Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 202

post #2011 of 3279
1/10/11 at 4:47pm
Quote:
Originally Posted by krunch View Post
Hi guys this is what i have from the help of Kinger, I toned it back a little but there is a little room left.



Uploaded with ImageShack.us
Yikes! thats pretty high voltage for a 4ghz overclock,is it bad chip or something?
Le Box of Black
(19 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 Gigabyte X58A-UD7 r2.0 GTX 480 16GB Corsair Vengeance in Triple channel mode ;) 
Hard DriveHard DriveHard DriveHard Drive
Ocz Vertex 2  Samsung F1  Samsung F3 Seagate Barracuda 
Optical DriveOSMonitorKeyboard
Sammie Dvd rw W7-64bit-SP1 PLP 3968x1280 Samsung/Hanns G/Samsung Qpad MK80 (Blue switch), ZM-K500 (Red switch), ... 
PowerCaseMouseMouse Pad
Corsair 1000W HX PSU CM-Stacker 832 Flipped Naos 3200 and G400 (no prediction) Razor Destructor and Steelseries Qck 
AudioAudioAudio
X-Fi Fatal1ty  ATH-T500 / AH-D510 Samson CO1U PAK Condenser Mic  
View all
  hide details  
Reply
Le Box of Black
(19 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 Gigabyte X58A-UD7 r2.0 GTX 480 16GB Corsair Vengeance in Triple channel mode ;) 
Hard DriveHard DriveHard DriveHard Drive
Ocz Vertex 2  Samsung F1  Samsung F3 Seagate Barracuda 
Optical DriveOSMonitorKeyboard
Sammie Dvd rw W7-64bit-SP1 PLP 3968x1280 Samsung/Hanns G/Samsung Qpad MK80 (Blue switch), ZM-K500 (Red switch), ... 
PowerCaseMouseMouse Pad
Corsair 1000W HX PSU CM-Stacker 832 Flipped Naos 3200 and G400 (no prediction) Razor Destructor and Steelseries Qck 
AudioAudioAudio
X-Fi Fatal1ty  ATH-T500 / AH-D510 Samson CO1U PAK Condenser Mic  
View all
  hide details  
Reply

Gear mentioned in this thread:

post #2012 of 3279
1/10/11 at 5:41pm
Quote:
Originally Posted by superj1977 View Post
Yikes! thats pretty high voltage for a 4ghz overclock,is it bad chip or something?

Is it really? I am totally new at ocing so help me out a little and explain what you mean and what can I do to make it better..
Reply
Reply
post #2013 of 3279
1/10/11 at 5:59pm
Well... update on my bios


Code:
GIGABYTE GA-X58A-UD5 Rev. 1

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 21x
CPU Frequency ........................(GHz): 4,40GHz
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Disabled 
CPU Cores Enabled..........................: All
CPU Multi Threading........................: Disabled
CPU Enhanced Halt (C1E)....................: Enabled
C3/C6/C7 State Support.....................: Enabled
CPU Thermal Monitor........................: Auto
CPU EIST Function..........................: Enabled
Bi-Directional PROCHOT.....................: Auto

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 7.560GHz
Uncore Clock Ratio.........................: x17
Uncore Frequency......................(MHz): 3800MHz

>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled 
BCLK Frequency(MHz)........................: 210
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8.0
Memory Frequency(MHz)......................: 1680
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................:  800mV
PCI Express Clock Drive (mV)...............: 900mV
CPU Clock Skew (ps)........................: 0ps
IOH Clock Skew (ps)........................: 0ps

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled 
System Memory Multiplier (SPD).............: 8.0
Memory Frequency(MHz)......................: 1680
Performance Enhance........................: Turbo
DRAM Timing Selectable (SPD)...............: Quick
Profile DDR Voltage........................: n/a
Profile QPI Voltage........................: n/a
Channel Interleaving.......................: 6 
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 8
tRCD.......................................: 8
tRP........................................: 8
tRAS.......................................: 24
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: Auto
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1 
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: Auto
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................: 6
Different Ranks............................: 5
On The Same Rank...........................: 1 
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: 6
Different Ranks............................: 6
On The Same Rank...........................: 1

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: Level 2 
CPU Vcore..................................: 1.36875V
xDynamic Vcore(DVID).......................: Auto
QPI/VTT Voltage............................: 1.335v
CPU PLL....................................: 1.500V
>>> MCH/ICH
PCIE.......................................: 1.500V
QPI PLL....................................: 1.200V
IOH Core...................................: 1.140V
ICH I/O....................................: 1.500V
ICH Core...................................: 1.140V
>>> Dram
DRAM Voltage...............................: 1.640V
DRAM Termination...........................: Auto
Ch-A Data VRef.............................: Auto
Ch-B Data VRef.............................: Auto
Ch-C Data VRef.............................: Auto
Ch-A Address VRef..........................: Auto
Ch-B Address VRef..........................: Auto
Ch-C Address VRef..........................: Auto

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Disabled
Along with the validation
http://valid.canardpc.com/show_oc.php?id=1587349


Ahhh... really nice! Max temps so far, after 20 passes of Linx, 68ºC
Edited by Pedros - 1/10/11 at 6:02pm
The Hive
(16 items)
  		  
CPUMotherboardGraphicsRAM
Intel 3570k MSI Z77 MPower MSI 7970 Lightning 8Gb Samsung MV-3V4G3D/US 
Hard DriveHard DriveCoolingOS
Samsung 840 Pro Western Digital Black Caviar GTX 360 Radiator, Ultra Kaze 3000rpm x 6, EK Su... Windows 7 Professional 
MonitorKeyboardPowerCase
Dell U2410 Merc Stealth Corsair HX1000 Dimas Bench 
MouseMouse PadAudioAudio
Cyborg R.A.T.7 Razer Destructor Creative Labs Titanium HD Corsair SP2500 
View all
  hide details  
Reply
The Hive
(16 items)
  		  
CPUMotherboardGraphicsRAM
Intel 3570k MSI Z77 MPower MSI 7970 Lightning 8Gb Samsung MV-3V4G3D/US 
Hard DriveHard DriveCoolingOS
Samsung 840 Pro Western Digital Black Caviar GTX 360 Radiator, Ultra Kaze 3000rpm x 6, EK Su... Windows 7 Professional 
MonitorKeyboardPowerCase
Dell U2410 Merc Stealth Corsair HX1000 Dimas Bench 
MouseMouse PadAudioAudio
Cyborg R.A.T.7 Razer Destructor Creative Labs Titanium HD Corsair SP2500 
View all
  hide details  
Reply
post #2014 of 3279
1/10/11 at 7:35pm
I used this guide as a foundation to oc my Core i7 950: http://www.techreaction.net/2010/09/...nd-gulftown/4/

It wants quite a bit more Vcore to get to 4Ghz. I have only messed with a few settings, but I'm thinking I should change some other stuff as well. Any suggestions?

Code:
GIGABYTE GA-X58A-UD3R (rev. 2)

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................:20
CPU Frequency ........................(GHz):3.8Ghz
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................:Disabled 
CPU Cores Enabled..........................:All
CPU Multi Threading........................:Enabled
CPU Enhanced Halt (C1E)....................:Disabled
C3/C6/C7 State Support.....................:Disabled
CPU Thermal Monitor........................:Enabled
CPU EIST Function..........................:Disabled
Bi-Directional PROCHOT.....................:Disabled

QPI Clock Ratio............................:x36
QPI Link Speed........................(GHz):6.84Ghz
Uncore Clock Ratio.........................:x16
Uncore Frequency......................(MHz):3040Mhz
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................:Enabled
BCLK Frequency(MHz)........................:190
Extreme Memory Profile(X.M.P.).............:Disabled
System Memory Multiplier (SPD).............:8
Memory Frequency(MHz)......................:1520
PCI Express Frequency(MHz).................:100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................:800mV
PCI Express Clock Drive (mV)...............:900mV
CPU Clock Skew (ps)........................:0ps
IOH Clock Skew (ps)........................:0ps

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............:Disabled
System Memory Multiplier (SPD).............:8
Memory Frequency(MHz)......................:1520Mhz
Performance Enhance........................:Turbo
DRAM Timing Selectable (SPD)...............:Quick
Profile DDR Voltage........................:n/a
Profile QPI Voltage........................:n/a
Channel Interleaving.......................:6
Rank Interleaving..........................:4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................:9
tRCD.......................................:9
tRP........................................:9
tRAS.......................................:24
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: Auto
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1 

>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................:Auto
Round Trip Latency.........................:Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................:Auto
Different Ranks............................:Auto
On The Same Rank...........................:Auto
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................:Auto
Different Ranks............................:Auto
On The Same Rank...........................:Auto

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................:Level 2
CPU Vcore..................................:1.3v
xDynamic Vcore(DVID).......................:n/a
QPI/VTT Voltage............................:1.235v
CPU PLL....................................:Auto
>>> MCH/ICH
PCIE.......................................:Auto
QPI PLL....................................:Auto
IOH Core...................................:1.1v
ICH I/O....................................:Auto
ICH Core...................................:Auto
>>> Dram
DRAM Voltage...............................: 1.660V
DRAM Termination...........................: Auto
Ch-A Data VRef.............................: Auto
Ch-B Data VRef.............................: Auto
Ch-C Data VRef.............................: Auto
Ch-A Address VRef..........................: Auto
Ch-B Address VRef..........................: Auto
Ch-C Address VRef..........................: Auto

> Miscellaneous Settings [Press Enter]

Isochronous Support........................:Enabled
Virtualization Technology..................:Enabled

GOOC 2010 WWF Rev.2 Settings Only

GOOC Lean Mode.............................:n/a
GOOC extreme clock.........................:n/a
GOOC extreme temp..........................:

Edited by Cool Blaze - 1/10/11 at 7:39pm
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
Core i7 950 @ 3.8Ghz; 1.28v (3035B714) X58A-UD3R rev. 2 XFX Radeon HD 5850 Corsiar XMS3 (3x2GB) 1600 Mhz 9-9-9-24 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 4 SATA III Samsung 1TB 7200RPM SATA 3.0Gb/s Liteon 24x SATA Thermalright Venomous X 
OSMonitorMonitorPower
Window 7 Ultimate x64 Sceptre 24" (16:10) ASUS 24" LED 1080p Corsair HX 750 W 
Case
Thermaltake Armor+ 
View all
  hide details  
Reply
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
Core i7 950 @ 3.8Ghz; 1.28v (3035B714) X58A-UD3R rev. 2 XFX Radeon HD 5850 Corsiar XMS3 (3x2GB) 1600 Mhz 9-9-9-24 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 4 SATA III Samsung 1TB 7200RPM SATA 3.0Gb/s Liteon 24x SATA Thermalright Venomous X 
OSMonitorMonitorPower
Window 7 Ultimate x64 Sceptre 24" (16:10) ASUS 24" LED 1080p Corsair HX 750 W 
Case
Thermaltake Armor+ 
View all
  hide details  
Reply
post #2015 of 3279
1/10/11 at 8:25pm
Quote:
Originally Posted by alancsalt View Post
I retested all my Oc settings against that auto idea, and found that all I really had was an unexplained temperature drop that has nothing to do with auto, so I've just made an ass of myself.
Nah, I wouldn't say that.. You are just thorough and wanted to find out if there was really something to it, that's all. It's this level of willingness to investigate that ensures you are having so much success with you amazing clocks!

Thanks again everyone for all the help and advice, really appreciate it!

Just corrected a few typos in my bios settings chart, do I have to submit it for it to be listed with all the rest or is someone doing that for us? If so, note that the link for the blank template was apparently down yesterday..

