so my memory card for my camera is full and i uploaded some pictures so wile im waiting for my dinner to cook its UPDATE TIME!
i got home from work and it looked like this. rather rough but the filler has set up! thats always a plus.
time to get sanding.
i started with a 50 grit that i just grabbed out of the box of bits we have.
this is the result. nice and cleaned up a bit.
then i took some 320 grit i stole from work *sushhh dont tell my boss*
even better. but their are still some high spots i need to take down. cant really see them in the pic but they are painfully obvious.
after another few mins of sanding i broke through a bubble that fored under the filler on the aluminum... thats a problem... it was going so nicely too
after about 10 minuets of digging i found this stuff. my dad tells me its pretty good for a no mix stuff.
as i found its really thick and its easier to spread with your finger than with one of those plastic spreaders.
so i pushed it into the bubble and a spot i wasn't quite happy with and scraped off as much of the excess as i could.
and now im off to go eat wile that sets up. Dad tells me it should be good enough to sand in about 30 minuets.
thanks to all that have voted for me for MOTM!
if you haven't yet i dont like you and if you want me to like you you should go vote NOW! then i will love you forever