Overclock.net › Forums › AMD › AMD CPUs › Need some help, please 2800+ o/c wont beep.
New Posts  All Forums:Forum Nav:

Need some help, please 2800+ o/c wont beep.

post #1 of 7
Thread Starter 
Hey yall I ended up getting a good overclock out of my cpu with these settings. 1.HT freq 4x. 2. Dram config=166 3. CPU overclock 250mhz. 4. DDR freq is 416 up from default 400. Got a single beep when i started it up and 2250mhz. Ran prime95 no crashes or lock ups. Played Doom3 for a hour no crashes. Well unfortunately I still dont know too much about O/C ing cause i thought i might be able to squeeze a little more power out of it. Raised the dram cfg to 200mhz voltage was default. Memory was at 1:1 I havent messed with the timings any more than that. When I rebooted it with these new settings I get a startup screen and one solid beep pause and then another the cpu line read 0. So I turned off the comp immediately and cleared the CMOS battery jumper I try to start it up now and I get no beep and a black monitor the monitor doesnt turn on Anybody have any ideas? Thanks.

I really just want to be able to get into the BIOS so I can put the settings back to my original O/C.
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
post #2 of 7
If you happened to leave the jumper on clear mode and powered up you may have damaged the COMS/BIOS and that will require an RMA.
Start with just a vid card, 1 RAM stick, CPU/FHS installed and plugged in.
No HDs, ROMS etc... try that to see if it boots after reclearing the CMOS.
    
CPUMotherboardGraphicsRAM
X4 965 ASUS M4A79 Deluxe 9800GTx2 2x2G OCZ Reapers 
Hard DriveOptical DriveOSMonitor
500G WD Black LiteOn CD/DVD R/W Win7 64 22'' ws Acer AL2223W 
KeyboardPowerMouse
MS KU462 Natural SS DA750 MS 5 button 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
X4 965 ASUS M4A79 Deluxe 9800GTx2 2x2G OCZ Reapers 
Hard DriveOptical DriveOSMonitor
500G WD Black LiteOn CD/DVD R/W Win7 64 22'' ws Acer AL2223W 
KeyboardPowerMouse
MS KU462 Natural SS DA750 MS 5 button 
  hide details  
Reply
post #3 of 7
Thread Starter 
Well this morning I went and tryed starting it again. I cleared the cmos battery again and put the jumper back on default. When I booted it I got a single beep and got a post code of 7f. I tryed getting into the BIOS by hitting Delete but the keyboard wasnt working. I checked keyboard cable it was fine. So I turned off comp and tryed reseting cmos one more time. When I rebooted I get no beep like before and the monitor is black. Why would it boot this morning when all I did was reset the jumper like before?
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
post #4 of 7
Thread Starter 
Well I just tryed booting with just a stick of ram vid card and no cd-rom drives after clearing cmos still wont beep and screen is still black. It should work I just cleared the cmos correctly arggh.
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
post #5 of 7
Unplug the psu. Hit the power button a couple times. Move cmos jumper to clear side and wait 10-20 seconds and move jumper back. Turn psu back on and try reboot.
Busa's Opti
(13 items)
 
  
CPUMotherboardGraphicsRAM
intel E6700 P5W DH Deluxe Wifi BFG 7800gtx 2g pc6400 4-4-4-12 
Hard DriveOptical DriveOSMonitor
2x WD 74G raptors in raid0 NEC 3520 winXP sp2 Dell 24" widescreen LCD 
KeyboardPowerCaseMouse
Z board w/bf2 keyset Zeus 650sli+450 dual booting UFO Opti1203 blk/UV blue logitech G7 
Mouse Pad
Xtrack "ripper" 
  hide details  
Reply
Busa's Opti
(13 items)
 
  
CPUMotherboardGraphicsRAM
intel E6700 P5W DH Deluxe Wifi BFG 7800gtx 2g pc6400 4-4-4-12 
Hard DriveOptical DriveOSMonitor
2x WD 74G raptors in raid0 NEC 3520 winXP sp2 Dell 24" widescreen LCD 
KeyboardPowerCaseMouse
Z board w/bf2 keyset Zeus 650sli+450 dual booting UFO Opti1203 blk/UV blue logitech G7 
Mouse Pad
Xtrack "ripper" 
  hide details  
Reply
post #6 of 7
Thread Starter 
I just did as you said and I dont get a boot and beep just a blank monitor.
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
post #7 of 7
Thread Starter 
So am I going to have to send my mobo back to Chaintech? How much would that cost roughly?
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Athlon 64 2800+ Chaintech VNF3-250 Windows XP Home SP2 17" AOC flat crt 
KeyboardPowerCaseMouse
Generic 420 watt ThermalTake ThermalTake Black Super Logitech MX700 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Need some help, please 2800+ o/c wont beep.