I am very confused here... I will give some specs..
Motherboard : N2PAP-LITE
Processor : AMD Sempron 2800+
Socket : A/462
FSB : 166/333mhz
Multiplier : x12
Clock Speed : 166mhz x 12 = ~2ghz
The stock FSB is 333mhz but there is an option to set it to 400mhz. For some reason when you set the FSB in the BIOS it is cut in half, I believe it ends up coming out to double. So I want to set the BIOS to 200mhz which equals 400mhz. When I set it to 400mhz it will not POST so I have to reset the CMOS. It does not make any sense to me and I can't raise the core voltage any higher than 1.7 which is the default. I can lower it to 1.6 but thats about it. It will post with the settings (Clock : 166mhz, DRAM : 200mhz). I figure if they have it in the BIOS it should be able to work. Any help would be appreciated, thanks.
Edited by XxXxRobxXxX - 2/20/10 at 5:55pm
Motherboard : N2PAP-LITE
Processor : AMD Sempron 2800+
Socket : A/462
FSB : 166/333mhz
Multiplier : x12
Clock Speed : 166mhz x 12 = ~2ghz
The stock FSB is 333mhz but there is an option to set it to 400mhz. For some reason when you set the FSB in the BIOS it is cut in half, I believe it ends up coming out to double. So I want to set the BIOS to 200mhz which equals 400mhz. When I set it to 400mhz it will not POST so I have to reset the CMOS. It does not make any sense to me and I can't raise the core voltage any higher than 1.7 which is the default. I can lower it to 1.6 but thats about it. It will post with the settings (Clock : 166mhz, DRAM : 200mhz). I figure if they have it in the BIOS it should be able to work. Any help would be appreciated, thanks.
Edited by XxXxRobxXxX - 2/20/10 at 5:55pm
My System
(13 items) |
|
My System
(13 items) |
