Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 249

post #2481 of 6368
Quote:
Originally Posted by Nakattk View Post
Is it ok for me to have all my fans plugged through molex via the psu, and non attached to the modo at all? I want all of them running at 100%, so I daisy chained them (5) to a molex plug in my HAF X.

Yeah, you can run all your fans off your PSU if you'd like. I'm not sure what the limitation would be (if any) on how many fans you can run off a single molex coming off the PSU, you may have to run it off two if you start adding too many. (someone verify that please) You can do the same off your motherboard too, but, you just have to go into BIOS and set Q-Fan control to 'disable', which allows it to run at 100%.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #2482 of 6368
Quote:
Originally Posted by jmaz87 View Post
Ok guys i'm starting to get desperate... I can't even post windows with anything close to anybodies settings... consequently my temps are not acceptable either (before i lapped cpu yesterday i was in 90's... now 80's)

how are u guys getting qpi/dram volts so low??? I've barely found stability at 1.65-1.7 with dram bus 1.64-1.66...

right now no matter what i try (even at 4.0) i cant load windows with less than 1.4qpi and i can only get IBT to pass at all at above settings with Vcore's in the 1.4's

PLEASE HELP ME!!!!
Hey, lets try and get you up and running here.

Let's start with a 3.8GHz OC. Put in all of the settings I have for the 930 @ 3.8 w/o HT and let's run some stress tests and see what you get back. Any error codes?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #2483 of 6368
Anybody know a range of innacuracy the on-die temps sensors can have on th i7 series?
post #2484 of 6368
Quote:
Originally Posted by kckyle View Post
you can try using the xmp profile.
lol the XMP profile won't even post BIOS
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
post #2485 of 6368
Quote:
Originally Posted by xmisery View Post
Hey, lets try and get you up and running here.

Let's start with a 3.8GHz OC. Put in all of the settings I have for the 930 @ 3.8 w/o HT and let's run some stress tests and see what you get back. Any error codes?

OK i will as soon as i get off work at 4PM FYI i set multiplyer down to 20
and current settings (working of memory)
Vcore ~1.456 cpu-z (1.43125 something like that)
qpi ~1.5 or 1.65
dram bus ~1.64

So 4.0Ghz 1600mhz 1N
I let P95 run last night a few hours then did 30passes on IBT Very high (+4Gb) just called roomate to put P95 back on blend test until i get home...

FYI i cant post win7 with anything around 1.35Vcore 1.5qpi...
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
post #2486 of 6368
Quote:
Originally Posted by cyclone3d View Post
Anybody know a range of innacuracy the on-die temps sensors can have on th i7 series?
when i had PCprobeII it would say the same temps as Realtemp at standard Clock but when i OC it would read 10-15c lower then Realtemp.

I uninstalled and haven't used it since...

also my temps were very high and i re-seated several times before just lapping everything. i'm seeing a 10-15c diff on load and 4-7c idle
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
post #2487 of 6368
oh yea the error code that comes to mind is 9c stop error
and another one saying interupt wasnt detected in allotted time on a 2ndary processor...
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
post #2488 of 6368
Quote:
Originally Posted by xmisery View Post
Hey, lets try and get you up and running here.

Let's start with a 3.8GHz OC. Put in all of the settings I have for the 930 @ 3.8 w/o HT and let's run some stress tests and see what you get back. Any error codes?
ok I was suprised to see it actually load windows. IBT now...

also my lowest Vcore is 1.25 befor Auto is that cuz of overvoltage jumper on mobo?
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
post #2489 of 6368
Are the NB/SB/Vreg temps fine on P6XD-E or does it get rather hot around 4ghz?

Is the premium really worth the extra 60$? Or should I just stick to the E version?
post #2490 of 6368
Quote:
Originally Posted by raizooor3 View Post
Are the NB/SB/Vreg temps fine on P6XD-E or does it get rather hot around 4ghz?

Is the premium really worth the extra 60$? Or should I just stick to the E version?
The highest temp I hav seen with a inf sensor was 54c that's with AS5 So now I have active air cooling but I seriously doubt u will have this prob I'm maxin NB


So my internet has been down since yesterday..
Right now 1.45 is lowest stable QPI and. Vcore is 1.464(CPUz)
1.45 in bios
I just ran 10 passes IBT very high avg60.77Gflops but temp highs were
90 90 87 86
times are 9-9-9-24-88 1T
21x200
nb 3200 qpi 3600
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
Karnivor 2.0
(17 items)
 
  
CPUMotherboardGraphicsRAM
6850K   ASUS X99-DELUXE II Nvidia Titan X(P)  G.SKILL TridentZ 3200 64GB 
Hard DriveHard DriveOptical DriveCooling
3x Intel 750 400GB U.2 WD Black 5TB  LG Electronics 14x SATA Blu-ray Internal Rewri... EKWB custom full loop 
CoolingOSMonitorKeyboard
EKWB titan x(p) full water block Windows 10 Pro 64-bit ASUS PG279Q 1440p @165hz IPS Corsair Strafe RGB cherry mx brown 
PowerCaseMouseMouse Pad
Antec HCP-1000   Phanteks Enthoo Primo Logitech G900 SUBZERO GAMING 
Audio
Bose QC35 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--