Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 177

post #1761 of 3831
Thread Starter 
Quote:
Originally Posted by UNOE View Post
Thanks ... The thing is I would really want it too run at x16 on both cards I know it's only like 1% different between x16 to x8 but I have 570 and the difference could be as much as 3%. So I would hope it would stay as x16 1% is nothing but I just like to optimize to the tee.
it is a very small difference, this was my responce. Lucky for you its daytime in Taipei

Quote:
product manual stresses the importance of installing video card in

the x16,1 slot yet I installed mine in the x16,2 slot and haven't

noticed any difference in performance. Should I be concerned ??"
No Need to worry. Obviously, the slots that are closer to the CPU might have very slight performance advantage, as signal has less distance to travel, but both slots will work and provide x16 bandwidth.


Quote:
Also

have a question about the pice slots. I would really like to install a

SLI setup with only 8x,1 slot and 8x,2 slot so I could put custom heat

sinks on both GPU cards.... for spacing wise this would be best for

me... but if nothing is installed in any of the x16 slots and two

cards were installed into the x8 slots's would the x8 slots revert to

x16 speed? It says that they share bandwidth so I don't see why they

wouldn't revert to x16 if the other was empty. This is just a thought.

Waiting for someone that knows this board to correct my ideas with the

facts."
You can plug 2 cards into the x8 slots and they will work, but your bandwidth will be limited to x8 for each card. The X8 slots can only physically provide x8 bandwidth (if you look closely inside the x8 slot, even though physically it looks like a x16 slot, it only has pins for x8).
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1762 of 3831
Wow I did not see this thread so I made my own. Whoops...

Could anyone help me with my x58a problem? http://www.overclock.net/intel-mothe...ctivating.html
Ferluci
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 950 @ 4.2Ghz 1.39v Gigabyte GA-X58A-UD5 Rev 2.0 MSI "N460GTX" 1 GB HAWK "Talon Attack" Corsair Dominator 12 GB (3x4) 1600Mhz 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 2 60 GBx2 None Windows 7, OS X 10.6.5 HP 
PowerCase
Antec CP850 850W Antec Performance One 83 (P183) 
  hide details  
Reply
Ferluci
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 950 @ 4.2Ghz 1.39v Gigabyte GA-X58A-UD5 Rev 2.0 MSI "N460GTX" 1 GB HAWK "Talon Attack" Corsair Dominator 12 GB (3x4) 1600Mhz 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 2 60 GBx2 None Windows 7, OS X 10.6.5 HP 
PowerCase
Antec CP850 850W Antec Performance One 83 (P183) 
  hide details  
Reply
post #1763 of 3831
Thread Starter 
i just posted in your thread.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1764 of 3831
Quote:
Originally Posted by Sin0822 View Post
it is a very small difference, this was my response. Lucky for you its daytime in Taipei



No Need to worry. Obviously, the slots that are closer to the CPU might have very slight performance advantage, as signal has less distance to travel, but both slots will work and provide x16 bandwidth.




You can plug 2 cards into the x8 slots and they will work, but your bandwidth will be limited to x8 for each card. The X8 slots can only physically provide x8 bandwidth (if you look closely inside the x8 slot, even though physically it looks like a x16 slot, it only has pins for x8).
Awesome, I vote this the best thread .... thanks again
Edited by UNOE - 12/21/10 at 9:14pm
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1765 of 3831
Thread Starter 
No problem, thanks Gigabyte HQ. i can't get answers like that all the time, but if you stump me i will ask.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #1766 of 3831
No Need to worry. Obviously, the slots that are closer to the CPU might have very slight performance advantage, as signal has less distance to travel, but both slots will work and provide x16 bandwidth.



Its funny if its only 1%-3% difference between x16 x8. I wonder the difference between x16,1 and x16,2 LOL. Seriously, It like 2 inches further. I found that amusing that that is the reason the manual says to use x16,1 only. But hey maybe thats why they are gigabyte and thats what I buy cause the attention to detail is appreciated by me, pretty cool actually.
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1767 of 3831
anyone know to do the mail-in rebate do I have to cut the whole label off with the serial and everything or just the bar code..

[edit] Nevermind figured it out -- serial number and product name and bar code hate rebates
Edited by UNOE - 12/21/10 at 9:50pm
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1768 of 3831
Anyone know what the max speed ram the X58A-UD5 rev 1.0 Can take? (i cant load gigabyte page for some reason) Was thinking about getting 2000mhz replacement to my 1600mhz
Plus need to factor in that i am running a 980x cpu, It only supports "1066"mhz ddr3 apparently so i think im kinda pushing it with my 12gb @ 1600mhz.
I have no clue with what the IMC on the 980x can take.. If i had a 920cpu i would just flog the crap out of it.
Clevo P150EM
(12 items)
 
Dell Vostro 1500
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3820QM P15xEMx Nvidia GTX 680M Samsung 16GB *4x 4GB @ 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial M4-CT256M4SSD3 ST9750420AS Windows 7 x64 Ultimate 15.6" FHD 1920x1080 LED / LCD 95% Gamut Matte 
MonitorPowerCaseMouse
Samsung SA850T 27" PLS 2560x1440 via DP 180W AC Adapter Clevo P150EM Touchpad 
CPUMotherboardGraphicsRAM
Intel Mobile Core 2 Duo T7500 Dell - WY041 NVIDIA GeForce 8600M GT  Samsung 3GB Total 667mhz 
RAMHard DriveOptical DriveCooling
Samsung  WDScorpio Black WD3200BEKT 320G DVD+RW Yellow Pages 
OSMonitorPowerCase
Windows 7 32Bit Ultimate 15.5" WSXGA+1680x1050 with TrueLife 90W AC Adapter Vostro 1500 
Mouse
Touchpad 
  hide details  
Reply
Clevo P150EM
(12 items)
 
Dell Vostro 1500
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3820QM P15xEMx Nvidia GTX 680M Samsung 16GB *4x 4GB @ 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial M4-CT256M4SSD3 ST9750420AS Windows 7 x64 Ultimate 15.6" FHD 1920x1080 LED / LCD 95% Gamut Matte 
MonitorPowerCaseMouse
Samsung SA850T 27" PLS 2560x1440 via DP 180W AC Adapter Clevo P150EM Touchpad 
CPUMotherboardGraphicsRAM
Intel Mobile Core 2 Duo T7500 Dell - WY041 NVIDIA GeForce 8600M GT  Samsung 3GB Total 667mhz 
RAMHard DriveOptical DriveCooling
Samsung  WDScorpio Black WD3200BEKT 320G DVD+RW Yellow Pages 
OSMonitorPowerCase
Windows 7 32Bit Ultimate 15.5" WSXGA+1680x1050 with TrueLife 90W AC Adapter Vostro 1500 
Mouse
Touchpad 
  hide details  
Reply
post #1769 of 3831
Quote:
Originally Posted by SadistBlinx View Post
Anyone know what the max speed ram the X58A-UD5 rev 1.0 Can take? (i cant load gigabyte page for some reason) Was thinking about getting 2000mhz replacement to my 1600mhz
Plus need to factor in that i am running a 980x cpu, It only supports "1066"mhz ddr3 apparently so i think im kinda pushing it with my 12gb @ 1600mhz.
I have no clue with what the IMC on the 980x can take.. If i had a 920cpu i would just flog the crap out of it.
You won't notice it in anything. Even the benching you will see less then a quarter of a percent difference ... I say save your money. Look at good timing ram...

specs say this - DDR3 2200/1333/1066/800
you also have to overclock to get those speeds... meaning you have to have a high clock... cause the memory muilt doesn't push that high ... x10 I think is max so I think you have to have atless a 200 bclk to get too 2000mhz ram speeds... someone correct me if I'm wrong
Edited by UNOE - 12/22/10 at 12:24am
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #1770 of 3831
Quote:
Originally Posted by UNOE View Post
You won't notice it in anything. Even the benching you will see less then a quarter of a percent difference ... I say save your money. Look at good timing ram...

specs say this - DDR3 2200/1333/1066/800
you also have to overclock to get those speeds... meaning you have to have a high clock... cause the memory muilt doesn't push that high ... x10 I think is max so I think you have to have atless a 200 bclk to get too 2000mhz ram speeds... someone correct me if I'm wrong
In my bios settings i can select any clock speed for my ram currently (1600, 1333, 1066 etc), im just worryd about the IMC on the cpu i don't think i have to raise bclk to sync a 2000mhz set because i can just mess around with the multipliers because its all unlocked in my bios (correct me if im wrong) i know little about system Memory and appreciate any input in regards to it. I'm more of a gpu hardware guy
Clevo P150EM
(12 items)
 
Dell Vostro 1500
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3820QM P15xEMx Nvidia GTX 680M Samsung 16GB *4x 4GB @ 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial M4-CT256M4SSD3 ST9750420AS Windows 7 x64 Ultimate 15.6" FHD 1920x1080 LED / LCD 95% Gamut Matte 
MonitorPowerCaseMouse
Samsung SA850T 27" PLS 2560x1440 via DP 180W AC Adapter Clevo P150EM Touchpad 
CPUMotherboardGraphicsRAM
Intel Mobile Core 2 Duo T7500 Dell - WY041 NVIDIA GeForce 8600M GT  Samsung 3GB Total 667mhz 
RAMHard DriveOptical DriveCooling
Samsung  WDScorpio Black WD3200BEKT 320G DVD+RW Yellow Pages 
OSMonitorPowerCase
Windows 7 32Bit Ultimate 15.5" WSXGA+1680x1050 with TrueLife 90W AC Adapter Vostro 1500 
Mouse
Touchpad 
  hide details  
Reply
Clevo P150EM
(12 items)
 
Dell Vostro 1500
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3820QM P15xEMx Nvidia GTX 680M Samsung 16GB *4x 4GB @ 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial M4-CT256M4SSD3 ST9750420AS Windows 7 x64 Ultimate 15.6" FHD 1920x1080 LED / LCD 95% Gamut Matte 
MonitorPowerCaseMouse
Samsung SA850T 27" PLS 2560x1440 via DP 180W AC Adapter Clevo P150EM Touchpad 
CPUMotherboardGraphicsRAM
Intel Mobile Core 2 Duo T7500 Dell - WY041 NVIDIA GeForce 8600M GT  Samsung 3GB Total 667mhz 
RAMHard DriveOptical DriveCooling
Samsung  WDScorpio Black WD3200BEKT 320G DVD+RW Yellow Pages 
OSMonitorPowerCase
Windows 7 32Bit Ultimate 15.5" WSXGA+1680x1050 with TrueLife 90W AC Adapter Vostro 1500 
Mouse
Touchpad 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *