Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 467

post #4661 of 6378
Sig Rig is what I'm using.

Used a "Beginners Guide", and this is what I could come up with.

Any suggestions to help tighten some screws would be greatly appreciated. Would love to know if I could see 4.2, or lower temps, etc.

Blk 134
cpu V 1.22500
Dram Bus V 1.5
QP 1.20000

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[25.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[160]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1604MHz]
UCLK Frequency.........................[3200MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.30000]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.21875]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
"Emmett"
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 (4.0 @ 1.3v, HT, 70c) ASUS P6X58D-E Sapphire 6970 2GB Corsair 6GB XMS3 1600 7-7-7x20 
Hard DriveOSMonitorKeyboard
OCZ Vertex 2 90GB + Samsung F3 1TB Windows 7 64b HP ASUS 24" 1080p Logitech K800 Wireless Illuminated 
PowerCaseMouse
Corsair 850HX Modded Lancool PC-K62 Logitec M505 
  hide details  
Reply
"Emmett"
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 (4.0 @ 1.3v, HT, 70c) ASUS P6X58D-E Sapphire 6970 2GB Corsair 6GB XMS3 1600 7-7-7x20 
Hard DriveOSMonitorKeyboard
OCZ Vertex 2 90GB + Samsung F3 1TB Windows 7 64b HP ASUS 24" 1080p Logitech K800 Wireless Illuminated 
PowerCaseMouse
Corsair 850HX Modded Lancool PC-K62 Logitec M505 
  hide details  
Reply
post #4662 of 6378
Quote:
Originally Posted by BlackDragon24 View Post
Anybody achieve a successful overclock on this board (~4.2ghz, 1600mhz memory) with 3x4GB modules? If so, any recommendations on 3x4GB sets?

I've started building an HTPC library and 6GB just doesn't cut it for all of the x264 encoding I'll be doing.
Hi,

My board working stable @4.2Ghz with 6 x 2GB = 12GB Corsair Dominator rams. But you must change DRAM Frequency [DDR3-1203] and UCLK Frequency [2406Mhz]
If I keep DRAM Frequency DDR3-1600 my board seeing only 8GB ram.
FlyHigh
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 930 @ 4.2 Asus P6X58D Premium Asus HD6950 Corsair Dominator 12GB (6 x 2GB) TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
Crucial RealSSD C300 CTFDDAC256MAG-1G1 2.5" 256GB LG Blu-ray Burner Windows 7 64bit Home Premium Dell U3011 30" 
PowerCase
CORSAIR HX Series CMPSU-620HX 620W Lian Li Lancool PCK7 
  hide details  
Reply
FlyHigh
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 930 @ 4.2 Asus P6X58D Premium Asus HD6950 Corsair Dominator 12GB (6 x 2GB) TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
Crucial RealSSD C300 CTFDDAC256MAG-1G1 2.5" 256GB LG Blu-ray Burner Windows 7 64bit Home Premium Dell U3011 30" 
PowerCase
CORSAIR HX Series CMPSU-620HX 620W Lian Li Lancool PCK7 
  hide details  
Reply
post #4663 of 6378
Hey everyone. I thought I would share my new overclock settings. Taking the advice of some of the previous posters, I was able to have all the energy saving features turned on while still have a stable overclock. To achieve this, you must use the offset voltage control. I hope this helps anyone out who is overclocking.

Lastly, one big thing that helped me to achieve stability was raising my IOH Voltage. If I didn't do this, I would get random freezes even though my computer passed all stability tests.

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[19.0]
Intel(r) SpeedStep(tm) Tech............[Enabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[195]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1560MHz]
UCLK Frequency.........................[3120MHz]
QPI Link Data Rate.....................[Auto]

CAS# Latency...........................[8]
CAS# Delay.............................[8]
RAS# Pre Time..........................[8]
Ras# Act Time..........................[24]
REF Cycle Time.........................[1N]

