Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 117

post #1161 of 3826
Almost got all the parts to fix up my water-cooling having some issues finding 90 degree barbs for the right price. Hopefully when I get that sorted I can add a few more inches to my e-penis
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
post #1162 of 3826
Thread Starter 
YO you guys should download and update your old bios to FC3, look on tweaktown, for the rev 2.0 of this board, it updates the marvell controller very nicely and also fixed slow mode problem, from what i have seen slow mode now works.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1163 of 3826
Most people are on f7 f8 as far as I can see
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
post #1164 of 3826
Thread Starter 
well those bios are for the first rev. the second rev has a new bios, just released. It does a lot of good. I think they released a new bios for the rev 1.0 to fix slow mode as well.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1165 of 3826
Quote:
Originally Posted by Gorki View Post
Hey stasio, where did they lost F8a?

+ rep for bios support!
thanks!
Hi Gorki,
ha,ha they ask me not to post F8a and F8b,till all bugs gone.
Gigabyte
(17 items)
 
  
CPUCPUMotherboardGraphics
Core i7-4790K @ 4.9 GHz Core i7-4770K @ 4.7 GHz GA-Z170X-SOCF /GA-Z97X-SOCF/ GA-Z87X-UD3H  Evga GTS 450 SC 
RAMHard DriveOptical DriveCooling
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-... 2xSSD Corsair Force GS 128 (RAID 0), WD Caviar ... LG 62N SATA XSPC RayStorm D5 EX240 (Liquid Ultra)  
OSMonitorPowerCase
Win 7 SP1,Win 8.1,Win 10 (x64) LG 1960TR Gigabyte Superb 720W NZXT Phantom 630 Ultra Tower  
  hide details  
Reply
Gigabyte
(17 items)
 
  
CPUCPUMotherboardGraphics
Core i7-4790K @ 4.9 GHz Core i7-4770K @ 4.7 GHz GA-Z170X-SOCF /GA-Z97X-SOCF/ GA-Z87X-UD3H  Evga GTS 450 SC 
RAMHard DriveOptical DriveCooling
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-... 2xSSD Corsair Force GS 128 (RAID 0), WD Caviar ... LG 62N SATA XSPC RayStorm D5 EX240 (Liquid Ultra)  
OSMonitorPowerCase
Win 7 SP1,Win 8.1,Win 10 (x64) LG 1960TR Gigabyte Superb 720W NZXT Phantom 630 Ultra Tower  
  hide details  
Reply
post #1166 of 3826
So has the Marvell issue been sorted? My question is Marvell Vs. ICH10R and would it be faster to switch raid 0 from the intel to the Marvell controller? Also Ahci as opposed to raid 0, which is better and why. Sorry for the nooby q's but I am about to build my UD7 soon and have just got myself 2 OCZ 60gig vertex 2 drives and not sure how I should set them up. Any advise would be great.
Beats The TV
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 965 extreme @4.2Ghz GA-X58A-UD7 rev2 evga GTX 295 dual pcb ver Corsair Dominator GT 2000 6g 
Hard DriveOptical DriveOSMonitor
OCZ vertex 2 SSD's 60g x 2 Asus DVD RW Win 7 64bit Ultimate Samsung 2493HM 24" 
KeyboardPowerCaseMouse
Logitech G15 corsair 1200w Coolermaster HAF X Logitech G9 
  hide details  
Reply
Beats The TV
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 965 extreme @4.2Ghz GA-X58A-UD7 rev2 evga GTX 295 dual pcb ver Corsair Dominator GT 2000 6g 
Hard DriveOptical DriveOSMonitor
OCZ vertex 2 SSD's 60g x 2 Asus DVD RW Win 7 64bit Ultimate Samsung 2493HM 24" 
KeyboardPowerCaseMouse
Logitech G15 corsair 1200w Coolermaster HAF X Logitech G9 
  hide details  
Reply
post #1167 of 3826
Here is a Linx 20 run stable @ 4.5 template.

