Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 135

post #1341 of 3829
Quote:
Originally Posted by koji View Post
You're underclocking CPU PLL (to 1.40), default CPU PLL voltage is 1.80, that's bound to cause issues. Try 1.84/1.86.

About that memory, I'm not claiming you can't get it stable, I'm just saying I'ld loosen up those timings for now, untill you get your CPU OC stable, then start tweaking the memory. C6 timings at CR1 are like, THOIGHT like a tiger!
Ok, thx m8

I just switched from UD5 to UD7 and from Dominator GT 1866 CL7 to STT Project X 2000C7, both chips Elpida Hyper but STT is high binned so better for me and GT's are running 1600 CL6 1.65V with UD5 for 6 months now so I'm pretty sure they are cool with 1600 CL6 (up to 1680 CL6 1.65v, 1800 CL6 1.70V for benchmarks) THOIGHT like a tiger...

CPU PLL 1.40V is rock solid at 200x21=4200, and it gives me about 9°C temp drop on all cores, I advise you to see it for your self If I use 1.88V I need better cooling to go 4410 so I'll stick to 4200 with good temps if there is no other advice
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3930K C2 4.6GHz 1.33V MSI Big Bang - XPower II Sapphire 7970 w/ Accelero Xtreme 7970 @ 1100/1500 G.Skill Ripjaws Z 4x4GB 2133MHz 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120GB, Seagate 2x 1TB Nec dvd/rw Noctua NH-D14 Windows 7 Enterprise X64 SP1 
MonitorKeyboardPowerCase
Dell U2711 Logitech G19 Corsair AX 1200W Cooler Master HAF 932 Advanced 
MouseMouse PadAudio
Logitech G9x ZOWIE GEAR G-TF Big Soft SpawN Edition Logitech G930 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3930K C2 4.6GHz 1.33V MSI Big Bang - XPower II Sapphire 7970 w/ Accelero Xtreme 7970 @ 1100/1500 G.Skill Ripjaws Z 4x4GB 2133MHz 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120GB, Seagate 2x 1TB Nec dvd/rw Noctua NH-D14 Windows 7 Enterprise X64 SP1 
MonitorKeyboardPowerCase
Dell U2711 Logitech G19 Corsair AX 1200W Cooler Master HAF 932 Advanced 
MouseMouse PadAudio
Logitech G9x ZOWIE GEAR G-TF Big Soft SpawN Edition Logitech G930 
  hide details  
Reply
post #1342 of 3829
Quote:
Originally Posted by almighty00 View Post
I was thinking to run the ram to manufactured specs so its potential could be realized. I'm new to overclocking and i haven bought a CPU cooler still using the stock fan so would like to take it slowly afraid to screw things up by overclocking all the components at once.

Btw would overclocking the cpu reduce the life span of the cpu significantly??
With Intel timings are more important then Mhz as far as ram go's, to a certain point.
Overclocking can reduce the life span, but if you do it right, you will never even notice. The chip will be LONG gone before it's life it over. For example, say the expected life span is 15 years and you put a major OC on your chip, you may lose 2 or 3 years off the chip but are you going to keep a PC for more then 10 years, I doubt it.

Even with the stock cooler you could do a small OC to say 3.0 or 3.2 and be safe. I would try that and see how your temps are. You may not even have to increase volts at that small of an OC.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #1343 of 3829
Sweet, thanks for all your help guys, I've got mine stable (so far, fingers crossed) at 3.9Ghz and my RAM is running at 1800Mhz, though I had to loosen the timings to 9-9-9-27 from 8-8-8-24.

Silly QPI had to be raised to 1.355 which is pink, so I enabled LLC at level 2 at it runs fine.

Here's my CPUZ link:

I'll post BIOS settings soon
Jim
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 3.78Ghz GA-X58A-UD7 rev 1.0 R5770HD 1Gb DDR5 (x2 Crossfired) 12Gb Kingston HyperX T1 @ 1800MHz 
Hard DriveOptical DriveOSMonitor
1Tb Seagate 7200rpm SATA (pending SSD) LG BH10LS30 Blu Ray Burner Windows 7 Ultimate x64 BenQ G2420HD 24" (x3) 
KeyboardPowerCaseMouse
Logitech MX3000 GW-1200SEL Lancool Dragonlord PC-K62 Gaming Airflow Logitech MX3000 
  hide details  
Reply
Jim
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 3.78Ghz GA-X58A-UD7 rev 1.0 R5770HD 1Gb DDR5 (x2 Crossfired) 12Gb Kingston HyperX T1 @ 1800MHz 
Hard DriveOptical DriveOSMonitor
1Tb Seagate 7200rpm SATA (pending SSD) LG BH10LS30 Blu Ray Burner Windows 7 Ultimate x64 BenQ G2420HD 24" (x3) 
KeyboardPowerCaseMouse
Logitech MX3000 GW-1200SEL Lancool Dragonlord PC-K62 Gaming Airflow Logitech MX3000 
  hide details  
Reply
post #1344 of 3829
Quick update, I never tried 4300 HT on, works fine without 124 BSOD (not enough/too high qpi/vtt voltage)

validation



Code:
GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 21
CPU Frequency ........................(GHz): 4.3
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Disabled
CPU Cores Enabled..........................: All
CPU Multi Threading........................: Enabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Disabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Enabled

QPI Clock Ratio............................: X36
QPI Link Speed........................(GHz): 7.38
Uncore Clock Ratio.........................: 16
Uncore Frequency......................(MHz): 3280
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 205
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1640
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1640
Performance Enhance........................: Standard
DRAM Timing Selectable (SPD)...............: Quick
Profile DDR Voltage........................: 1.65
Profile QPI Voltage........................: 1.17
Channel Interleaving.......................: Auto
Rank Interleaving..........................: Auto
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 6
tRCD.......................................: 6
tRP........................................: 6
tRAS.......................................: 18
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: 30
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: 60
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: Auto
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: LEVEL 2
CPU Vcore..................................: 1.4125
xDynamic Vcore(DVID).......................: Disabled
QPI/VTT Voltage............................: 1.355
CPU PLL....................................: 1.40
>>> MCH/ICH
PCIE.......................................: Normal
QPI PLL....................................: Normal
IOH Core...................................: Normal
ICH I/O....................................: Normal
ICH Core...................................: Normal
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: Auto
Ch-A Data VRef.............................: Auto
Ch-B Data VRef.............................: Auto
Ch-C Data VRef.............................: Auto
Ch-A Address VRef..........................: Auto
Ch-B Address VRef..........................: Auto
Ch-C Address VRef..........................: Auto

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Disabled

GOOC 2010 WWF Rev.2 Settings Only

GOOC Lean Mode.............................:
GOOC extreme clock.........................:
GOOC extreme temp..........................: 
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3930K C2 4.6GHz 1.33V MSI Big Bang - XPower II Sapphire 7970 w/ Accelero Xtreme 7970 @ 1100/1500 G.Skill Ripjaws Z 4x4GB 2133MHz 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120GB, Seagate 2x 1TB Nec dvd/rw Noctua NH-D14 Windows 7 Enterprise X64 SP1 
MonitorKeyboardPowerCase
Dell U2711 Logitech G19 Corsair AX 1200W Cooler Master HAF 932 Advanced 
MouseMouse PadAudio
Logitech G9x ZOWIE GEAR G-TF Big Soft SpawN Edition Logitech G930 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3930K C2 4.6GHz 1.33V MSI Big Bang - XPower II Sapphire 7970 w/ Accelero Xtreme 7970 @ 1100/1500 G.Skill Ripjaws Z 4x4GB 2133MHz 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120GB, Seagate 2x 1TB Nec dvd/rw Noctua NH-D14 Windows 7 Enterprise X64 SP1 
MonitorKeyboardPowerCase
Dell U2711 Logitech G19 Corsair AX 1200W Cooler Master HAF 932 Advanced 
MouseMouse PadAudio
Logitech G9x ZOWIE GEAR G-TF Big Soft SpawN Edition Logitech G930 
  hide details  
Reply
post #1345 of 3829
Thread Starter 
Hey so want to take it higher? use more qpi like 1.375-1.4, vcore to 1.44, uncore to 17x, pci-e to 103, blck to 215, and put both clock skews to 200. You switched from UD5 rev 2.0 to UD7 rev 2.0? Or rev 1.0 UD5 to rev 2.0 ud7? or rev 1.0 UD5 to rev 1.0 UD7, or rev 2.0 ud5 to rev 1.0 UD7? I am just curious? it says what rev on the box, or just tell me the number of power phases.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1346 of 3829
Thanks for your post, I don't have need to go that high, just playing with my new mobo and searching for some info's, I switched from EX58-UD5 to X58A-UD7 rev 1.

UD5 was not bad mobo but after I borrow Rampage III Extreme from my friend for few days I decided to go with better mobo, and I'm Giga fan (also upgrade from 790FXT-UD5P + X4 965 to 890FXA-UD5 + 1090T)
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3930K C2 4.6GHz 1.33V MSI Big Bang - XPower II Sapphire 7970 w/ Accelero Xtreme 7970 @ 1100/1500 G.Skill Ripjaws Z 4x4GB 2133MHz 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120GB, Seagate 2x 1TB Nec dvd/rw Noctua NH-D14 Windows 7 Enterprise X64 SP1 
MonitorKeyboardPowerCase
Dell U2711 Logitech G19 Corsair AX 1200W Cooler Master HAF 932 Advanced 
MouseMouse PadAudio
Logitech G9x ZOWIE GEAR G-TF Big Soft SpawN Edition Logitech G930 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3930K C2 4.6GHz 1.33V MSI Big Bang - XPower II Sapphire 7970 w/ Accelero Xtreme 7970 @ 1100/1500 G.Skill Ripjaws Z 4x4GB 2133MHz 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120GB, Seagate 2x 1TB Nec dvd/rw Noctua NH-D14 Windows 7 Enterprise X64 SP1 
MonitorKeyboardPowerCase
Dell U2711 Logitech G19 Corsair AX 1200W Cooler Master HAF 932 Advanced 
MouseMouse PadAudio
Logitech G9x ZOWIE GEAR G-TF Big Soft SpawN Edition Logitech G930 
  hide details  
Reply
post #1347 of 3829
Greetz All,
I'm new to the forum and the board, but would like to ask for some help: This weekend I'm building a new machine with a X58A-UD7 (v.2), Intel 980x, Kingston HyperX (3x4GB @ 1600), OCZ Vertex 2 100GB), Win7 x64 Pro, and air-cooled with a Cooler Master Hyper 212+.

Can somebody please help me with suggested BIOS settings, and any other great ideas for improving my build? I've built many computers previously (40-70 approx) but this will be my first O.C. effort. Also, any help on how to set up my board signature would be great.

Thanks!
O.C. Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 980x Extreme Gigabyte X58A-UD7 (rev 2.0) Gigabyte GTX 460 OC 768 Kingston HyperX 1600Mhz (3x4GB) 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 2 100GB Lite-On Lightscribe 24x Windows 7 Pro x64 Dell 2408wfp 
KeyboardPowerCaseMouse
MS Wireless Laser 6000 v2.0 Corsair Pro AX1200 Gold Cooler Master HAF 922 MS Wireless Laser 6000 
  hide details  
Reply
O.C. Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 980x Extreme Gigabyte X58A-UD7 (rev 2.0) Gigabyte GTX 460 OC 768 Kingston HyperX 1600Mhz (3x4GB) 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 2 100GB Lite-On Lightscribe 24x Windows 7 Pro x64 Dell 2408wfp 
KeyboardPowerCaseMouse
MS Wireless Laser 6000 v2.0 Corsair Pro AX1200 Gold Cooler Master HAF 922 MS Wireless Laser 6000 
  hide details  
Reply
post #1348 of 3829
Thread Starter 
Quote:
Originally Posted by Cele303 View Post
Thanks for your post, I don't have need to go that high, just playing with my new mobo and searching for some info's, I switched from EX58-UD5 to X58A-UD7 rev 1.

UD5 was not bad mobo but after I borrow Rampage III Extreme from my friend for few days I decided to go with better mobo, and I'm Giga fan (also upgrade from 790FXT-UD5P + X4 965 to 890FXA-UD5 + 1090T)
I was going to say if you "upgraded" from a UD5 rev 2.0 to UD7 rev 2.0, nothing should change. lol. But i see you know your stuff, the new UD5 is basically the same as the new ud7. I was just curios lol. but thats good if you don't need to increase voltage. You are lucky you found an older UD7 rev 1.0!
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1349 of 3829
Quote:
Originally Posted by kmss1 View Post
Greetz All,
I'm new to the forum and the board, but would like to ask for some help: This weekend I'm building a new machine with a X58A-UD7 (v.2), Intel 980x, Kingston HyperX (3x4GB @ 1600), OCZ Vertex 2 100GB), Win7 x64 Pro, and air-cooled with a Cooler Master Hyper 212+.

Can somebody please help me with suggested BIOS settings, and any other great ideas for improving my build? I've built many computers previously (40-70 approx) but this will be my first O.C. effort. Also, any help on how to set up my board signature would be great.

Thanks!
Welcome to OCN and the UD7 thread.
Your build looks good to me although I would get faster ram.
The front page has BIOS templates on it for you to look at, or try to ask a more specific question. Only thing I can offer at this time is you should shoot for between 4.0-4.5 GHz.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #1350 of 3829
Hi, my offer UD7 RAM for up to $ 200
Thanks in advance.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
INFO INFO INFO INFO 
Hard DriveOptical DriveOSMonitor
INFO INFO INFO INFO 
KeyboardPowerCaseMouse
INFO INFO INFO INFO 
Mouse Pad
INFO 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
INFO INFO INFO INFO 
Hard DriveOptical DriveOSMonitor
INFO INFO INFO INFO 
KeyboardPowerCaseMouse
INFO INFO INFO INFO 
Mouse Pad
INFO 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *