Overclock.net › Forums › Intel › Intel CPUs › Need help getting to 4.0 GHz
New Posts  All Forums:Forum Nav:

Need help getting to 4.0 GHz - Page 3

post #21 of 44
Well those are awesome temps, mine must be my motherboard jsut reading different, it was a huge deal on the abit forums a while back ebcause everyone thought there CPUs were running too hot lol. im on a big typhoon as well and my temps dropped 13 at load and 12 or so at idle so i know its set good and whatnot. For everyone that wants to get the typhoon, yes it will fit on 939 sockets, and you do have to take out the motherboard but it really isnt that hard, getting the tensions right on all the screws is tricky and i would say just make sure you dont tighten them so tight because on my MB the edge started to bend when the spounge was being sucked to the back of the board too hard. once installed is very quiet and looks awesome
Rig Specs
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X3 445 Rana ASUS M4A77T/USB3 eVGA GTX 750 Ti G.SKILL Ripjaws 4GB DDR3 1600 
Hard DriveOSMonitorKeyboard
OCZ Agility 2 120gb + WD 80gb HDD Windows 7 Pro 64-bit Samsung SyncMaster P2450 Logitech Internet Pro 
PowerCaseMouseMouse Pad
OCZ GameXStream 600w Thermaltake Soprano Logitech mx518 Steelpad QCK 
  hide details  
Reply
Rig Specs
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X3 445 Rana ASUS M4A77T/USB3 eVGA GTX 750 Ti G.SKILL Ripjaws 4GB DDR3 1600 
Hard DriveOSMonitorKeyboard
OCZ Agility 2 120gb + WD 80gb HDD Windows 7 Pro 64-bit Samsung SyncMaster P2450 Logitech Internet Pro 
PowerCaseMouseMouse Pad
OCZ GameXStream 600w Thermaltake Soprano Logitech mx518 Steelpad QCK 
  hide details  
Reply
post #22 of 44
Quote:
Originally Posted by supratt93
honestly, i dont think you can hit 4.0 i have the same cpu, motherboard as you and i cant hit it. everything is different though, so you have a fighting chance.

i really dont want to format windows since i have the computer up for sale on ebay(hoping to sell for 700 so i can buy a 775 setup with dual core)
Well if your going to sell it - I would definately format the drive. If your going to leave windows on there it'll be registered to yourself.

Also, if prime wont even run then your not stable.
Black Out
(15 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE C3 MSI NF980-G65 EVGA GTS 250 1 GB OCZ Black Edition 4GB DDR3 
Hard DriveOptical DriveCoolingOS
RAID 0 Caviar Blue 500GB Samsung DVD+-RW Custom Water Cooling, 2+1.120 Rad Windows 7 Pro 32-bit 
MonitorKeyboardPowerCase
Samsung 23" BX2331 2ms Logitech Wireless OCZ ModXstream 700W Lian-Li PC-V1000B Plus 
MouseAudio
Logitech G9x Realtek Onboard 
  hide details  
Reply
Black Out
(15 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 955 BE C3 MSI NF980-G65 EVGA GTS 250 1 GB OCZ Black Edition 4GB DDR3 
Hard DriveOptical DriveCoolingOS
RAID 0 Caviar Blue 500GB Samsung DVD+-RW Custom Water Cooling, 2+1.120 Rad Windows 7 Pro 32-bit 
MonitorKeyboardPowerCase
Samsung 23" BX2331 2ms Logitech Wireless OCZ ModXstream 700W Lian-Li PC-V1000B Plus 
MouseAudio
Logitech G9x Realtek Onboard 
  hide details  
Reply
post #23 of 44
Thread Starter 
Quote:
Originally Posted by timsvpr
Well if your going to sell it - I would definately format the drive. If your going to leave windows on there it'll be registered to yourself.

Also, if prime wont even run then your not stable.

wont run at stock speeds either. i suppose youre going to tell me that its not stable at stock speeds? im positive the files i deleted caused the error. ill just format one drive.
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Pentium D pressler 920 asus p5ld2 win XP nec 17in. lcd 
KeyboardPowerCaseMouse
wavey Antec truepower 2 550w thermaltake soprano wireless tracball 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Pentium D pressler 920 asus p5ld2 win XP nec 17in. lcd 
KeyboardPowerCaseMouse
wavey Antec truepower 2 550w thermaltake soprano wireless tracball 
  hide details  
Reply
post #24 of 44
supratt, you are not testing stability by loading Prime95. your prime95 is simply not loading correct? its not testing and failing, i think he was confused. your problem is a program error not a stability error.
Rig Specs
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X3 445 Rana ASUS M4A77T/USB3 eVGA GTX 750 Ti G.SKILL Ripjaws 4GB DDR3 1600 
Hard DriveOSMonitorKeyboard
OCZ Agility 2 120gb + WD 80gb HDD Windows 7 Pro 64-bit Samsung SyncMaster P2450 Logitech Internet Pro 
PowerCaseMouseMouse Pad
OCZ GameXStream 600w Thermaltake Soprano Logitech mx518 Steelpad QCK 
  hide details  
Reply
Rig Specs
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X3 445 Rana ASUS M4A77T/USB3 eVGA GTX 750 Ti G.SKILL Ripjaws 4GB DDR3 1600 
Hard DriveOSMonitorKeyboard
OCZ Agility 2 120gb + WD 80gb HDD Windows 7 Pro 64-bit Samsung SyncMaster P2450 Logitech Internet Pro 
PowerCaseMouseMouse Pad
OCZ GameXStream 600w Thermaltake Soprano Logitech mx518 Steelpad QCK 
  hide details  
Reply
post #25 of 44
Thread Starter 
Quote:
Originally Posted by Sk88erguy
supratt, you are not testing stability by loading Prime95. your prime95 is simply not loading correct? its not testing and failing, i think he was confused. your problem is a program error not a stability error.

exactly... it wont even load up. i hit 3.9 today, but it rebooted after about 3 minutes so i lowered it back to 3.6( which was tested a while back before the hd problems)
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Pentium D pressler 920 asus p5ld2 win XP nec 17in. lcd 
KeyboardPowerCaseMouse
wavey Antec truepower 2 550w thermaltake soprano wireless tracball 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Pentium D pressler 920 asus p5ld2 win XP nec 17in. lcd 
KeyboardPowerCaseMouse
wavey Antec truepower 2 550w thermaltake soprano wireless tracball 
  hide details  
Reply
post #26 of 44
Quote:
Originally Posted by supratt93
exactly... it wont even load up. i hit 3.9 today, but it rebooted after about 3 minutes so i lowered it back to 3.6( which was tested a while back before the hd problems)
i had the machine booted to 3.9 for about 10-15 minutes running at about 42C....everything was fine but as soon as i loaded prime95 about 5-10 minutes it rebooted....im not sure if the volatage was not enough but i had it at 1.5 or it could have been the ram....i will try again today since i figured out the max my ram can go...ill post results
E6600
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 C2D @ 3.6 P5B-D EVGA 7600GT 2GB Gskill HZ 
Hard DriveOptical DriveOSMonitor
74gb Raptor Samsung DVD+ XP LG 19inch 
PowerCase
Rosewill 600w Raidmax Silmodon 
  hide details  
Reply
E6600
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 C2D @ 3.6 P5B-D EVGA 7600GT 2GB Gskill HZ 
Hard DriveOptical DriveOSMonitor
74gb Raptor Samsung DVD+ XP LG 19inch 
PowerCase
Rosewill 600w Raidmax Silmodon 
  hide details  
Reply
post #27 of 44
Thread Starter 
good luck. i think that ram is my issue here as well. i might need some ddr2... thats why im trying to sell this computer want to go pressler DC and ddr2
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Pentium D pressler 920 asus p5ld2 win XP nec 17in. lcd 
KeyboardPowerCaseMouse
wavey Antec truepower 2 550w thermaltake soprano wireless tracball 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Pentium D pressler 920 asus p5ld2 win XP nec 17in. lcd 
KeyboardPowerCaseMouse
wavey Antec truepower 2 550w thermaltake soprano wireless tracball 
  hide details  
Reply
post #28 of 44
i could be way wrong here but THINK rebooting is usually a ram issue. i would run your 3.9 and higher tests on a divider, so you know your ram isnt the issue then you can be sure your CPU cant handle it.
Rig Specs
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X3 445 Rana ASUS M4A77T/USB3 eVGA GTX 750 Ti G.SKILL Ripjaws 4GB DDR3 1600 
Hard DriveOSMonitorKeyboard
OCZ Agility 2 120gb + WD 80gb HDD Windows 7 Pro 64-bit Samsung SyncMaster P2450 Logitech Internet Pro 
PowerCaseMouseMouse Pad
OCZ GameXStream 600w Thermaltake Soprano Logitech mx518 Steelpad QCK 
  hide details  
Reply
Rig Specs
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X3 445 Rana ASUS M4A77T/USB3 eVGA GTX 750 Ti G.SKILL Ripjaws 4GB DDR3 1600 
Hard DriveOSMonitorKeyboard
OCZ Agility 2 120gb + WD 80gb HDD Windows 7 Pro 64-bit Samsung SyncMaster P2450 Logitech Internet Pro 
PowerCaseMouseMouse Pad
OCZ GameXStream 600w Thermaltake Soprano Logitech mx518 Steelpad QCK 
  hide details  
Reply
post #29 of 44
I have created many systems based on ASUS P4P800 (-E/-E Deluxe, SE) and have found that 3.8GHz is the maximum prime95 (Two instances) stable speed on air with decent air cooling.

With more extreme measures you can achieve a higher o/c but I do congratulate you on reaching this pinnacle as many won't.

R
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
post #30 of 44
Quote:
Originally Posted by Ropey
I have created many systems based on ASUS P4P800 (-E/-E Deluxe, SE) and have found that 3.8GHz is the maximum prime95 (Two instances) stable speed on air with decent air cooling.

With more extreme measures you can achieve a higher o/c but I do congratulate you on reaching this pinnacle as many won't.

R
Yea, but if your running a prescott off of a p4p, your not going to reach your max, simply due to the chipset (i865 springy). If you get a motherboard with an 875P chipset then you will reach your max, though the asus board does handle those Prescotts well. So yea, i would say about 3.8 on that board / air is gonna be your max
    
CPUMotherboardGraphicsRAM
T2500 Core Duo Dell Laptop Quadro 1500m flashed--> 7900GTX 2x1GB G.Skill DDR2-800 
Hard DriveOptical DriveOSMonitor
200GB SATA 5400RPM 8x DVD±RW Burner XP Home SP2 17" LCD (1920x1200) + 20.1" Samsung Widescreen 
KeyboardPowerCaseMouse
GE Keyboard 9 Cell Battery E1705 Frame Razer Diamondback 
Mouse Pad
Icemat 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
T2500 Core Duo Dell Laptop Quadro 1500m flashed--> 7900GTX 2x1GB G.Skill DDR2-800 
Hard DriveOptical DriveOSMonitor
200GB SATA 5400RPM 8x DVD±RW Burner XP Home SP2 17" LCD (1920x1200) + 20.1" Samsung Widescreen 
KeyboardPowerCaseMouse
GE Keyboard 9 Cell Battery E1705 Frame Razer Diamondback 
Mouse Pad
Icemat 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need help getting to 4.0 GHz