Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 4

post #31 of 5562
Quote:
Originally Posted by IEATFISH View Post
I'm not sure I did a good job with the TIM but my ambient is about 72-74F. I idle about 42-47C and load in Prime95 on type 2 (the maximum heat one) at 75-78C. That's with the settings I linked above. My case is not that great for air flow and I only have one Gentle Typhoon on it. It's also plugged into the MB so it might have some more headroom. I'd say with 2 nice fans, good TIM application, and a better case I could get those temps down AT LEAST 10C.
Yeah, I'm thinking the same thing. Slap a 2nd fan on it and maybe try re-applying the TIM and see what happens.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #32 of 5562
Quote:
Originally Posted by liberalelephant View Post
No like P6T's would turn the turbo off intermittently when you hit 80C and ASUS refused to fix it even though it was a simple BIOS fix. They fixed the P6TD's and WS boards but the BIOS's that fixed those were "unofficial" BIOS's. They wouldn't fix the P6T's so I sold mine and left a big rant on Asus's forums lol. Other than the turbo throttling I loved everything else about the board.
Hmm, not sure if they did or not on this board, or with their latest firmware rather. I haven't really gone over 80c but I could try testing it out for you if you wanted? What tool/utility did you use to monitor whether the turbo function would shutoff after reaching 80c?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #33 of 5562
Quote:
Originally Posted by xmisery View Post
Hmm, not sure if they did or not on this board, or with their latest firmware rather. I haven't really gone over 80c but I could try testing it out for you if you wanted? What tool/utility did you use to monitor whether the turbo function would shutoff after reaching 80c?
http://www.xtremesystems.org/forums/...d.php?t=225450

it doesn't show up in CPUZ and it would sometimes show up in core temp but this program shows fluctuations of turbo by the second. I think they fixed it on this board (I am just presuming they did) but would like confirmation . Thanks.
First AMD build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon II X4 620 *waiting for Phenom II X6* MSI 785GM-E65 4850 *waiting on MSI Cyclone 5850* 4GB OCZ Platinum DDR3 1333Mhz 7-7-7-20 
Hard DriveOptical DriveOSMonitor
Intel X25M 80GB/WD Caviar Blue 640GB/Green 1.5TB LG BDRW/Lite-On DVDRW Win 7 Pro 64-bit Dell S2309 1080P 
PowerCase
Corsair 650TX Lian-Li PC7-FNWX 
  hide details  
Reply
First AMD build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon II X4 620 *waiting for Phenom II X6* MSI 785GM-E65 4850 *waiting on MSI Cyclone 5850* 4GB OCZ Platinum DDR3 1333Mhz 7-7-7-20 
Hard DriveOptical DriveOSMonitor
Intel X25M 80GB/WD Caviar Blue 640GB/Green 1.5TB LG BDRW/Lite-On DVDRW Win 7 Pro 64-bit Dell S2309 1080P 
PowerCase
Corsair 650TX Lian-Li PC7-FNWX 
  hide details  
Reply
post #34 of 5562
Quote:
Originally Posted by liberalelephant View Post
http://www.xtremesystems.org/forums/...d.php?t=225450

it doesn't show up in CPUZ and it would sometimes show up in core temp but this program shows fluctuations of turbo by the second. I think they fixed it on this board (I am just presuming they did) but would like confirmation . Thanks.
Okay, I'll check that out tomorrow when I get a chance to play.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #35 of 5562
Okay, I've done some more testing with this motherboard. For those who want to run their i7 920 D0's @ 4.01GHz at the lowest stable voltages, here are my BIOS settings.

NOTE: These settings were stable for me and should be for you as well. However, not all i7's are created equal, so YMMV. That said, these settings were tested against LinX - / Problem size: 25854 / Memory to use: 5120 / Times to run: 20. If you guys see some additional tweaks or changes to make this even better, please share.

***************************************
Running 4.01GHz w/o HyperThreading (Stable)
***************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz]
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.22500]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.21875]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
**************************************
Running 4.01GHz w/ HyperThreading (Stable)
**************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz]
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.23125]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.21875]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
==================================================
!!! UPDATE !!! - Users running Intel i7 930 Chips
==================================================

Follow the guides above and substitute with these settings below.

**************************************
Running 4.01GHz w/o HyperThreading (Stable)
**************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz]
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.20]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.21875]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Disabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
**************************************
Running 4.01GHz w/ HyperThreading (Stable)
**************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[191]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1531MHz]
UCLK Frequency.........................[3063MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.25000]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.21875]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
If those don't work, you can also try updating your CPU Voltage and QPI/DRAM with these settings as well.

Code:
CPU Voltage............................[1.26875] 
QPI/DRAM Core Voltage..................[1.23750]
- A little higher voltages
Code:
CPU Voltage............................[1.31250]
QPI/DRAM Core Voltage..................[1.28750]

NOTE: If these settings aren't stable for you, they should at least get you a good baseline to go by. You may need to slightly increase your "CPU Voltage" and/or "QPI/DRAM Core Voltage" one bump at a time from this point to get something stable for your specific chip.
Edited by xmisery - 11/27/10 at 10:32am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #36 of 5562
Cant wait to get this beauty!!!
post #37 of 5562
Thread Starter 
does anyone have any experience with asatek 240mm rads? i'm thinking about going for one of these setups for cpu+gpu liquid cooling.
post #38 of 5562
Quote:
Originally Posted by xmisery View Post
For those who want to run their i7 920's @ 4GHz at the lowest stable voltage, on the P6X58D motherboard, here are my BIOS settings.

NOTE: These settings were stable for me and should be for you as well. However, not all i7's are created equal, so YMMV. That said, these settings were tested against Intel Burn Test 2.4, using the High Stress Test, and 20 passes. If you guys see some additional tweaks or changes to make this even better, please share.

Ai Overclock Tuner [Manual]
CPU Ratio Setting [21.0]
BCLK Frequency [191]
PCIE Frequency [100]
QPI Link Data Rate [Auto]

CPU Voltage Control [Manual]
CPU Voltage [1.20625]
CPU PLL Voltage [1.80]
QPI/DRAM Core Voltage [1.22500]
IOH Voltage [1.20]
IOH PCIE Voltage [Auto]
ICH Voltage [1.20]
ICH PCIE Voltage [Auto]
DRAM Bus Voltage [Auto]

Load-Line Calibration [Enabled]
CPU Differential Amplitude [800mV]
CPU Clock Skew [Delay 300ps]
CPU Spread Spectrum [Disabled]
IOH Clock Skew [Auto]
PCIE Spread Spectrum [Disabled]

C1E Support [Disabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetch [Enabled]
Intel(r) Virtualization Tech [Enabled]
CPU TM Function [Enabled]
Execute Disable Bit [Enabled]
Intel(r) HT Technology [Disabled]
Active Processor Cores [All]
A20M [Disabled]
Intel(r) SpeedStep(tm) Tech [Disabled]
Intel(r) C-STATE Tech [Disabled]
Thank you for providing your overclock settings, I inputted them exactly as indicated and also ran the intel burn test (high for 20 passes) and it seems I passed as well.

My prior overclock settings unfortunately would have me rebooting randomly without warning or BSOD -- my os is set to not reboot on BSOD so I can see what the errors are (and i had a higher cpu voltage @1.3 -- was trying to maintain a stable overclock at 4.0, although my BCLK was 190 instead of 191 @ 21x multiplier). It's strange because my prior settings I had running prime 95 (mixed cpu/ram test) for approx 14-16 hours, and I even managed to encode without issue for approx 30 hours until the boot happened this morning.

Would you recommend any other type of stress testing to ensure the stability of my system? I've tried using prime 95 before (although not with these settings) but I'm unsure how long I shoul be running the test for, and which setting to use to replicate real world processing loads.

My rig will be used for 24/7 h264 video encoding, so the cpu loads will be constantly high in real world application.

One thing I'm very happy with regarding your settings: My idle temps are now approx 28-30 degrees, with load in the mid 50s (am using the corsair H50 cooling system) -- a difference of approx 10-15 degrees from my prior settings. I am also using Corsair Dominator ram, although i don't know if they are "GT" (mine are TR3X6G16000C8D) and I noticed with your settings my timings are doing 8-8-8-20 instead of 8-8-8-24 (I originally had the XMP overclock profile instead of manual, but sticking to your profile i left everything ram related on auto).

