Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 27

post #261 of 6382
I've hit a bclk limit of 200. anything past that I can't get stable. I can run 200 *21 at 1.625 V for a cpu of 4.2 ghz all day long. Anything past 200 and it locks up on me. I've taken vcore all the way to 1.35v as well as qpi/vtt @ 1.35v. It'll load to windows but lock up within 30 sec's. any ideas? should I try 1.4V. Just seems like a lot of voltage to go from 4.2 @ 1.27 to 4.4 @ 1.4
Cerberus MKVI
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 4930k Asus Rampage IV BE 2 x 295x2 in Quad x-fire 16gb of Corsair Dominator Platnium DDR3 
Hard DriveHard DriveHard DriveOptical Drive
256gb Samsung 840 Pro 512gb Samsung 840 EVO 1gb Western Digital BE Asus Bluray/dvdrw burner 
CoolingOSMonitorKeyboard
Coolermaster 240mm AIO Windows 8.1 3x Benq BL 3200PT, 2 x asus 27" Logitech g19 
PowerCaseMouseAudio
Evga 1600 Watt PSU Corsair 540 Air Steelseries Sensei Onboard 
  hide details  
Reply
Cerberus MKVI
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 4930k Asus Rampage IV BE 2 x 295x2 in Quad x-fire 16gb of Corsair Dominator Platnium DDR3 
Hard DriveHard DriveHard DriveOptical Drive
256gb Samsung 840 Pro 512gb Samsung 840 EVO 1gb Western Digital BE Asus Bluray/dvdrw burner 
CoolingOSMonitorKeyboard
Coolermaster 240mm AIO Windows 8.1 3x Benq BL 3200PT, 2 x asus 27" Logitech g19 
PowerCaseMouseAudio
Evga 1600 Watt PSU Corsair 540 Air Steelseries Sensei Onboard 
  hide details  
Reply
post #262 of 6382
Quote:
Originally Posted by 00Smurf View Post
I've hit a bclk limit of 200. anything past that I can't get stable. I can run 200 *21 at 1.625 V for a cpu of 4.2 ghz all day long. Anything past 200 and it locks up on me. I've taken vcore all the way to 1.35v as well as qpi/vtt @ 1.35v. It'll load to windows but lock up within 30 sec's. any ideas? should I try 1.4V. Just seems like a lot of voltage to go from 4.2 @ 1.27 to 4.4 @ 1.4
Try 1.4v...I doubt you've hit a BCLK wall on the board...but your chip may be stubborn.
First AMD build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon II X4 620 *waiting for Phenom II X6* MSI 785GM-E65 4850 *waiting on MSI Cyclone 5850* 4GB OCZ Platinum DDR3 1333Mhz 7-7-7-20 
Hard DriveOptical DriveOSMonitor
Intel X25M 80GB/WD Caviar Blue 640GB/Green 1.5TB LG BDRW/Lite-On DVDRW Win 7 Pro 64-bit Dell S2309 1080P 
PowerCase
Corsair 650TX Lian-Li PC7-FNWX 
  hide details  
Reply
First AMD build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon II X4 620 *waiting for Phenom II X6* MSI 785GM-E65 4850 *waiting on MSI Cyclone 5850* 4GB OCZ Platinum DDR3 1333Mhz 7-7-7-20 
Hard DriveOptical DriveOSMonitor
Intel X25M 80GB/WD Caviar Blue 640GB/Green 1.5TB LG BDRW/Lite-On DVDRW Win 7 Pro 64-bit Dell S2309 1080P 
PowerCase
Corsair 650TX Lian-Li PC7-FNWX 
  hide details  
Reply
post #263 of 6382
Quote:
Originally Posted by liberalelephant View Post
Try 1.4v...I doubt you've hit a BCLK wall on the board...but your chip may be stubborn.
Going to try that now, I had it in my head that 1.35was max for this chip but as doing some reading in the 920 overclock thread and i see people going up to 1.65. I want 4.6ghz

Trying now will report back in a few.
Cerberus MKVI
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 4930k Asus Rampage IV BE 2 x 295x2 in Quad x-fire 16gb of Corsair Dominator Platnium DDR3 
Hard DriveHard DriveHard DriveOptical Drive
256gb Samsung 840 Pro 512gb Samsung 840 EVO 1gb Western Digital BE Asus Bluray/dvdrw burner 
CoolingOSMonitorKeyboard
Coolermaster 240mm AIO Windows 8.1 3x Benq BL 3200PT, 2 x asus 27" Logitech g19 
PowerCaseMouseAudio
Evga 1600 Watt PSU Corsair 540 Air Steelseries Sensei Onboard 
  hide details  
Reply
Cerberus MKVI
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 4930k Asus Rampage IV BE 2 x 295x2 in Quad x-fire 16gb of Corsair Dominator Platnium DDR3 
Hard DriveHard DriveHard DriveOptical Drive
256gb Samsung 840 Pro 512gb Samsung 840 EVO 1gb Western Digital BE Asus Bluray/dvdrw burner 
CoolingOSMonitorKeyboard
Coolermaster 240mm AIO Windows 8.1 3x Benq BL 3200PT, 2 x asus 27" Logitech g19 
PowerCaseMouseAudio
Evga 1600 Watt PSU Corsair 540 Air Steelseries Sensei Onboard 
  hide details  
Reply
post #264 of 6382
Quote:
Originally Posted by 00Smurf View Post
Going to try that now, I had it in my head that 1.35was max for this chip but as doing some reading in the 920 overclock thread and i see people going up to 1.65. I want 4.6ghz

Trying now will report back in a few.
I've also read that you can bump the PCIE Frequency up a couple notches, 100 to 102 or 103. I wouldn't go to much more after that though. Supposedly, it helps get people past the wall.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #265 of 6382
Quote:
Originally Posted by fallen again View Post
hey xmisery, i noticed that some of your voltage / amplitude settings have been changed in the above profile from the initial ones I borrowed from you a week and some ago, would you suggest that I mod my other settings to match your profile or should I leave my current ones as is?) I haven't had a single BSOD since reporting stability after that bump in cpu voltage (and ive been encoding ever since, ive already ripped through 2600 episodes at 5 bitrates, with non stop encoding going for the last 72 or so hours). For your reference, my current settings are:
Yeah, I've been making little updates to each profile, as I keep re-testing and get feedback from everyone. Honestly, if you're currently stable right now and have no issues, 1.25v is pretty respectable @ 4.01GHz. If you felt the need to try and lower the vcore down to the settings I posted, you could give that a try (if you're bored and/or don't mind waiting for your array to rebuild if it gives you a bsod.) You may see slightly better temps on your CPU, but, it's really your call.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #266 of 6382
xmisery, you're all the way down to 1.19 volts, wow. Would you mind posting your settings. I'd be very interested in seeing what the differences are between your previous settings.

Thanks
post #267 of 6382
Quote:
Originally Posted by xmisery View Post
I've also read that you can bump the PCIE Frequency up a couple notches, 100 to 102 or 103. I wouldn't go to much more after that though. Supposedly, it helps get people past the wall.
So far haven't had to do that. 1.4 did the trick.

this is where I am at now, 21*211 @ 1.4v and 1.4qpi (how much of a difference does qpi make? i've been setting it same as vcore) mem is at 1686mhz

Cerberus MKVI
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 4930k Asus Rampage IV BE 2 x 295x2 in Quad x-fire 16gb of Corsair Dominator Platnium DDR3 
Hard DriveHard DriveHard DriveOptical Drive
256gb Samsung 840 Pro 512gb Samsung 840 EVO 1gb Western Digital BE Asus Bluray/dvdrw burner 
CoolingOSMonitorKeyboard
Coolermaster 240mm AIO Windows 8.1 3x Benq BL 3200PT, 2 x asus 27" Logitech g19 
PowerCaseMouseAudio
Evga 1600 Watt PSU Corsair 540 Air Steelseries Sensei Onboard 
  hide details  
Reply
Cerberus MKVI
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 4930k Asus Rampage IV BE 2 x 295x2 in Quad x-fire 16gb of Corsair Dominator Platnium DDR3 
Hard DriveHard DriveHard DriveOptical Drive
256gb Samsung 840 Pro 512gb Samsung 840 EVO 1gb Western Digital BE Asus Bluray/dvdrw burner 
CoolingOSMonitorKeyboard
Coolermaster 240mm AIO Windows 8.1 3x Benq BL 3200PT, 2 x asus 27" Logitech g19 
PowerCaseMouseAudio
Evga 1600 Watt PSU Corsair 540 Air Steelseries Sensei Onboard 
  hide details  
Reply
post #268 of 6382
Quote:
Originally Posted by capt_zman View Post
xmisery, you're all the way down to 1.19 volts, wow. Would you mind posting your settings. I'd be very interested in seeing what the differences are between your previous settings.

Thanks
I don't have that system next to me at the moment, but, if I recall, the settings should be pretty much identical to the ones I posted for the 4.01GHz OC. The only difference is I was able to bring my CPU Voltage down to that ~1.19v. I'll verify though in a few weeks when I return home if you need those settings still.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #269 of 6382
Anyone with any idea what's better between Corsair H50 and a Venomous push/pull config?
post #270 of 6382
Quote:
Originally Posted by sora1607 View Post
Anyone with any idea what's better between Corsair H50 and a Venomous push/pull config?
Honestly, I think it's a pretty close call. I've seen H50's with slightly better temps than the VX, but, I've also seen VX's with slightly better temps than the H50. Everyone has different cases and fans and additional cooling, so each testing environment has been unique. I would probably just choose which one is in your budget at the time of purchase. I personally run the H50 and think it's the best and simplest closed loop water cooler since sliced bread. There is no maintenance to do on it whatsoever and its pretty small compared to some of the bigger air coolers on the market. I don't think you can go wrong with either choice though, both will treat you right!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--