Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--
New Posts  All Forums:Forum Nav:

[Official] --The Asus P6X58D Premium & E Thread-- - Page 92

post #911 of 6378
Quote:
Originally Posted by Scrimstar View Post
Hey you guys think a Megahalem would these RAM sticks on this mobo? lol

http://www.newegg.com/Product/Produc...82E16820231335

.. or maybe I should get a differnt cooler? I heard megahalems were good though.
Yeah, the Megahalems is an excellent cooler. I think you might be okay, if you're only doing 3 sticks. If you end up filling up all 6 banks though, the bank closest to your heatsink may not allow the ram stick to fit, considering the height of the heatspreader on that ram. So, yeah it should fit, but might not be beneficial if you decided to add additional ram later on down the road. You would have to A) replace all your ram or B) replace your heatsink. That's the downfall to having large air coolers and/or large heat spreaders on the ram.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #912 of 6378
I think I won't be using anymore than 6GB, so that sounds good to me.
i7
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 930@3.72GHz (x22.0; 1.152V) Gigabyte UD3R ASUS 1070 ROG OC OCZ Gold XTC 1333MHz 12GB 
OSMonitorKeyboardPower
W10 Pro 64 bit LG Electronics Gaming 24GM77 144hz 1ms CM NovaTouch, K95 Brown RGB Antec TruePower Quattro 1k 
CaseMouseMouse PadAudio
Antec 900 Naos 7000 / EC2-A / ZA12 / KPM GSR / Fnatic QCK / MM200 XL / Taito / Razer Spe... Sennheiser Game One 
  hide details  
Reply
i7
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 930@3.72GHz (x22.0; 1.152V) Gigabyte UD3R ASUS 1070 ROG OC OCZ Gold XTC 1333MHz 12GB 
OSMonitorKeyboardPower
W10 Pro 64 bit LG Electronics Gaming 24GM77 144hz 1ms CM NovaTouch, K95 Brown RGB Antec TruePower Quattro 1k 
CaseMouseMouse PadAudio
Antec 900 Naos 7000 / EC2-A / ZA12 / KPM GSR / Fnatic QCK / MM200 XL / Taito / Razer Spe... Sennheiser Game One 
  hide details  
Reply
post #913 of 6378
Quote:
Originally Posted by Scrimstar View Post
I think I won't be using anymore than 6GB, so that sounds good to me.
Yep. You should be fine then. For reference, here's a picture of one of the P6X58D members here, running a Megahalems, with 2 fans on either side (push/pull) with 3 sticks of Kingston HyperX ram which has tall heat spreaders.

EDIT: In this picture, you can see how it should fit fine, but, also that the last memory bank is really close to the fan and might give you trouble should you decide to fill up all 6 banks.
Edited by xmisery - 3/3/10 at 8:15pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #914 of 6378
Quote:
Originally Posted by Scrimstar View Post
Hey you guys think a Megahalem would these RAM sticks on this mobo? lol

http://www.newegg.com/Product/Produc...82E16820231335

.. or maybe I should get a differnt cooler? I heard megahalems were good though.
If you get the Megahalems, you might have to rebend the clip on the side near the memory module, or add a small cable tie to the fan shroud hole at the bottom and attach the lower part of the clip to it. This applies only if you fill up all 6 slots.
Edited by Myrlin - 3/3/10 at 8:43pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 @ 4.0GHz 1.25v Asus P6X58D Premium XFX 5870 Corsair TR3X6G1600C8D 6GB 
Hard DriveOptical DriveOSMonitor
O/S-Intel X25-M 80GB/ Storage-Samsung F3 500GB LITE-ON iHAS424-98 Windows 7 Professional 64 Acer X223W 
PowerCaseMouse
Corsair HX850 HAF 932 MX518 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 @ 4.0GHz 1.25v Asus P6X58D Premium XFX 5870 Corsair TR3X6G1600C8D 6GB 
Hard DriveOptical DriveOSMonitor
O/S-Intel X25-M 80GB/ Storage-Samsung F3 500GB LITE-ON iHAS424-98 Windows 7 Professional 64 Acer X223W 
PowerCaseMouse
Corsair HX850 HAF 932 MX518 
  hide details  
Reply
post #915 of 6378
Okay, I've done some more testing with this motherboard. For those who want to run their i7 920 D0's @ 4.41GHz at the lowest stable voltages, here are my BIOS settings.

NOTE: These settings were stable for me and should be for you as well. However, not all i7's are created equal, so YMMV. That said, these settings were tested against LinX - / Problem size: 25854 / Memory to use: 5120 / Times to run: 20. If you guys see some additional tweaks or changes to make this even better, please share. I should also warn, that running this OC will likely require a high-end air cooler or water cooling solution, as the temps tend to start getting on the high end.

==================================================
Users running Intel i7 920 Chips - (Settings Below)
==================================================


****************************************
Running 4.41GHz w/o HyperThreading (Stable)
****************************************

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[210]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1683MHz]
UCLK Frequency.........................[3368MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.39375]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.25000]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Disabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
****************************************
Running 4.41GHz w/ HyperThreading (Stable)
****************************************
- Special Thanks to gergregg for this information.

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[210]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1683MHz]
UCLK Frequency.........................[3789MHz]
QPI Link Data Rate.....................[7579]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.425]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.400]
IOH Voltage............................[1.10]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.10]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.52]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[Auto]
CPU Clock Skew.........................[Auto]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Disabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]


==================================================
Users running Intel i7 930 Chips - (Settings Below)
==================================================


****************************************
Running 4.41GHz w/o HyperThreading (Stable)
****************************************
- Special Thanks to WhiteDog for this information.

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[210]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1683MHz]
UCLK Frequency.........................[3368MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.39375]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.25000]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Disabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
NOTE: If these settings aren't stable for you, they should at least get you a good baseline to go by. You may need to slightly increase your "CPU Voltage" and/or "QPI/DRAM Core Voltage" one bump at a time from this point to get something stable for your specific chip.
Edited by xmisery - 10/3/10 at 6:19am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #916 of 6378
4.41....very impressive....very litle qpi....lots of vcore. Dare I ask what the core temps are at that voltage?

You need to change your Bclk in your code to 210. Were you able to hold 7-8-7 or did you bump back up to 8-8-8?

I'm doing some low voltage testing right now on my memory and so far I've been able to drop my DRAM voltage down to 1.5v and still pass hyperpi32M 8 threads. The lower DRAM voltage also allowed me to lower my QPI to 1.2375, but still need to run Linx to see if it passes.

Man, I need to get a watercooling setup!
post #917 of 6378
Quote:
Originally Posted by BlackDragon24 View Post
4.41....very impressive....very litle qpi....lots of vcore. Dare I ask what the core temps are at that voltage?

You need to change your Bclk in your code to 210. Were you able to hold 7-8-7 or did you bump back up to 8-8-8?

I'm doing some low voltage testing right now on my memory and so far I've been able to drop my DRAM voltage down to 1.5v and still pass hyperpi32M 8 threads. The lower DRAM voltage also allowed me to lower my QPI to 1.2375, but still need to run Linx to see if it passes.

Man, I need to get a watercooling setup!
Yeah, the temps were pushing 83c on the hottest core. Anything above 85-90c and I start getting a little uncomfortable. Thanks for pointing out the 210 typo, all fixed now!

I kept the 7-8-7-20 timings btw. And yeah, I'm really getting the itch to go to a full water cooling setup! hehe
Edited by xmisery - 3/3/10 at 9:57pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #918 of 6378
Quote:
Originally Posted by quentin View Post
Has anyone gotten 4.4 with ht on? Care to post settings?
Hehe, I wish I could. But, the last test I did was w/ HT off and the temps were already pretty hot. I wouldn't feel comfortable pushing 4.4 w/ HT without a full water cooling loop.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
post #919 of 6378
Thread Starter 
Quote:
Originally Posted by Scrimstar View Post
Hey you guys think a Megahalem would these RAM sticks on this mobo? lol

http://www.newegg.com/Product/Produc...82E16820231335

.. or maybe I should get a differnt cooler? I heard megahalems were good though.
save yourself the headache of gambling if you need more than 6gb in the future and get a corsair hydro H50, it cools just as good as thse high profile air coolers but it takes up less than half of the space, there are tons of pictures on page 1.
RYZEN
(13 items)
 
x58
(14 items)
 