I really do appreciate the profile you provided though, and knowing what I can do to guarantee a stable overclock (further testing, etc) would be really helpful (as the reboots mess up my encoding progress / potentially ruin the content).
Edited by fallen again - 2/6/10 at 5:56am
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 [SLBEJ / Batch 3945A942] Asus P6X58D Premium BFG Geforce 9600GT Corsair Dominator GT 12GB DDR3 [1600Mhz] 
Hard DriveOSMonitorKeyboard
WD Black 2TB*2, 1TB*4 Windows 7 Ultimate X64 Samsung 305T Logitech G15 
PowerCaseMouse
Corsair HX Series CMPSU-850HX 850W Antec P193B Logitech G5 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 [SLBEJ / Batch 3945A942] Asus P6X58D Premium BFG Geforce 9600GT Corsair Dominator GT 12GB DDR3 [1600Mhz] 
Hard DriveOSMonitorKeyboard
WD Black 2TB*2, 1TB*4 Windows 7 Ultimate X64 Samsung 305T Logitech G15 
PowerCaseMouse
Corsair HX Series CMPSU-850HX 850W Antec P193B Logitech G5 
  hide details  
Reply
post #39 of 5562
Guys how is the sound quality on these mobos?
post #40 of 5562
Sign me up. Just got mine installed. First boot no probs.

Still figuring out the ram voltage and such. I don't think my ram is setup correctly. I need to up the voltage I think. Need to dig around in the bios a little more. I'm new to DDR3

I'm not going to even mention temps until I install my TRUE.

My bolt threw kit comes today in the mail. Will OC and prime afterwards.

I'm loving this board though. Going to post a build log and pics soon.
Mega Red
(17 items)
 
Part of me
(4 items)
 
Small but Big
(11 items)
 
CPUMotherboardGraphicsGraphics
i7 920 Asus P6X58D Premium EVGA GTX 460 SC EE  EVGA GTX 460 SC EE 
RAMRAMHard DriveHard Drive
Corsair Dominator Corsair Dominator Samsung Spinpoint F3 Samsung 830 SSD 
Optical DriveCoolingOSMonitor
Samsung DVR Thermalright TRUE Black Windows 7 x64 Premium Samsung T240HD 
KeyboardPowerCaseMouse
Razer Blackwidow Seasonic 850 S12D Azza 4000 Cooler Master Spawn 
Mouse Pad
Ratpadz GS 
Hard DriveOptical DrivePowerCase
Samsung Spinpoint F3 LG DVD Diablotek 350 SFF Azza 4000 
CPUMotherboardGraphicsRAM
AMD Phenom II 945 Asus M488TI deluxe ATI 6770 G Skill Sodimm 204 1333 8GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128 Samsung spinpoint 1TB Lite on bluray Scythe low profile 
OSPowerCase
windows 8 Silverstone 450 Coolermaster elite 120 
  hide details  
Reply
Mega Red
(17 items)
 
Part of me
(4 items)
 
Small but Big
(11 items)
 
CPUMotherboardGraphicsGraphics
i7 920 Asus P6X58D Premium EVGA GTX 460 SC EE  EVGA GTX 460 SC EE 
RAMRAMHard DriveHard Drive
Corsair Dominator Corsair Dominator Samsung Spinpoint F3 Samsung 830 SSD 
Optical DriveCoolingOSMonitor
Samsung DVR Thermalright TRUE Black Windows 7 x64 Premium Samsung T240HD 
KeyboardPowerCaseMouse
Razer Blackwidow Seasonic 850 S12D Azza 4000 Cooler Master Spawn 
Mouse Pad
Ratpadz GS 
Hard DriveOptical DrivePowerCase
Samsung Spinpoint F3 LG DVD Diablotek 350 SFF Azza 4000 
CPUMotherboardGraphicsRAM
AMD Phenom II 945 Asus M488TI deluxe ATI 6770 G Skill Sodimm 204 1333 8GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128 Samsung spinpoint 1TB Lite on bluray Scythe low profile 
OSPowerCase
windows 8 Silverstone 450 Coolermaster elite 120 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--