Code:
GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 30
CPU Frequency ........................(GHz): 4.5
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Disabled
CPU Cores Enabled..........................: All
CPU Multi Threading........................: Disabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Disabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Disabled

QPI Clock Ratio............................: x48
QPI Link Speed........................(GHz): 7.2
Uncore Clock Ratio.........................: Auto [x20]
Uncore Frequency......................(MHz): 3000
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 150
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1800
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1800
Performance Enhance........................: Standard
DRAM Timing Selectable (SPD)...............: Quick
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: 6
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 7
tRCD.......................................: 7
tRP........................................: 7
tRAS.......................................: 21
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: 88
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: -
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: L2
CPU Vcore..................................: 1.44375
xDynamic Vcore(DVID).......................: 0
QPI/VTT Voltage............................: Auto [1.355]
CPU PLL....................................: Auto [1.8]
>>> MCH/ICH
PCIE.......................................: Auto [1.5]
QPI PLL....................................: Auto [1.1]
IOH Core...................................: Normal [1.1]
ICH I/O....................................: Auto [1.5]
ICH Core...................................: Auto [1.1]
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: .75
Ch-A Data VRef.............................: .75
Ch-B Data VRef.............................: .75
Ch-C Data VRef.............................: .75
Ch-A Address VRef..........................: .75
Ch-B Address VRef..........................: .75
Ch-C Address VRef..........................: .75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Disabled

GOOC 2010 WWF Rev.2 Settings Only

GOOC Lean Mode.............................: On
GOOC extreme clock.........................: Enabled
GOOC extreme temp..........................: Disabled

The attached .jpg has the particulars. Hope it helps someone.
MVF
(4 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K MAXIMUS V FORMULA AMD Radeon HD 7900 Series G Skill Trident X 2x8Gb DDR3 2400 
  hide details  
Reply
MVF
(4 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K MAXIMUS V FORMULA AMD Radeon HD 7900 Series G Skill Trident X 2x8Gb DDR3 2400 
  hide details  
Reply
post #1168 of 3826
hi, to set my ram to 2000MHz memory, I need to give the QPI vtt 1.60 v to set the uncore to 4000 ... too much for a dayli use ... I think I understand that Intel has suggested should not exceed 1.35 V QPI vtt ... ! right?
you say? the votlaggio is too high?

thank you very much
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 950 UD7-X58A REV 2 Zotec Gtx 580 3x4gb 1600mhz Vengeance CMZ12GX3M3A1600C9 
Hard DriveCase
2xSSD Vertex 2 120Gb Raid0 HAF 922 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 950 UD7-X58A REV 2 Zotec Gtx 580 3x4gb 1600mhz Vengeance CMZ12GX3M3A1600C9 
Hard DriveCase
2xSSD Vertex 2 120Gb Raid0 HAF 922 
  hide details  
Reply
post #1169 of 3826
Quote:
Originally Posted by dr_dx View Post
Here is a Linx 20 run stable @ 4.5 template.

The attached .jpg has the particulars. Hope it helps someone.
Oh man, 96gflops, that's just sexy

Quote:
Originally Posted by Rafiluccio View Post
hi, to set my ram to 2000MHz memory, I need to give the QPI vtt 1.60 v to set the uncore to 4000 ... too much for a dayli use ... I think I understand that Intel has suggested should not exceed 1.35 V QPI vtt ... ! right?
you say? the votlaggio is too high?

thank you very much

1.60 VTT is pretty high for daily use yeah, I'ld be careful with that, are you sure you can't pull it off with less? like 1.50? (usually 2000mhz RAM = 1.50VTT, still a bit high imho for daily use)
Try lowering the uncore multiplier (to lower the uncore frequency), set it at a low ratio, like x16 or x18, try to keep that as low as possible that way you should be able to get 2000mhz ram stable at 1.50VTT

What speed is your BCLK at?

