Then I couldn't honestly say what it was. If something clicks I'll get back to you.
Originally Posted by SpaceCowboy
The speed monitoring wire is hooked to the CPU fan header. It reads 4,000-4,3000 rpm's.The coolant is not moving. I do see some tiny bubbles coming out of the pump outlet barb, but they fall back down in to the outlet after they hit their apex. The main power is hooked up to the PSU & the pump is vibrating if I touch it. It was working when I started to fill the loop. All of the hoses are filled with coolant, it just stopped moving. No more gurgling noises from the radiator like when it's purging air. I tried adjusting items related to fans in the BIOS several times, but nothing has worked so far. It almost seems like an impeller that is no longer attached to the shaft.
Well I finally broke this Board's cherry and it's kind of anticlimactic.
It's running fine but the OC set my RAM timings back to 9-9-9-24
And my Video while working isn't as stable as I would have hoped. Everytime I go to adjust a window the window seems to expand further than where I'm taking the edge and then it's fine when I let it go. It's nothing to be alarmed about I think, because it's just the outline of the window. But it's annoying. I think I need to get into the BIOS and readjust my timings back to stock 7-7-7-20 timings and maybe tighten things up a bit in the 965 BE OC settings.
~CeadderEdited by Ceadderman - 7/12/10 at 3:50pm