I believe i found the cause of the high temptures
This is well beyond me. I really need advice.
Everything in the bios is set to default
It does not show this in the previous screenshot but the vcore voltage is 1.22 volts
this voltage tends to jump everywhere in the Sensor Recorder. Usualy between 1.2 and 1.303 while on defaults (auto)
I just realized that this voltage should be around 1.38 if im not mistaken for the 1100T Processor
What i did was manualy change the voltage from auto to 1.38
This corrects the tempture of the area probed to 45-50 C
Even during a realtime full load test the probe tempture droped sharply and quickly.
Now when i put the CPU through the large FFT test the voltage sensor jumps even more from 3.8 at idle to either 1.50-1.68 at load OR drops back down to 1.28 at load
This is beyond my logic
Not to mention that the CPU tempture is even hotter at 65c+ because of the extra voltage from 1.5 volt jumps.
Am i misunderstanding something here? Shouldnt it stay remotely near the voltage i set it to?
Perhaps im too late and the high 90c temps damaged something already?
I greatly appreciate your help guys. This is getting me pretty upset. Ive been through computer hell the last week with a DOA MSI board and now this.