1.35 VTT is intels max "safe" btw, I wouldn't worry about that too much but 1.60 is pushing it.

There's a pretty good "guide" on the EVGA boards about "max" voltages etc. -> link
Edited by koji - 10/23/10 at 12:57am
Kaby
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 - 7700k MSI z270 Gaming M7 Asus GTX1070 FE Corsair Vengeance LED 2x 8gb dd43200 
Hard DriveCoolingMonitorKeyboard
Samsung EVO 960 m2 Noctua NH-D15 Eizo FS2434 Corsair Strafe RGB 
PowerCaseMouseAudio
Corsair RMI 850 Corsair 570x Logitech G502 Soundblaster Zx / PC360 
  hide details  
Reply
Kaby
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 - 7700k MSI z270 Gaming M7 Asus GTX1070 FE Corsair Vengeance LED 2x 8gb dd43200 
Hard DriveCoolingMonitorKeyboard
Samsung EVO 960 m2 Noctua NH-D15 Eizo FS2434 Corsair Strafe RGB 
PowerCaseMouseAudio
Corsair RMI 850 Corsair 570x Logitech G502 Soundblaster Zx / PC360 
  hide details  
Reply
post #1170 of 3826
Quote:
Originally Posted by NoGuru View Post
Looks like the new Rev 2 BIOS fixes the SATA controler, but has no G00 features...bah.
Going to flash back to GOO
Gigabyte

Quote:
Originally Posted by bgraves View Post
Found Answer: The JMicron driiver needs to be updated. Get it from ftp://driver.jmicron.com.tw/jmb36x/XP_Vista_Win7/
There are 2 versions. JMB36X_WinDrv_R1.17.59_WHQL.zip will determine AHCI/IDE settings from BIOS. The other version ending in _eSATA forces disks to be removable regardless of BIOS. I used the first version and it works great.
Welcome and added to the owners list! I was looking for the answer to your problem. I realized, after reading your answer, that I overlooked the obvious on that one. I thought these drivers were updated by new BIOS releases, but I was wrong. +Rep for your great contribution!

Quote:
Originally Posted by koji View Post
K, managed to get f7x stable without too much hassle actually. Got some pretty good results playing with CPU PLL, might tweak around a bit more to get my vcore down toying with PLL, if I'm in the mood.

Everything stock, only adjusted, Vcore, CPU PLL and VTT. Almost forgot how much I like this board for OC'ing

http://users.telenet.be/koji/OC/i7/blends_f7x.JPG

http://users.telenet.be/koji/OC/i7/linx_f7x.JPG

Validation link -> http://valid.canardpc.com/show_oc.php?id=1443662
Awesome and updated, thank you!

Quote:
Originally Posted by Mr. Strawberry View Post
spot the glitch and you get a cookie
There's a cookie on your Vcore!

Quote:
Originally Posted by mrtomek View Post
Almost got all the parts to fix up my water-cooling having some issues finding 90 degree barbs for the right price. Hopefully when I get that sorted I can add a few more inches to my e-penis
Epeen is in the eyes of others. Looking forward to the pics when finished!

Quote:
Originally Posted by Sin0822 View Post
YO you guys should download and update your old bios to FC3, look on tweaktown, for the rev 2.0 of this board, it updates the marvell controller very nicely and also fixed slow mode problem, from what i have seen slow mode now works.
If you check back in the thread, the latest was posted. In the OP, there's also a link to the latest from stasio.

Quote:
Originally Posted by LaZyBoneS View Post
So has the Marvell issue been sorted? My question is Marvell Vs. ICH10R and would it be faster to switch raid 0 from the intel to the Marvell controller? Also Ahci as opposed to raid 0, which is better and why. Sorry for the nooby q's but I am about to build my UD7 soon and have just got myself 2 OCZ 60gig vertex 2 drives and not sure how I should set them up. Any advise would be great.
We could help you better, if we knew what was in your system. Please add your complete system information in the control panel. Thank you! Marvell (SATA 3) & ICH10R (The Rest) Latest drivers for both Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools.

Quote:
Originally Posted by dr_dx View Post
Here is a Linx 20 run stable @ 4.5 template.

Code:
GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 30
CPU Frequency ........................(GHz): 4.5
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Disabled
CPU Cores Enabled..........................: All
CPU Multi Threading........................: Disabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Disabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Disabled

QPI Clock Ratio............................: x48
QPI Link Speed........................(GHz): 7.2
Uncore Clock Ratio.........................: Auto [x20]
Uncore Frequency......................(MHz): 3000
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 150
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1800
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1800
Performance Enhance........................: Standard
DRAM Timing Selectable (SPD)...............: Quick
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: 6
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 7
tRCD.......................................: 7
tRP........................................: 7
tRAS.......................................: 21
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: 88
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: -
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: L2
CPU Vcore..................................: 1.44375
xDynamic Vcore(DVID).......................: 0
QPI/VTT Voltage............................: Auto [1.355]
CPU PLL....................................: Auto [1.8]
>>> MCH/ICH
PCIE.......................................: Auto [1.5]
QPI PLL....................................: Auto [1.1]
IOH Core...................................: Normal [1.1]
ICH I/O....................................: Auto [1.5]
ICH Core...................................: Auto [1.1]
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: .75
Ch-A Data VRef.............................: .75
Ch-B Data VRef.............................: .75
Ch-C Data VRef.............................: .75
Ch-A Address VRef..........................: .75
Ch-B Address VRef..........................: .75
Ch-C Address VRef..........................: .75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Disabled

GOOC 2010 WWF Rev.2 Settings Only

GOOC Lean Mode.............................: On
GOOC extreme clock.........................: Enabled
GOOC extreme temp..........................: Disabled

The attached .jpg has the particulars. Hope it helps someone.
If you would add a CPU-Z link, I can update your info. Looking great! +Rep

Quote:
Originally Posted by Rafiluccio View Post
hi, to set my ram to 2000MHz memory, I need to give the QPI vtt 1.60 v to set the uncore to 4000 ... too much for a dayli use ... I think I understand that Intel has suggested should not exceed 1.35 V QPI vtt ... ! right?
you say? the votlaggio is too high?

thank you very much
Have you tried any of the templates for those with 2000MHz memory? Those can help you get the high voltages under control.
Under The Radar
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD - Ryzen 7 1800X Gigabyte - GA-AX370-Gaming K7 Gigabyte - GeForce GTX 1080 Ti 11GB FE G.Skill - Flare X 32GB (4 x 8GB) DDR4-3200 
Hard DriveHard DriveOptical DriveCooling
Samsung - 850 Pro 512GB 2.5" SSD Western Digital - Black 6TB 3.5" 7200RPM HDD Asus - BW-12B1ST/BLK/G/AS Blu-Ray/DVD/CD Writer Corsair - H115i 104.7 CFM Liquid CPU Cooler 
OSMonitorMonitorKeyboard
Microsoft - Windows 10 Pro OEM 64-bit Acer - GN246HL 24" 1080p 144Hz Acer - G246HLAbd 24" 1080p 60Hz Ducky - Shine 4 
PowerCaseMouseMouse Pad
EVGA - SuperNOVA P2 650W 80+ Platinum Certified... Corsair - Vengeance C70 (Black) ATX Mid Tower Cooler Master - Xornet Fellowes - Microban 
Audio
2 x Realtek - ALC1220 2 - 7.1 Channel High Defi... 
  hide details  
Reply
Under The Radar
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD - Ryzen 7 1800X Gigabyte - GA-AX370-Gaming K7 Gigabyte - GeForce GTX 1080 Ti 11GB FE G.Skill - Flare X 32GB (4 x 8GB) DDR4-3200 
Hard DriveHard DriveOptical DriveCooling
Samsung - 850 Pro 512GB 2.5" SSD Western Digital - Black 6TB 3.5" 7200RPM HDD Asus - BW-12B1ST/BLK/G/AS Blu-Ray/DVD/CD Writer Corsair - H115i 104.7 CFM Liquid CPU Cooler 
OSMonitorMonitorKeyboard
Microsoft - Windows 10 Pro OEM 64-bit Acer - GN246HL 24" 1080p 144Hz Acer - G246HLAbd 24" 1080p 60Hz Ducky - Shine 4 
PowerCaseMouseMouse Pad
EVGA - SuperNOVA P2 650W 80+ Platinum Certified... Corsair - Vengeance C70 (Black) ATX Mid Tower Cooler Master - Xornet Fellowes - Microban 
Audio
2 x Realtek - ALC1220 2 - 7.1 Channel High Defi... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *