Overclock.net › Forums › Intel › Intel Motherboards › Official EVGA X58 SLI/LE/Micro MB Owners Club
New Posts  All Forums:Forum Nav:

Official EVGA X58 SLI/LE/Micro MB Owners Club - Page 232

post #2311 of 2630
Quote:
Originally Posted by AdvanSuper View Post
Yeah that's just about right. However it is odd that it's gone from their store. Even if it was out of stock it would still be listed.
Perhaps the SLI3 and Classified3 are finally being released?

     
CPUMotherboardGraphicsRAM
i5 3570k Asus Maximus Gene V Asus GTX970 Strix 16GB Samsung 1867 MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256GB Corsair H60 Windows 7 X64 Dell U2412M 1920x1200 
KeyboardPowerCaseMouse
Ducky Mini LE YOTH Seasonic 660XP2 Silverstone TJ08-EW Mionix Naos 8200 
CPUGraphicsRAMHard Drive
i7 3615QM GT 650M 2GB 12GB Elpida DDR3 Plextor M5 Pro 256GB 
Hard DriveOSMonitorKeyboard
Plextor M3 256GB Windows 7 Professional x64 17.3" 1920x1080 KBC Poker w/ MX Clears, 62g Springs, & SS Plate 
MouseMouse Pad
Mionix Naos 8200 Mionix Sargas 320 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i5 3570k Asus Maximus Gene V Asus GTX970 Strix 16GB Samsung 1867 MV-3V4G3D 
Hard DriveCoolingOSMonitor
Samsung 830 256GB Corsair H60 Windows 7 X64 Dell U2412M 1920x1200 
KeyboardPowerCaseMouse
Ducky Mini LE YOTH Seasonic 660XP2 Silverstone TJ08-EW Mionix Naos 8200 
CPUGraphicsRAMHard Drive
i7 3615QM GT 650M 2GB 12GB Elpida DDR3 Plextor M5 Pro 256GB 
Hard DriveOSMonitorKeyboard
Plextor M3 256GB Windows 7 Professional x64 17.3" 1920x1080 KBC Poker w/ MX Clears, 62g Springs, & SS Plate 
MouseMouse Pad
Mionix Naos 8200 Mionix Sargas 320 
  hide details  
Reply

Gear mentioned in this thread:

post #2312 of 2630
Could somebody who has their system stable at DDR-1600 post their settings? I can't get mine stable, and want to use somebody else's settings as a reference.
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
post #2313 of 2630
Quote:
Originally Posted by gonX View Post
Could somebody who has their system stable at DDR-1600 post their settings? I can't get mine stable, and want to use somebody else's settings as a reference.
Do you have your bios template handy? If not just copy&paste one in here and fill in the blanks. This wil help to not have random crap thrown your way
http://www.evga.com/FORUMS/tm.aspx?m=245709

Are you trying to overclock the cpu aswell or just the memory?
Edited by Bodycount - 8/21/10 at 12:50pm
post #2314 of 2630
Currently, I'm trying with a different divider, so my settings are entirely different. I think this is better since OCZ is known to make rather bad RAM, but I found out that these sticks don't like high voltage very much - in fact, they get unstable if I put too much voltage in them.
I have trouble getting my CPU stable at 4 GHz, as I get error code 124 no matter what I do, even with +500mV VTT. I also tried increasing my VCore all the way up to 1.5v without luck. I tried QPI PLL to 1.4v, without luck. I tried changing CPU PLL to every setting between 1.65v and 1.89v.
My computer doesn't POST on anything below +225mV VTT if I use the lowest divider for some odd reason. My RAM is too unstable to use anything else than the lowest divider.

So primarily I want the CPU overclocked... and I have the cooling for it, but I still hit 85c easy during Linpack on 1.43VCore. I can't afford a new kit of RAM at the moment, so this will have to hold me over for the next few months.
I think I need to lap my CPU, which I might do this some time in the future.

I kind of want ALL RAM settings... even the subtimings. I think those are what makes my RAM so unstable.
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
post #2315 of 2630
If you go through the member list on the first post, I have BIOS settings that I posted that were used on my first builds using the OCZ Gold memory. Those systems run at 4.0Ghz stable, but I don't have subtimings for them. The only difference is that all my chips are D0 stepping.
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
post #2316 of 2630
Quote:
Originally Posted by gonX View Post
Currently, I'm trying with a different divider, so my settings are entirely different. I think this is better since OCZ is known to make rather bad RAM, but I found out that these sticks don't like high voltage very much - in fact, they get unstable if I put too much voltage in them.
I have trouble getting my CPU stable at 4 GHz, as I get error code 124 no matter what I do, even with +500mV VTT. I also tried increasing my VCore all the way up to 1.5v without luck. I tried QPI PLL to 1.4v, without luck. I tried changing CPU PLL to every setting between 1.65v and 1.89v.
My computer doesn't POST on anything below +225mV VTT if I use the lowest divider for some odd reason. My RAM is too unstable to use anything else than the lowest divider.

So primarily I want the CPU overclocked... and I have the cooling for it, but I still hit 85c easy during Linpack on 1.43VCore. I can't afford a new kit of RAM at the moment, so this will have to hold me over for the next few months.
I think I need to lap my CPU, which I might do this some time in the future.

I kind of want ALL RAM settings... even the subtimings. I think those are what makes my RAM so unstable.
Wow man your pushing some of those limits. This is a tough one and 500mV? Personally i have not used OCZ products But with the info and voltages you provided have you tried to loosen the memory timings a bit say 9-9-9-24?

This might also help in lowering some voltage's as there IS such a thing as to much voltage to certain components hindering them so to speak.
Did you read the Evga voltage guide link i posted in the OP and a few post up? There are also these that you might want to take a look at in regards to your memory issue

Memory Frequency Guide
http://www.evga.com/forums/tm.aspx?m=5247

Voltage Guide
http://www.evga.com/forumsarchive/tm...09&mpage=1&key
Edited by Bodycount - 8/21/10 at 2:04pm
post #2317 of 2630
Yeah I both tried lowering and raising them. I really don't want to go above +400mV on VTT. As I said +225mV doesn't POST with the low divider, and even then I pretty much insta-BSODs with error 124 - I keep doing this up to around +350mV, where it stops BSODing instantly, but does it after a minute or so anyway. I don't know what to do to fix error 124. I've read both guides countless times and tried a lot of different voltage settings. My RAM just won't be stable at anything other than 1066.
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
post #2318 of 2630
Can someone please tell me what their VRM temps are? Mine max out at 70*C at load with my sig rig overclock. I have a antec spot cool blowing on the heatsink. Is it normal to run 70? Or should I get them lower?
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #2319 of 2630
As long as they don't go above 80c I wouldn't worry. The general consensus seems to be that 85c is the dangerous zone. Mine don't seem to get above 65c though, and that's without anything over them. 25c ambients
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
#well
(19 items)
 
Lenovo L530
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770k Gigabyte Z87X-UD4H XFX Radeon HD 6950 Corsair CMX8GX3M2A2000C9 
Hard DriveHard DriveOptical DriveCooling
Samsung EVO 840 Hitachi HDS722020ALA330 Generic DVD±RW Burner Noctua NH-D14 
OSMonitorMonitorKeyboard
Windows 8.1 Dell U2711 LG W2453 Ducky DK9008 Overclock.net Edition, Cherry MX B... 
PowerCaseMouseMouse Pad
Corsair TX850 Antec Three Hundred Corsair Raptor M40 QPAD HeatoN M 
AudioAudioAudio
E-MU Tracker|pre Beyerdynamic DT-770 250 Ohm AntLion ModMIc 
CPUGraphicsRAMRAM
Intel Ivy Bridge 3210M Intel HD 4000 Graphics Soldered Corsair Vengeance  
Hard DriveOptical DriveOSMonitor
500GB DVD-+RW Windows 7 Professional 1600x900 
  hide details  
Reply
post #2320 of 2630
Quote:
Originally Posted by gonX View Post
As long as they don't go above 80c I wouldn't worry. The general consensus seems to be that 85c is the dangerous zone. Mine don't seem to get above 65c though, and that's without anything over them. 25c ambients
Yours don't go above 65c when the system isn't under 100% load right? I can't imagine your VRM temp to be at 65C under load. I let Prime run for a few hours on one of my systems and saw VRM temps go from 65c (idle) to 80c (load for 3+ hours)
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
i7.5
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz @ 1.20v EVGA x58 757 LE XFX Radeon HD 5770 Mushkin Blackline-1600 12GB 
Hard DriveOSMonitorPower
Intel X25-M G2 80GB SSD & Samsung F3 1TB Windows 7 Ultimate 64bit ASUS VW266H 25.5" Antec TruePower New TP-750 
Case
Antec 300 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel Motherboards › Official EVGA X58 SLI/LE/Micro MB Owners Club