Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 158

post #1571 of 3829
Thread Starter 
all 930s and 950s are D0, early 920s were c0 and sucked, but then d0 920s came out and are very nice OCers.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1572 of 3829
Quote:
Originally Posted by UNOE View Post
I feel stupid now after stepping it up slowly I'm doing 4.0Ghz (174x23) on really low voltage. I was really way too high and overvolting. I'm now at
1.275vcore - 1.315v qpi/vtt - 1.62v ram, stable in Linx 25 plus minutes so far.

http://valid.canardpc.com/show_oc.php?id=1506429

Question off topic from the board. I see alot of talk about 'D0' for 920.
My Chip here says D0 but its a 950. Should I be happy ?
Trying to go from 4.0 to 4.1 - seems I have to increase the vcore to almost 1.35 and vtt to 1.35 just to not Bsod on any Linx runs. Don't know why ?
Above it was running so nicely and 1.275vcore volts at 4.0 but now it needs so much more volts just to step up 0.1Ghz
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1573 of 3829
Thread Starter 
yea most of the time over 4ghz needs an exponential instead of linear increase in vcore
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1574 of 3829
Quote:
Originally Posted by techenth View Post
aloke i dont see any reason to lose any data if you set raid mode in backup bios too.
Doesn't the backup BIOS in the DualBIOS have just factory defaults in it?
I'm going by
http://www.gigabyte.com/microsite/55...6_dualbios.htm
and the Manual page 72, which says:
"What is DualBIOSâ„¢?
Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and a backup BIOS. Normally, the system works on the main BIOS. However, if the main BIOS is corrupted or damaged, the backup BIOS will take over on the next system boot and copy the BIOS file to the main BIOS to ensure normal system operation. For the sake of system safety, users cannot update the backup BIOS manually."

Thus, if I have to re-define the RAID in the BIOS, will it still maintain the data?

Aloke
PS: All this idle time is making me paranoid. I hope my system gets here soon so that I can get busy instead of reading the manual
post #1575 of 3829
Quote:
Originally Posted by Sin0822 View Post
Wait what bios? GOOC is only for rev 2.0 UD7?
Yes, I don't want to loose the GOO but if they ship a Rev 1, so be it.
Quote:
Originally Posted by alokep View Post
Doesn't the backup BIOS in the DualBIOS have just factory defaults in it?
I'm going by
http://www.gigabyte.com/microsite/55...6_dualbios.htm
and the Manual page 72, which says:
"What is DualBIOSâ„¢?
Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and a backup BIOS. Normally, the system works on the main BIOS. However, if the main BIOS is corrupted or damaged, the backup BIOS will take over on the next system boot and copy the BIOS file to the main BIOS to ensure normal system operation. For the sake of system safety, users cannot update the backup BIOS manually."

Thus, if I have to re-define the RAID in the BIOS, will it still maintain the data?

Aloke
PS: All this idle time is making me paranoid. I hope my system gets here soon so that I can get busy instead of reading the manual
The dual BIOS is not that complicated. If your overclock is way off the backup BIOS will just default everything back to stock settings.

If something happens and you loose your RAID you may just have to rebuild it or re-do the settings.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #1576 of 3829
About the whole RAID thing you wont have any problems. I switched my P55A-UDP4 board to a X58A-UD5 last week. I had two RAID zero Arrays. On my old board. I switched many parts RAM, CPU, Board... ect. and plugged in my drives from my old system and booted straight to windows after enableing RAID in Bios. Its not a big deal. I didn't even plug my Drives in the same slot order. But they where connected to the White ports from both boards. I had the question if I would loose my RAID array when switching boards so just in case I backed it all up. But it wasn't needed. The array was detected. Even named the same and was disk0 and disk1 where same order. I can't tell you how it worked that way but it did.
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1577 of 3829
Still working on the OC getting closer I think. Let me know your thoughts.

181x23 (4.16Ghz) -
7-7-7-24-1t Timing (1448Mhz)
1 hour Linx stable
3 plus hours Prime95 Blend stable
Temp 44c to 83c
Vcore = 1.3625
qpi/vtt = 1.395
DRAM = 1.64


http://valid.canardpc.com/show_oc.php?id=1507896

First Question : I'm kind of confused on the uncore and qpi muiltiplyer. I wanna get a max optimal overclock. What should a qpi and uncore frequency be to run equal to the ram and what not? If I lower it will I be able to push my OC further ?

Second Question : My last core is usually 3 to 6 degrees cooler than the other three cores. Should I reapply my heatsink ?
LL
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1578 of 3829
Quote:
Originally Posted by UNOE View Post
Still working on the OC getting closer I think. Let me know your thoughts.

181x23 (4.16Ghz) -
7-7-7-24-1t Timing (1448Mhz)
1 hour Linx stable
3 plus hours Prime95 Blend stable
Temp 44c to 83c
Vcore = 1.3625
qpi/vtt = 1.395
DRAM = 1.64


http://valid.canardpc.com/show_oc.php?id=1507896

First Question : I'm kind of confused on the uncore and qpi muiltiplyer. I wanna get a max optimal overclock. What should a qpi and uncore frequency be to run equal to the ram and what not? If I lower it will I be able to push my OC further ?

Second Question : My last core is usually 3 to 6 degrees cooler than the other three cores. Should I reapply my heatsink ?
Temps are getting a little high, I don't think I would take it any higher.

I would test a few diff setups to see what runs the best with your hardware. But I would try and run the uncore as high as possible

Temps will always very on each core. I had a quad that had almost an 8 degree temp difference. I changed TIM a few times to make sure.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #1579 of 3829
Hi i added my details into the google spreasheet as you asked here:

http://www.overclock.net/intel-mothe...l#post11418377

Can i be added to members bios settings on page 1,pwease
Le Box of Black
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 Gigabyte X58A-UD7 r2.0 GTX 770 16GB Corsair Vengeance in Triple channel mode ;) 
Hard DriveHard DriveHard DriveHard Drive
Ocz Vertex 2  Samsung F1  Samsung F3 Samsung F1 
Optical DriveOSMonitorKeyboard
Sammie Dvd rw Windows 7 64Bit HZ281HPB 1200p / HP IPS 1080p / Samsung Syncmas... Qpad MK80 (Blue switch), SteelSeries 7G (Cherry... 
PowerCaseMouseMouse Pad
HX1000 CM-Stacker 832 Flipped Naos 3200,G5,G400,G400s, G300, Kone+ Razor Destructor and Steelseries Qck 
AudioAudioAudio
X-Fi Fatal1ty  ATH-T500 / AH-D510 Samson CO1U PAK Condenser Mic  
  hide details  
Reply
Le Box of Black
(19 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 Gigabyte X58A-UD7 r2.0 GTX 770 16GB Corsair Vengeance in Triple channel mode ;) 
Hard DriveHard DriveHard DriveHard Drive
Ocz Vertex 2  Samsung F1  Samsung F3 Samsung F1 
Optical DriveOSMonitorKeyboard
Sammie Dvd rw Windows 7 64Bit HZ281HPB 1200p / HP IPS 1080p / Samsung Syncmas... Qpad MK80 (Blue switch), SteelSeries 7G (Cherry... 
PowerCaseMouseMouse Pad
HX1000 CM-Stacker 832 Flipped Naos 3200,G5,G400,G400s, G300, Kone+ Razor Destructor and Steelseries Qck 
AudioAudioAudio
X-Fi Fatal1ty  ATH-T500 / AH-D510 Samson CO1U PAK Condenser Mic  
  hide details  
Reply
post #1580 of 3829
Thread Starter 
ill see what i was going to do, i was actually going to remove that as its redundant.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *