frequency - [1600]
UCLK frequency - [3200]
QPI Link Data Rate - [7218 MT/s]

CPU Voltage Control - [Manual]
CPU Voltage - [?]
CPU PLL Voltage - [?]
QPI/DRAM Core Voltage - [?]
IOH Voltage - [?]
IOH PCIE Voltage - [?]
ICH Voltage - [?]
ICH PCIE Voltage - [?]
DRAM DATA REF Voltage on CHA - [?]
DRAM CTRL REF Voltage on CHA - [?]
DRAM DATA REF Voltage on CHB - [?]
DRAM CTRL REF Voltage on CHB - [?]
DRAM DATA REF Voltage on CHC - [?]
DRAM CTRL REF Voltage on CHC - [?]

Load-Line Calibration - [Disabled]
CPU Differential Amplitude - [?]
CPU Clock Skew - [?]
CPU Spread Spectrum - [Disabled
IOH Clock Skew - [?]
PCIE Spread Spectrum - [Disabled]

-Advanced >>>CPU Configuration

CPU Ratio Setting - [20 or 21]
C1E Support -[Disabled]
Hardware Prefetcher - [Enabled]
Adjacent Cache Line Prefetch - [Enabled]
Intel (R) Virtualization Tech - [Enabled]
CPU TM Function - [Enabled]
Execute Disable Bit - [Enabled]
Intel (R) HT Technology - [Enabled]
Active Processor Cores - [All]
A20M - [?]
Intel SpeedStep (TM) Tech - [Disabled]
Intel (R) C-STATE Tech - [Disabled]
post #247 of 6384
Quote:
Originally Posted by OutlawII View Post
Hey fellas need some help here! Had everything running at stock speeds just fine for about a day.Decided to do some overclocking,got into windows was running fine thought id try out mw2 it ran for awhile then blue screened with somthing about a pagefile,cant remember exactly what it said.
Anyway got back into bios and set everything back to defaults,set up my boot priority and so forth now it wont go past the windows 7 screen then monitor goes to no signal. Any ideas? This is a brand new build

i7 920
asus p6x58d
6 gigs g-skill F3-16000cl9T-6GBTD
2x spinpoint f3 in raid
1 f3 for backup
2x 285gtx
windows 7 64 bit
Which OC did you attempt? 4GHz? Well either way, what you might have to do is bump up the CPU Voltage one notch and that should stabilize you. If not, might have to do it one again until it's stable for you. Each chip is slightly different, some may require a little extra voltage than others. Try that and report back.

EDIT: I just noticed in your sig rig that you have a C0 stepping. I believe those chips do require more voltage than the D0's. Try taking your CPU Voltage up 2 or 3 notches.
Edited by xmisery - 2/12/10 at 8:48pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #248 of 6384
What im saying is that i set everything back to default in the bios and i still cant get past the windows 7 screen, it just goes to no signal and thats it.
Primo
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7-7700k Asus Maximus Hero ix Evga GTX 1080 ACX 3.0 G-Skill F-43200C15D-16GTZKW 
Hard DriveHard DriveCoolingCooling
Samsung 850 Evo Corsair Neutron  Ek Supremacy CSQ clean OCOOL 360mm radiator 
CoolingCoolingOSKeyboard
OCOOL 360mm radiator Ek -FC1080 GTX  Windows 10 CM Storm 
PowerCaseMouse
Evga 750 watt Phanteks Enthoo Primo Roccat Kone Optical 
  hide details  
Reply
Primo
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7-7700k Asus Maximus Hero ix Evga GTX 1080 ACX 3.0 G-Skill F-43200C15D-16GTZKW 
Hard DriveHard DriveCoolingCooling
Samsung 850 Evo Corsair Neutron  Ek Supremacy CSQ clean OCOOL 360mm radiator 
CoolingCoolingOSKeyboard
OCOOL 360mm radiator Ek -FC1080 GTX  Windows 10 CM Storm 
PowerCaseMouse
Evga 750 watt Phanteks Enthoo Primo Roccat Kone Optical 
  hide details  
Reply
post #249 of 6384
Quote:
Originally Posted by Jtvd78 View Post
I typed this up from a few P6X58D BIOS Screenshots, before I found out about this thread, so there is a little more choices on the list below. I do not have this motherboard yet, but i am getting it for an upcoming build. Before I start overclocking, I want to make sure that i have all the right settings. I am not sure if I should use 20 CPU multiplier with 200 BCLK, or 21 multiplier with 191 BCLK. Also, I need a lot of help with voltages, and some other settings. Any Help would be great....

-Ai Tweaker:
Ai Overclocker Tuner - [Manual]
CPU Ratio Setting - [20 or 21]
Intel (R) SpeedStep (TM) Tech - [Disabled]
Xtreme Phase Full Power Mode - [Enabled]
BLCK Frequency - [200 or 191]
PCIE Frequency - [120 MAX]
DRAM frequency - [1600]
UCLK frequency - [3200]
QPI Link Data Rate - [7218 MT/s]

CPU Voltage Control - [Manual]
CPU Voltage - [?]
CPU PLL Voltage - [?]
QPI/DRAM Core Voltage - [?]
IOH Voltage - [?]
IOH PCIE Voltage - [?]
ICH Voltage - [?]
ICH PCIE Voltage - [?]
DRAM DATA REF Voltage on CHA - [?]
DRAM CTRL REF Voltage on CHA - [?]
DRAM DATA REF Voltage on CHB - [?]
DRAM CTRL REF Voltage on CHB - [?]
DRAM DATA REF Voltage on CHC - [?]
DRAM CTRL REF Voltage on CHC - [?]

Load-Line Calibration - [Disabled]
CPU Differential Amplitude - [?]
CPU Clock Skew - [?]
CPU Spread Spectrum - [Disabled
IOH Clock Skew - [?]
PCIE Spread Spectrum - [Disabled]

-Advanced >>>CPU Configuration

CPU Ratio Setting - [20 or 21]
C1E Support -[Disabled]
Hardware Prefetcher - [Enabled]
Adjacent Cache Line Prefetch - [Enabled]
Intel (R) Virtualization Tech - [Enabled]
CPU TM Function - [Enabled]
Execute Disable Bit - [Enabled]
Intel (R) HT Technology - [Enabled]
Active Processor Cores - [All]
A20M - [?]
Intel SpeedStep (TM) Tech - [Disabled]
Intel (R) C-STATE Tech - [Disabled]
You'll probably want to use the CPU Ratio setting of 21, as 20 i heard can be difficult to get a good OC from. That and it lowers your BCLK. You may want to check out post #2 that I made in this thread to help give you a good baseline to use for setting up the OC of your choice. I did 4 different ones, 3.6, 3.8, 4.0 and 4.2. I hope that helps.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #250 of 6384
Quote:
Originally Posted by OutlawII View Post
What im saying is that i set everything back to default in the bios and i still cant get past the windows 7 screen, it just goes to no signal and thats it.
As in the comp is running and the screen shows nothing? That would be graphic card problem. Maybe try reseating it or something. Unles you're talking about another problem then please describe it further

BTW: what's better? Venomous push/pull or corsair h50? They look to be about the same price. Venomous set up is a little more expensive but is it worth it
Edited by sora1607 - 2/12/10 at 10:07pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--