Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 243

post #2421 of 6368
Where is the Command Rate listed at in this board? I set the other timings manually but can't see where it's set to 2T (which CPUZ says I'm at now)
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
post #2422 of 6368
Quote:
Originally Posted by xBlitzerx View Post
Where is the Command Rate listed at in this board? I set the other timings manually but can't see where it's set to 2T (which CPUZ says I'm at now)
It would be this --

2nd Information:
DRAM Timing Mode: 2N
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #2423 of 6368
So 2N = 2T and 1N = 1T?
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
post #2424 of 6368
Quote:
Originally Posted by xBlitzerx View Post
So 2N = 2T and 1N = 1T?
Correct.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #2425 of 6368
Finally finished my build this week and am now trying hand @ my first OC. Stumbled across this board (naturally) and off the cuff tried xmisery's base guides but none came out stable for me within a minute of prime95 testing. I've read up on some of the basics here and sniffed around some more guides and applied those bits of knowledge to tweak some his guidelines - yet, i am still having no luck.

i'm aware that each board/chip is different but i should at least have gotten one of those base guides stable (even with slight tweaks). i don't suspect any hardware problems either because i can run stock and xmp profile fine w/out any problems. in any case, does anyone with similar specs as me care to share some stable OC settings?
n00Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-930 ASUS P6X58D Premium eVGA GTX-480 AR Corsair DDR3 12GB (1600MHz C7) 
Hard DriveOptical DriveOSMonitor
WD Velociraptor 150gB (OS) + Samsung F3 1tB (x4) Pioneer BDR-205 Windows 7 Ultimate (x64) Acer H243H + ASUS MS246H 
KeyboardPowerCaseMouse
Logitech Illuminated Antec TPQ-850w CM Storm Sniper (BE) Verbatim Wireless Slim 
Mouse Pad
some unicorn hide 
  hide details  
Reply
n00Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-930 ASUS P6X58D Premium eVGA GTX-480 AR Corsair DDR3 12GB (1600MHz C7) 
Hard DriveOptical DriveOSMonitor
WD Velociraptor 150gB (OS) + Samsung F3 1tB (x4) Pioneer BDR-205 Windows 7 Ultimate (x64) Acer H243H + ASUS MS246H 
KeyboardPowerCaseMouse
Logitech Illuminated Antec TPQ-850w CM Storm Sniper (BE) Verbatim Wireless Slim 
Mouse Pad
some unicorn hide 
  hide details  
Reply
post #2426 of 6368
Quote:
Originally Posted by anomalya View Post
Finally finished my build this week and am now trying hand @ my first OC. Stumbled across this board (naturally) and off the cuff tried xmisery's base guides but none came out stable for me within a minute of prime95 testing. I've read up on some of the basics here and sniffed around some more guides and applied those bits of knowledge to tweak some his guidelines - yet, i am still having no luck.

i'm aware that each board/chip is different but i should at least have gotten one of those base guides stable (even with slight tweaks). i don't suspect any hardware problems either because i can run stock and xmp profile fine w/out any problems. in any case, does anyone with similar specs as me care to share some stable OC settings?
I used xmisery's setting as well and was getting insta-fail. Then I turned off hyperthreading and now it works fine.
post #2427 of 6368
Quote:
Originally Posted by ootz0rz View Post
Hmm well I had left the original wax on to begin with, and only applied thermal paste recently thinking it might help. Made no difference at all though.

I was gonna go pick up a new cooler today but once again, out of stock...so I'll have to wait until tomorrow or Wednesday for that. When I do get it though, I shouldn't bother to apply new paste to it? (For a cooler master v8)

Once again though, my issue is...unless the stock heat sink/fan, cpu or motherboard is in some way defective, I should not be getting these temperatures with the sort of ambient room temperature I have? Isn't that correct? I don't really want to bother with over-clocking the CPU for now as I was thinking of getting a water-cooling solution for my system later on, so ideally I'd like to avoid purchasing a 3rd party air cooler if at all possible :/

*edit*
Also here's a screenshot of my system running prime95 + temperature read-outs. The thing that confuses me though is that the ASUS AI Suite shows acceptable temperature, but everything else does not? Although, from what I can tell, the temperature readouts from all the other software is in line with the BIOS.

http://img408.imageshack.us/img408/8168/temp2.png
Wow! Quit running Prime, your making me cringe with those temps!

Here's an idea. Check you BIOS, with my 930 and mobo (same as yours), I was getting higher than normal temps as well. Get CPUZ and check your vcore. The BIOS had it on auto for me, but was giving it way to much, over 1.2v. Which is way too much for stock speeds.

If that is the case, it should lower load temps by 20C or so.
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
post #2428 of 6368
Quote:
Originally Posted by CPT Ethanolic View Post
I used xmisery's setting as well and was getting insta-fail. Then I turned off hyperthreading and now it works fine.
Which setting did you use and did you apply any (small) tweaks? Ideally, i'd like to hit 4.0 ghz (or greater) for everyday use/adobe video editing sessions - is 4.0 too high for such purposes?
n00Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-930 ASUS P6X58D Premium eVGA GTX-480 AR Corsair DDR3 12GB (1600MHz C7) 
Hard DriveOptical DriveOSMonitor
WD Velociraptor 150gB (OS) + Samsung F3 1tB (x4) Pioneer BDR-205 Windows 7 Ultimate (x64) Acer H243H + ASUS MS246H 
KeyboardPowerCaseMouse
Logitech Illuminated Antec TPQ-850w CM Storm Sniper (BE) Verbatim Wireless Slim 
Mouse Pad
some unicorn hide 
  hide details  
Reply
n00Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-930 ASUS P6X58D Premium eVGA GTX-480 AR Corsair DDR3 12GB (1600MHz C7) 
Hard DriveOptical DriveOSMonitor
WD Velociraptor 150gB (OS) + Samsung F3 1tB (x4) Pioneer BDR-205 Windows 7 Ultimate (x64) Acer H243H + ASUS MS246H 
KeyboardPowerCaseMouse
Logitech Illuminated Antec TPQ-850w CM Storm Sniper (BE) Verbatim Wireless Slim 
Mouse Pad
some unicorn hide 
  hide details  
Reply
post #2429 of 6368
anomalya,

Nice build ! From my experience if your doing much video editing you are going to want to keep the hyperthreading on. I tried it both ways and there was a noticable improvement with the ht on. From what I've seen getting to 4.0 w/ht over 3.8w/ht is going to take a pretty good voltage increase with the temps that go along with that. Try it out for yourself and see if its worth it to you.

I running at 3.8 w/ht now. I used xmisery's template to get it. I don't think anybody can expect to plug in someone else's setting and have them work right off the bat. His templates are a great starting point for most it seems. Just slowly bump up the Core Voltage and QPI/Dram Core Voltage one at a time until you get stable. I'll post my specs but really they are not any different than the template except I pushed up those two setting until I got it to work for me. I'll tell you though I'm pretty sure I'm a little higher than I need to be on the Core Voltage because I bumped it a couple times in a row before going back and bumping the QPI wich got me stable. I should have stuck with one at a time. I left it as is for now though figuring it gives me a little head room.
Quote:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[181]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1451MHz]
UCLK Frequency.........................[2903MHz]
QPI Link Data Rate.....................[Auto]
CPU Voltage Control....................[Manual]
CPU Voltage............................[1.25625] shows 1.240 in cpu-z
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]
Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]
C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
post #2430 of 6368
I might have a noob question. It seems like I can't hit 4ghz easily, I've been at 3.8 for awhile with HT. I'm fine with that I guess.

I'm going to work on OC'ing my RAM next. Question is what gives more performance, the freq or timings?

I'm at 1600Mhz @ 7-8-7-24-2T right now.
Should I go for 2000mhz or try 7-7-7-20-1T?

Lastly, right now I'm at 200blck x 19 to hit 3.8. This allows 1600mhz exactly. To start overclocking the RAM with these settings or go back to the 181 x 21? If so, is there a difference between those two? Like will I need more or less vcore or other settings?
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
Desktop
(13 items)
 
  
CPUMotherboardGraphicsRAM
6600K @ 4.4 ASUS Z170 Pro MSI GTX 980ti Cosair Vengeance 2x8GB 2400MHz DDR4 
Hard DriveCoolingOSMonitor
Samsung EVO 500GB SSD | Barracuda 2TB HDD CM Hyper 212 EVO Windows 10 64 Bit Acer XB240H 
KeyboardPowerCaseMouse
Das Keyboard (MX Browns) Corsair RM750i Fractal Design - Refine R5 Logitech G402 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--