CPU Voltage Control....................[Offset]
CPU Voltage............................[0.09375]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.20000]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Disabled]
CPU Differential Amplitude.............[Auto]
CPU Clock Skew.........................[Auto]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Enabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Enabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Enabled]
Intel(r) C-STATE Tech..................[Disabled]
Arc-Win10
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 Asus P6X58D-E Asus Radeon R9 270 OCZ Gold 6GB DDR3 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 128GB Western Digital WD6401AALS Samsung Spinpoint F1 HD103UJ Samsung SH-S223L 
CoolingOSMonitorKeyboard
Noctua NH-U12P SE1366 Window 10 Professional Dell S2309W Logitech G110 
PowerCaseMouseMouse Pad
Corsair HX650W Fractal Design Arc Midi Logitech G400 Steelseries QCK 
Audio
Klipsch ProMedia 2.1 
  hide details  
Reply
Arc-Win10
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 Asus P6X58D-E Asus Radeon R9 270 OCZ Gold 6GB DDR3 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 128GB Western Digital WD6401AALS Samsung Spinpoint F1 HD103UJ Samsung SH-S223L 
CoolingOSMonitorKeyboard
Noctua NH-U12P SE1366 Window 10 Professional Dell S2309W Logitech G110 
PowerCaseMouseMouse Pad
Corsair HX650W Fractal Design Arc Midi Logitech G400 Steelseries QCK 
Audio
Klipsch ProMedia 2.1 
  hide details  
Reply
post #4664 of 6378
Quote:
Originally Posted by Cloudbreaker View Post
Sig Rig is what I'm using.

Used a "Beginners Guide", and this is what I could come up with.

Any suggestions to help tighten some screws would be greatly appreciated. Would love to know if I could see 4.2, or lower temps, etc.

Blk 134
cpu V 1.22500
Dram Bus V 1.5
QP 1.20000

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[25.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[160]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1604MHz]
UCLK Frequency.........................[3200MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.30000]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.21875]
IOH Voltage............................[1.12]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
Try lowering your CPU Voltage. Lower it by one step, then test for stability again. If it is still stable, lower it again until it isn't stable. Then raise it one step. Everything else seems fine. I would also recommend using either LinX or IBT for stability testing as they are much quicker than Prime95 at finding errors. Once you have lowered your cpu voltage enough, you can run Prime95 for a few hours to be sure that everything is stable.
Arc-Win10
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 Asus P6X58D-E Asus Radeon R9 270 OCZ Gold 6GB DDR3 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 128GB Western Digital WD6401AALS Samsung Spinpoint F1 HD103UJ Samsung SH-S223L 
CoolingOSMonitorKeyboard
Noctua NH-U12P SE1366 Window 10 Professional Dell S2309W Logitech G110 
PowerCaseMouseMouse Pad
Corsair HX650W Fractal Design Arc Midi Logitech G400 Steelseries QCK 
Audio
Klipsch ProMedia 2.1 
  hide details  
Reply
Arc-Win10
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 Asus P6X58D-E Asus Radeon R9 270 OCZ Gold 6GB DDR3 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 830 128GB Western Digital WD6401AALS Samsung Spinpoint F1 HD103UJ Samsung SH-S223L 
CoolingOSMonitorKeyboard
Noctua NH-U12P SE1366 Window 10 Professional Dell S2309W Logitech G110 
PowerCaseMouseMouse Pad
Corsair HX650W Fractal Design Arc Midi Logitech G400 Steelseries QCK 
Audio
Klipsch ProMedia 2.1 
  hide details  
Reply
post #4665 of 6378
Good evening everyone. Hope all is well.

I apologize if this issue has been brought up but I really don't have the time to go through 400 pages and would appreciate your insight.

Though a new member I'm not new to overclocking and have several rigs that have performed beyond my expectations every time. And I figured it's just about time for a new rig.

Overclocking a 950 using a P6X58D-E: for some reason I am unable to get a CPU Voltage under 1.25000. When I type another value in or use the -/+ keys the lowest it's allowing me to go is 1.25 and when I press the - key after that value it jumps to auto. I have only worked on this setup a few hours after work days and may have been ignorant of an obvious reason ... All advice is much appreciated.
post #4666 of 6378
Quote:
Originally Posted by ArcFlash View Post
Good evening everyone. Hope all is well.

I apologize if this issue has been brought up but I really don't have the time to go through 400 pages and would appreciate your insight.

Though a new member I'm not new to overclocking and have several rigs that have performed beyond my expectations every time. And I figured it's just about time for a new rig.

Overclocking a 950 using a P6X58D-E: for some reason I am unable to get a CPU Voltage under 1.25000. When I type another value in or use the -/+ keys the lowest it's allowing me to go is 1.25 and when I press the - key after that value it jumps to auto. I have only worked on this setup a few hours after work days and may have been ignorant of an obvious reason ... All advice is much appreciated.
weird, sorry never had that problem so I'm not much help.

I'd double check these two settings and possibly update BIOS other then that I'm just not sure. Hope you get it sorted.

Ai Overclock Tuner.....................[Manual]

CPU Voltage Control....................[Manual]
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
post #4667 of 6378
Quote:
Originally Posted by ~sizzzle~ View Post
weird, sorry never had that problem so I'm not much help.

I'd double check these two settings and possibly update BIOS other then that I'm just not sure. Hope you get it sorted.

Ai Overclock Tuner.....................[Manual]

CPU Voltage Control....................[Manual]
Thanks for the reply, I'm not a novice when it comes to searching for information online and I'm surprised to say that I've found 0 information about this particular problem - it's proving even harder than those cool vids of the ladies and the horsies that I find so satisfactory (just kiddings)! But serious, I've most certainly set both of the above mentioned settings to Manual. I guess I have to flash the bios as suggested and do suspect that's where the problem would be. I don't want to think about other weired possibilities i.e. how the cpu ref voltage is established by the MB and if there's a chance the means of retrieving that information is damaged, etc. Will post the progress and monitor this thread as I proceed.
post #4668 of 6378
Let us know how it goes. Wish I could be of more help.

Just so that you do know that it should be possible, I have set voltage below my stock vcore many times on this board....
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
Monster IIr
(20 items)
 
Tinker
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Z77 Extreme6 MSI R7970 G.SKILL Ripjaws X 
Hard DriveHard DriveHard DriveHard Drive
WD Black 640GB Crucial M4 SSD Corsair 840 SSD Seagate  
Optical DriveCoolingOSMonitor
Samsung Cogage Arrow Windows 7 Alienware AW2310 
MonitorKeyboardPowerCase
Dell ST2410 BlackWidow Ultimate Corsair 850TX CM Sniper 
MouseMouse PadAudioAudio
Corsair M60 FUNC X-Fi Titanium HD  Sennheiser PC360 
CPUMotherboardGraphicsRAM
i5 760 EVGA P55 FTW XFX 5850 Mushkin Blackline 4GB 
Hard DriveOptical DriveCoolingOS
Caviar Blue 640 Asus Corsair A70 Windows 7 
MonitorKeyboardPowerCase
Dell ST2410 Rosewill RK-800G Seasonic M12II 620 NZXT Gamma 
MouseMouse PadAudioAudio
Logitech G500 Func Archetype 1030 ASUS XONAR_DG JVC HA-RX700 
  hide details  
Reply
post #4669 of 6378
Quote:
Originally Posted by ~sizzzle~ View Post
Let us know how it goes. Wish I could be of more help.

Just so that you do know that it should be possible, I have set voltage below my stock vcore many times on this board....
I definitely looked for videos showing "how to overclock" and saw that it was possible, not to mention the specifications state that the minimum is 0.8x V.

I'll check back in when I got it working.

Just FYI, I did clock it to 3.8GHz at 1.25V with reasonable temps. Max was 86 after a few hours of p95 with average around 80. I've seen a lot of people recommending not to go over 70 but I find that kind of ridic. Anyone who would be loading a CPU anywhere close to 100% will be using a 3000 dollar rig for whatever professional application they're working at. In reality the load would never be close to that specially for a prolonged period of time. In addition, being an EE, albeit not specializing in microelectronics, I would think the manufacturer recommendation (Intel) likely have a safety margin considered - I know manufacturers of high voltage, etc. equipment surely do. Plus with thermal throttling it's highly unlikely to cause damage to the CPU unless you're just going nuts on it.

But anyway, I can surely hit 4g when I get this figured out - not that it's even gonno give me that much improvement in performance, but hey I have a heart too, I wanna toss my name on the 4g club and ride with the cool kids in the back of the bus
Edited by ArcFlash - 3/8/11 at 9:34pm
post #4670 of 6378
Just flashed the Bios to the most recent revision per ASUS support site - no results .

I guess I'll try to call the asus support tomorrow to see whatsup. Sure does feel lonely not finding others with this problem, though I wish everyone well and the utmost LACK of problems! I guess I should be all frustrated and s*** right about now - does it make me weired that I kind of don't mind and will keep trying till I gets it right?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--