Okay I'm attempting 4.0 again.
I've set up like this:
CPU Bus 250
NB Speed 2500Mhz
CPU 37c @minor load(Folding is paused)
RAM is set to 1333 1667
. When I went back into my BIOS to make the necessary changes I noticed D.O.C.P. was not active and my RAM was downclocked to 1062. Not sure how that happened cause I was pretty certain that I had reset it to 1333. But the system was active. My system is set to Manual. LLC and CPU LLC has not been messed with.
Just wanted to start out as close to base clocks as possible and will work through there since that's where I was last time and having 3 hours of stability before my first BlueScreen.
So I'm gonna restart Prime95 and see what happens.
BSoD ran through so quick I couldn't get the number for it.
CPU LLC 100%
CPU/NB LLC 100%
And left all previous settings in place. System POSTed for the first time in 1600 which is a minor miracle to me.
Ran MaxxMEM2 without issue.Damn this is some fast RAM in CAS 9 settings. These Sticks are AWESOME!!!
*Update #2* BSoD
CPUv to 1.45v
*Update 3* BlackScreened.
CPUv back to 1.43v
*Update 4* BSOD quicker. Probably should tweak the NB Freq if this one fails.(Anyone?)
Disabled OV Don't know if I was supposed to to that earlier. It's done now.
CPU/NB to 1.38v
My apologies I'm using this post to keep track of what I'm doing more than updating you fellas. I hope it's entertaining at least.
~CeadderEdited by Ceadderman - 5/3/11 at 10:21pm