Overclock.net › Forums › AMD › AMD Motherboards › [Official] Asus CrossHair IV Formula/Extreme Club
New Posts  All Forums:Forum Nav:

[Official] Asus CrossHair IV Formula/Extreme Club - Page 1201

post #12001 of 13131
Yeah no. IMC is just fine. Plenty of people have run Thubbies on CIVF. I think the problem is that it's just not on QVL and even though you could fire up using GoButton on a quad, you may not get the same results you got with Quad using non QVL RAM on Thubbie. 1055T was out before 1090T and if I'm going through this same issue that you're going through I would think that it's not the CPU but ASUS not updating the QVL. I'm gonna call their Motherboard Division right now and see if I can get them on this. They should have a set of 8Gig Snipers to cobble together an updated BIOS.

Thought it might've been cause this CPU was dropped prior to installation but no pins were bent(thank god) and I'm having the same exact problems you are but no RAM to change over to at the moment. It was hell pulling the RAM from under my freshly re-installed CPU out tube, so it looks like I'm gonna drain my loop and stick a 45 there which I probably shoulda done already. Oh well this is as good a time as any to iron out the bugs I guess. I got 13 days to get it together for Chimpin. mellowsmiley.gif

~Ceadder smil3dbd4e4c2e742.gif
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12002 of 13131
Quote:
Originally Posted by Ceadderman View Post

Yeah no. IMC is just fine. Plenty of people have run Thubbies on CIVF. I think the problem is that it's just not on QVL and even though you could fire up using GoButton on a quad, you may not get the same results you got with Quad using non QVL RAM on Thubbie. 1055T was out before 1090T and if I'm going through this same issue that you're going through I would think that it's not the CPU but ASUS not updating the QVL. I'm gonna call their Motherboard Division right now and see if I can get them on this. They should have a set of 8Gig Snipers to cobble together an updated BIOS.
Thought it might've been cause this CPU was dropped prior to installation but no pins were bent(thank god) and I'm having the same exact problems you are but no RAM to change over to at the moment. It was hell pulling the RAM from under my freshly re-installed CPU out tube, so it looks like I'm gonna drain my loop and stick a 45 there which I probably shoulda done already. Oh well this is as good a time as any to iron out the bugs I guess. I got 13 days to get it together for Chimpin. mellowsmiley.gif
~Ceadder smil3dbd4e4c2e742.gif

While your at it since you have their ear please tell them about the Corsair Vengeance Ram. Mine are 4gb 1600mhz modules at cas 7-8-8-24. Made a mistake earlier saying they were 2gb modules. Next month when I go with an X79 those modules hopefully will work in quad channel mode. I can't wait. Too broke right now for that though. Anyhow been in difficult situations before changing the fans off of my radiator a couple years ago with virtually no room to manever and had to use a 90 deg angled screw driver to install them. That was a joy!
post #12003 of 13131
Wasn't able to get through so I've pulled the CMOS and will let it set overnight. Hopefully I can get it to work tomorrow. mellowsmiley.gif

~Ceadder smil3dbd4e4c2e742.gif
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12004 of 13131
Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif

~Ceadder smil3dbd4e4c2e742.gif
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12005 of 13131
Quote:
Originally Posted by Ceadderman View Post

Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif
~Ceadder smil3dbd4e4c2e742.gif

This might sound like a dumb question but I gotta do it anyway.
One of these days I dedicated my time to see what I can get with pure RAM speed and timings, the difference in speeds werent big enough to consider all the trouble I see you already had Ceadder.
When I built my rig I remember you posting cause you had RAM problems with the Sniper, I think that I would in your position try to get something in the likes of 1866Mhz with very low latency just to save me the long nights spent trying to get it working.
Wouldnt it be easier if you just bought a very low latency kit with a good speed? Or actually n extremely high frequency kit and lower the frequency+lower latency to get better results, stability etc?
Something like 2200Mhz CL9 and try to lower it to 1866 CL7? I dunno, was just wondering tongue.gif
post #12006 of 13131
Hi,

I got through to Raja at Asus about the CH4 board and this is what he said:


Anything pre-Bulldozer is all over the place in terms of the memory controller. Some fo the CPUs are very flaky with 16GB installed. I managed to get some intel spec'd kits stable by setting the following:

http://rog.asus.com/forum/showthread.php?3468-Crosshair-V-Formula-Easy-Memory-Setup-Guide&country=&status=


this is also a good resource for info:

http://rog.asus.com/forum/showthread.php?2585-ASUS-Crosshair-V-Formula-BIOS-Guide-Overclocking&country=&status=

-Raja
post #12007 of 13131
Quote:
Originally Posted by Ceadderman View Post

Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif
~Ceadder smil3dbd4e4c2e742.gif

high performance ram is very hard to find at this time

 

look at some of these

http://www.newegg.com/Product/Productcompare.aspx?Submit=ENE&N=100007611%2050008476%20600006050%20600052012%20600006142&IsNodeId=1&bop=And&ShowDeactivatedMark=False&CompareItemList=147%7C20%2D231%2D455%5E20%2D231%2D455%2DTS%2C20%2D231%2D468%5E20%2D231%2D468%2DTS

 

these are my setting on my ch4e overclocked 1100T to 4ghz with dominators but i like g.skill's better

 

mem3.JPG

 

mem2.JPG


Edited by Tweeky - 5/4/12 at 11:34am
    
CPUMotherboardGraphicsRAM
FX-8150 @ 4389 MHz Crosshair V Formula 2 @ XFX-695X-ZDDC Crossfire G.skill F3-16000CL7D-4GBFLS 
Hard DriveHard DriveOptical DriveCooling
2 @ MKNSSD120GB-DX SSD SATA III Raid 0 2 WD 640GB Blacks SATA III Raid 0 2-Liteon iHAS424-98 LS Zalman 9900 Max Red 
OSMonitorKeyboardPower
Win 7 64 bit SP1 Samsung PX2370 Logitech MK700 Thermaltake TR2 850w 
CaseMouseAudioOther
Cooler Master ATCS 840 Logitech M705 Supreme FX X-Fi 2 AFT card reader USB 3.0 PRO-57U 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
FX-8150 @ 4389 MHz Crosshair V Formula 2 @ XFX-695X-ZDDC Crossfire G.skill F3-16000CL7D-4GBFLS 
Hard DriveHard DriveOptical DriveCooling
2 @ MKNSSD120GB-DX SSD SATA III Raid 0 2 WD 640GB Blacks SATA III Raid 0 2-Liteon iHAS424-98 LS Zalman 9900 Max Red 
OSMonitorKeyboardPower
Win 7 64 bit SP1 Samsung PX2370 Logitech MK700 Thermaltake TR2 850w 
CaseMouseAudioOther
Cooler Master ATCS 840 Logitech M705 Supreme FX X-Fi 2 AFT card reader USB 3.0 PRO-57U 
  hide details  
Reply
post #12008 of 13131
Quote:
Originally Posted by Ceadderman View Post

Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif
~Ceadder smil3dbd4e4c2e742.gif

I have a set of 2x2GB 2000MHz dominators (version 7.1: PSC) that works rather well with my 960T.
Test rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sempron 145 @ 4.6GHz Asus M2N32-SLI Deluxe 8800GT Crucial Ballistix 4x1GB 
  hide details  
Reply
Test rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Sempron 145 @ 4.6GHz Asus M2N32-SLI Deluxe 8800GT Crucial Ballistix 4x1GB 
  hide details  
Reply
post #12009 of 13131
Quote:
Originally Posted by Tokkan View Post

Quote:
Originally Posted by Ceadderman View Post

Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif
~Ceadder smil3dbd4e4c2e742.gif

This might sound like a dumb question but I gotta do it anyway.
One of these days I dedicated my time to see what I can get with pure RAM speed and timings, the difference in speeds werent big enough to consider all the trouble I see you already had Ceadder.
When I built my rig I remember you posting cause you had RAM problems with the Sniper, I think that I would in your position try to get something in the likes of 1866Mhz with very low latency just to save me the long nights spent trying to get it working.
Wouldnt it be easier if you just bought a very low latency kit with a good speed? Or actually n extremely high frequency kit and lower the frequency+lower latency to get better results, stability etc?
Something like 2200Mhz CL9 and try to lower it to 1866 CL7? I dunno, was just wondering tongue.gif

Quote:
Originally Posted by Tweeky View Post

Quote:
Originally Posted by Ceadderman View Post

Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif

~Ceadder smil3dbd4e4c2e742.gif
high performance ram is very hard to find at this time

look at some of these Warning: Spoiler! (Click to show)


Quote:
Originally Posted by DrSwizz View Post

Quote:
Originally Posted by Ceadderman View Post

Sorry bout the double post guys, but I'm looking to see if Dominators (Specifically 1866/2000 series) work with Thubbie on the Crosshair IV Formula. I'm currently down and need to find some RAM that will work with 6Core Thubans an Pronto. Appreciate any assistance. smile.gif
~Ceadder smil3dbd4e4c2e742.gif

I have a set of 2x2GB 2000MHz dominators (version 7.1: PSC) that works rather well with my 960T.

Already tried POSTing with GSkill Ripjaws 2x4GB, RJX 2x4 and 2x4 of GSkill Snipers. All 1600 series and all with 2 and 1 stick variations. System will NOT go through DRAM.

Also tried a set of OCZ Gold Z3 Series 1333 2x4GB both one and 2 sticks.

It's not a need to go 1866 or 2000 but more of a preference to give me some headroom to OC the RAM by Multiplier to see how tight I can trim up the Frequency w/o going over spec'ed rating.

I'm running 2002 already so I'm not sure why exactly it's having an issue with 1055T, but I have a 1100T handy that I can throw at it too. But since it's not POSTing on 2002 with the RAM that I do have I'm thinking that it won't matter what I put in it and just wish to save a couple steps if I can with my loop having been refilled. This is the fourth time in the last few days that my loop has been drained and refilled. who-let-rip-smiley.png

No I don't NEED to get them in 2000 series but I think that getting Doms again is the way to go.

I've Reseated the CPU, changed TIM, reseated the block a number of times, figured out that the CPU light stayed lit and didn't blink w/ no RAM in sockets but DRAM didn't blink at all. Didn't even attempt to come on which was expected with no RAM in place but it cleared the CPU from the list of suspects. thinking.gif Although it's still a possibility if the BIOS somehow got borked.

The trouble here really is going from Quad to Hexacore with an Overclock on board. But I've cleared the CMOS by hand and by lifting the Battery for 24hours. That SHOULD have cleared the frickin thing. My next step will probably be flipping the 1055 over to this M4A89GTD Pro/USB3 and reattempting POST with the 965 that's in it. If both systems fire up as I expect they should, then it will just confirm what I suspect and that being that RAM that is not on the QVL and being OC'ed to 1600 blocked the upgrade. If the 965 fails to POST then it's the Board. There are not too many steps here that I have left to do. mellowsmiley.gif

Getting Doms though is what I was already going to do and I know they work having run them on Day 1. smile.gif

~Ceadder smil3dbd4e4c2e742.gif
Edited by Ceadderman - 5/4/12 at 4:29pm
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12010 of 13131
Well honestly I wish you good luck, and that you solve your problem. My computer is almost making one year and my RAM hasnt given me any problem, its a 1333Mhz CL7 kit, already had them stable with 1866mhz increasing the timings to CL 9-10-9-31 iirc just to benchmark them. They didnt seem stable.
Have them running at 1600Mhz CL 9-9-9-24, Gskill Ripjaws.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › [Official] Asus CrossHair IV Formula/Extreme Club