Originally Posted by wheth4400
Ok I am trying to figure these new setting out. Can someone please explain to me what each are, and if it is better to have them set higher or lower.
They are CPU PWN Frequenct
PWN Phase Control
CPU/NB Voltage OCP
CPU Voltage OCP
and then the differences in 50% and 100% LLC
PWN is the frequencies the VRMs "update" at leave at auto.
PWN phase control you want this set to all basically it is a power saving feature.
OCP's are over current protection you want those disabled.
The differances are how much it compensates for Vdroop.
Originally Posted by antuk15
As I've said multiple times now...THE BOARD REFUSES TO RUN In dual channel mode
How about this, you find some ram(borrow it what ever) that is on the QVL and see if its the board or the ram. Then come back and report.Edited by eclipseaudio4 - 1/13/11 at 11:54pm