Mac Pro 4.1
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 1700x Gaming 3 Micro AM4 ASUS Strix GTX 1070 G.SKILL 3200mhz  
Hard DriveCoolingOSMonitor
Crucial m4  Noctua D14 Windows 10  Dell p2715Q 4k 
KeyboardPowerCaseMouse
logitech solar wireless  Seasonic PRIME 750  TT V21 Core  logitech g9 
Audio
Audioengine A2+ 
CPUMotherboardGraphicsRAM
Intel Xeon x5675 4.4ghz @1.3v gigabyte X58A-UD7 rev1 EVGA GTX 1080 Crucial Ballistix 2x8gb 1600mhz 1.35v CL7 
Hard DriveCoolingOSMonitor
480gb m.2 Kingston Hyperx Predator  Cryorig R1 Universal window 10 Home x64  Dell P2715Q 
KeyboardPowerCaseMouse
Corsair K70 MX Blue Seasonic Prime 750watt Corsair Obisidian 800D logitech G9 
Mouse Pad
corsair 
CPUCPUGraphicsRAM
xeon 5500 xeon 5500 gtx 260 samsung ecc 
OSMonitorKeyboardMouse
Yosemite  dell 27 4k IPS 60hz logitech wireless solar keyboard logitech g500 
  hide details  
Reply
RYZEN
(13 items)
 
x58
(14 items)
 
Mac Pro 4.1
(8 items)
 
CPUMotherboardGraphicsRAM
Ryzen 1700x Gaming 3 Micro AM4 ASUS Strix GTX 1070 G.SKILL 3200mhz  
Hard DriveCoolingOSMonitor
Crucial m4  Noctua D14 Windows 10  Dell p2715Q 4k 
KeyboardPowerCaseMouse
logitech solar wireless  Seasonic PRIME 750  TT V21 Core  logitech g9 
Audio
Audioengine A2+ 
CPUMotherboardGraphicsRAM
Intel Xeon x5675 4.4ghz @1.3v gigabyte X58A-UD7 rev1 EVGA GTX 1080 Crucial Ballistix 2x8gb 1600mhz 1.35v CL7 
Hard DriveCoolingOSMonitor
480gb m.2 Kingston Hyperx Predator  Cryorig R1 Universal window 10 Home x64  Dell P2715Q 
KeyboardPowerCaseMouse
Corsair K70 MX Blue Seasonic Prime 750watt Corsair Obisidian 800D logitech G9 
Mouse Pad
corsair 
CPUCPUGraphicsRAM
xeon 5500 xeon 5500 gtx 260 samsung ecc 
OSMonitorKeyboardMouse
Yosemite  dell 27 4k IPS 60hz logitech wireless solar keyboard logitech g500 
  hide details  
Reply
post #920 of 6378
Quote:
Originally Posted by kckyle View Post
save yourself the headache of gambling if you need more than 6gb in the future and get a corsair hydro H50, it cools just as good as thse high profile air coolers but it takes up less than half of the space, there are tons of pictures on page 1.
^^-- Or that. I mean, I have an H50 and love it. It works awesome and takes up very little space and allows me to run memory in all 6 banks + a 2-fan memory cooler on top with plenty of room to still spare. Definitely another great option.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 920 D0 w/ HT On [4.2ghz @ 1.28v] Asus P6X58D Premium [0904] [CrossFireX] - XFX HD5770 2GB [1010/1410 @ 1.237v] Corsair Dominator 12GB DDR3 [1600Mhz / 7-8-7-20] 
Hard DriveOptical DriveOSMonitor
Intel X25-M 80GB + Samsung F3 4x2TB [RAID-5] Plextor Blu-Ray [PX-B320SA] Windows 7 Professional [64-Bit] Dell 24" LCD [1080p] 
PowerCase
Corsair HX-Series [850w] Lian Li Lancool PC-K62 [DragonLord] 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] --The Asus P6X58D Premium & E Thread--