Overclock.net › Forums › Intel › Intel Motherboards › Official EVGA X58 SLI/LE/Micro MB Owners Club
New Posts  All Forums:Forum Nav:

Official EVGA X58 SLI/LE/Micro MB Owners Club - Page 110

post #1091 of 2630
Ok so i didn't provide a diagram





.

Gear mentioned in this thread:

post #1092 of 2630
** Updates **

The spreadsheet now contains bios settings of the users again.
if i forgot someones settings, pm me with a link to the post, and it will be added ASAP

please keep in mind, these settings are only added if complete bios details, not only with cpu-z screens

** Update completed **

Andy.Yung was begging for it, as he recently messed up his oc and needed some guidance, so props for this feature go to him!
Edited by hitman1985 - 4/8/10 at 6:33pm
post #1093 of 2630
Quote:
Originally Posted by Andy.Yung View Post
Thanks for the diagram killer!

Just for the hell of it, I took my multimeter to those points.

These are my BIOS settings:
EVGA VDroop Control = Without VDroop
CPU VCore = 1.1875
CPU VTT Voltage = +100
CPU PLL VCore = Auto
DIMM Voltage = 1.65
DIMM DQ Vref = +0mV
QPI PLL VCore = 1.35
IOH VCore = 1.2
IOH/ICH I/O Voltage = Auto
ICH VCore = 1.2

Actual motherboard readings:


Hopefully no one gives me **** on the condition of my Fluke. It's been through hell and back the past 7 years yet it still works!
Good work Andy! Just curious, what does Evga eleet/cpuz say your vcore is?

+rep
Edited by tdesbien31 - 4/9/10 at 1:26pm
Aligator
(12 items)
 
  
CPUMotherboardGraphicsRAM
I7 2600k Asus Maximus IV Gene EVGA 780 TI SC G.Skill Trident X 2400mhz 
Hard DriveOSMonitorPower
Samsung Evo 256gb Windows 8.1 Pro 64bit Samsung S27D590P Thermaltake Toughpower TPD-0750M 
CaseMouseMouse PadAudio
NZXT H440 Logitech G700s Razer Klipsch Promedia 2.1 
  hide details  
Reply
Aligator
(12 items)
 
  
CPUMotherboardGraphicsRAM
I7 2600k Asus Maximus IV Gene EVGA 780 TI SC G.Skill Trident X 2400mhz 
Hard DriveOSMonitorPower
Samsung Evo 256gb Windows 8.1 Pro 64bit Samsung S27D590P Thermaltake Toughpower TPD-0750M 
CaseMouseMouse PadAudio
NZXT H440 Logitech G700s Razer Klipsch Promedia 2.1 
  hide details  
Reply
post #1094 of 2630
Quote:
Originally Posted by tdesbien31 View Post
Good work Andy! Just curious, what does Evga eleet/cpuz say your vcore is?

+rep
remove the images out of the quotes mate, that thing takes up half of a page

ty in advance!
post #1095 of 2630
Oops, I forgot to mention that. That was the whole reason for this anyway! LOL

CPU-Z shows my VCore at 1.223 or 1.235. It fluctuates a little bit, but only between those 2 values.

I should also say that those pictures and all of these values were measured under 100% CPU load.
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
post #1096 of 2630
Quote:
Originally Posted by hitman1985 View Post
Andy.Yung was begging for it, as he recently messed up his oc and needed some guidance, so props for this feature go to him!
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
post #1097 of 2630
Heres my 4.1GHz template if anyone is interested.

Frequency Control
CPU Clock Ratio (20x)
CPU Host Frequency (Mhz) (196)
MCH Strap (auto)
CPU Uncore Frequency (Mhz) (16x)
CPU Clock Skew (Disabled)
Spread Spectrum (Disabled)
PCIE Frequency (Mhz) (100)

Memory Feature
Memory Speed (Standard)
Memory Control Setting (Enabled)
Memory Frequency (2:8)
Channel Interleave Setting (6 way)
Rank Interleave Setting (4 way)
Memory Low Gap (auto)
tCL Setting (8)
tRCD Setting (8)
tRP Setting (8)
tRAS Setting (24)
tRFC Setting (88)
Command Rate (1T)

Voltage Control
EVGA VDroop Control (Without Vdroop)
CPU VCore (1.3)
CPU VTT Voltage (+100)
CPU PLL VCore (1.425)
DIMM Voltage (1.65)
DIMM DQ Vref (+0mV)
QPI PLL VCore (1.2)
IOH VCore (1.2)
IOH/ICH I/O Voltage (auto)
ICH VCore (1.2)

CPU Feature
Intel SpeedStep (Disabled)
Turbo Mode Function (Enabled)
CxE Function (Disabled)
Execute Disable Bit (Disabled)
Virtualization Technology (Disabled)
Intel HT Technology (Enabled)
Active Processor Cores (All )
QPI Control Settings (Enabled)
QPI Link Fast Mode (Enabled)
QPI Frequency Selection (4.8 GT/s)
OC Recovery (Enabled)
Turbo Performance (Disabled)

PnP/PCI PCI Express
Maximum Payload Size (4096)

Power Management Setup
ACPI Suspend Type (S1)
HPET Support (Enabled)
HPET Mode (64-bit)
post #1098 of 2630
Quote:
Originally Posted by Andy.Yung View Post
Any other nice parts coming via UPS tomorrow besides the Noiseblocker 140mm?
I got two AP-15's also, along with a Lian Li 5.25" HD mount in addition to the 140mm NB'er.

Just finished up putting in the HD mount and removing the HD trays from the bottom of the case. Also, put the AP-15's on the Ven-X, moved one S-Flex to the rear exhaust, and put the other in the HD mount.

Old Temps from yesterday
Ambient: 23C
System: 35C
Load Cores: 77-75-74-74 (P95)

And the results are in.../drumroll
New Temps from today
Ambient: 20C
System: 25C
Load Cores: 65-66-63-63 (P95)

Wow, I wasn't even expected this much of a difference

Overall the case is somewhat louder. Most of the noise I do believe is coming from the S-Flex in the HD mount (might be from the the air filter or the lack of rubber mounts). The case did lose a little rigidity after I removed the stock HD tray, but only with the side panels off.
Ace
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K ASUS P8Z77-V PRO ASUS 6950 2GB 16 GB Samsung MV-3V4G3 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128GB WD Caviar Black 640GB Samsung Blu-Ray Drive Thermalright Venomous-X 
CoolingCoolingOSMonitor
GT AP-15 Push/Pull + Case Intake Scythe S-Flex Case Exhaust Win7 x64 Enterprise Acer 24" P243W 
KeyboardPowerCaseMouse
WASD Semi-Custom Cherry MX Browns Corsair HX750W Lian Li PC-7FN Logitech G9x 
Mouse PadAudioAudio
none Asus Xonar Essence STX Beyerdynamic DT990 Premium 
  hide details  
Reply
Ace
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K ASUS P8Z77-V PRO ASUS 6950 2GB 16 GB Samsung MV-3V4G3 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128GB WD Caviar Black 640GB Samsung Blu-Ray Drive Thermalright Venomous-X 
CoolingCoolingOSMonitor
GT AP-15 Push/Pull + Case Intake Scythe S-Flex Case Exhaust Win7 x64 Enterprise Acer 24" P243W 
KeyboardPowerCaseMouse
WASD Semi-Custom Cherry MX Browns Corsair HX750W Lian Li PC-7FN Logitech G9x 
Mouse PadAudioAudio
none Asus Xonar Essence STX Beyerdynamic DT990 Premium 
  hide details  
Reply
post #1099 of 2630
Quote:
Originally Posted by triallen View Post
I got two AP-15's also, along with a Lian Li 5.25" HD mount in addition to the 140mm NB'er.

Just finished up putting in the HD mount and removing the HD trays from the bottom of the case. Also, put the AP-15's on the Ven-X, moved one S-Flex to the rear exhaust, and put the other in the HD mount.

Old Temps from yesterday
Ambient: 23C
System: 35C
Load Cores: 77-75-74-74 (P95)


And the results are in.../drumroll
New Temps from today
Ambient: 20C
System: 25C
Load Cores: 65-66-63-63 (P95)


Wow, I wasn't even expected this much of a difference

Overall the case is somewhat louder. Most of the noise I do believe is coming from the S-Flex in the HD mount (might be from the the air filter or the lack of rubber mounts). The case did lose a little rigidity after I removed the stock HD tray, but only with the side panels off.
Very Nice temperature drop
post #1100 of 2630
Those temps look good triallen! They are pretty close what mine are. (Mine are a touch higher, and I'd probably attribute it to a little higher ambient temp)

How did you mount your Typhoons to the Ven-X? Zip-ties?
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel Motherboards › Official EVGA X58 SLI/LE/Micro MB Owners Club