Good morning all
And hold on here
as far as 50+ runs of linx
or 12-24 hours of prime
Hmmm... NO Thank You Sir
5 runs at max memory and 25000 problem size is good enough for me
when after that i can fold a3 core WU's@ 95% cpu for days straight and install 6+gig games and scan things with avg at the same time. "FOR REAL WORLD USE"
or encode 4-5 HD-source movies at once and surfing around OCN
And most "if none at all" aren't running servers or E-commerce type businesses or on a workstation working with autocad and such with high dollar contracts.
If i am going to stress my gear that hard and for that long its going to pay cash or help cure cancer.
This is just my humble opinion.
LinX 5 pass "MAX" then folding is my stress test
If my GFLOPS are dropping substantially within the 1st 3-4 passes in sequential order that can seem to lead to a need in a increase of vcore. It seems from reading up on that and testing it seems to hold true.
When it comes to 24/7 settings can some very experienced
users with i7's give me some input on if these setting are good for 24/7 use LONG TERM?
VTT is now set to +0mV 1.2v stock for Classified (Idling@1.25v) (Load 1.28v~1.30v) " I know intel's rated max for CPU VTT is 1.35v" and that it needs to be within .5 of the Dimm. I run 1.65 for my Dominators@842Mhz
If anyone is wondering why i'm using a 19x multi it is because the lower the multi the lower my vcore and VTT can be set with stability being temps are an issue with my high ambients of 75f-80f
Even with LinX why on earth are my temps so close to the 80c range with 1.26v vcore and a 1.26v on vtt on load with at least a H50?
BodyEdited by Bodycount - 4/27/10 at 8:53pm