O and O Kirkman
GA-X58A-UD5
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7-950 GA-x58A-UD5 Rev 2.0 Zotac GeForce GTX 470 12 Gig GSkill Triple Channel F3-12800CL7T-6GBPI 
Hard DriveOSPowerCase
CRUCIAL M4 SATA 3 Win 7 64 Corsair CMPSU-850TX 850W Antec 900 
View all
  hide details  
Reply
GA-X58A-UD5
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7-950 GA-x58A-UD5 Rev 2.0 Zotac GeForce GTX 470 12 Gig GSkill Triple Channel F3-12800CL7T-6GBPI 
Hard DriveOSPowerCase
CRUCIAL M4 SATA 3 Win 7 64 Corsair CMPSU-850TX 850W Antec 900 
View all
  hide details  
Reply
post #2016 of 3279
1/11/11 at 3:51am
Quote:
Originally Posted by kirkman View Post
Nah, I wouldn't say that.. You are just thorough and wanted to find out if there was really something to it, that's all. It's this level of willingness to investigate that ensures you are having so much success with you amazing clocks!

Thanks again everyone for all the help and advice, really appreciate it!

Just corrected a few typos in my bios settings chart, do I have to submit it for it to be listed with all the rest or is someone doing that for us? If so, note that the link for the blank template was apparently down yesterday..

O and O Kirkman
You should be able to edit it yourself now, I just tested the spreadsheet.
The HedgeHog
(15 items)
  		  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
View all
  hide details  
Reply
The HedgeHog
(15 items)
  		  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
View all
  hide details  
Reply
post #2017 of 3279
1/11/11 at 8:34pm
@ guru i hit a 220 wall can not even boot
max pcie on this thing is 103 can hit any ideas?
Strength!
(14 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7-970 @ 4.6 HT 23x200 36x/16x | 8.0 Gigabyte X58A-UD3R Rev 2 XFX 7970 BE Ref 12GB DDR3-1600 Patriot Viper Extreme  
Hard DriveCoolingOSMonitor
3 Way Raid 0 Crucial M4 Swiftech H20-320 - 3 Panaflo 120x38mm @ 2000 rpm  Windows 7 Pro. H233H 
KeyboardPowerCaseMouse
Ducky DK9008-G2 Tiger Year Edition TX750W 800D Logitech G5 
View all
  hide details  
Reply
Strength!
(14 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7-970 @ 4.6 HT 23x200 36x/16x | 8.0 Gigabyte X58A-UD3R Rev 2 XFX 7970 BE Ref 12GB DDR3-1600 Patriot Viper Extreme  
Hard DriveCoolingOSMonitor
3 Way Raid 0 Crucial M4 Swiftech H20-320 - 3 Panaflo 120x38mm @ 2000 rpm  Windows 7 Pro. H233H 
KeyboardPowerCaseMouse
Ducky DK9008-G2 Tiger Year Edition TX750W 800D Logitech G5 
View all
  hide details  
Reply
post #2018 of 3279
1/11/11 at 9:02pm
  • Joined: Oct 2009
  • Location: Burbs of Detroit
  • Posts: 4,747
  • Reviews: 1
  • Trader Rating: 88
  • Folding Team Rank: 3,401
  •  
    Name Team Rank Points / Jun Work Units / Jun
    XtremeCuztoms 3,401 98,452 / 0 68 / 0
    A member of the Overclock.net HWBot Team    
  • Select All Posts By This User
Quote:
Originally Posted by freakb18c1 View Post
@ guru i hit a 220 wall can not even boot
max pcie on this thing is 103 can hit any ideas?
freeze it and the wall will be gone. problem solved.
just a bunch of junk
(13 items)
  		  
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
View all
  hide details  
Reply
just a bunch of junk
(13 items)
  		  
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
View all
  hide details  
Reply
post #2019 of 3279
1/11/11 at 9:04pm
Quote:
Originally Posted by XtremeCuztoms View Post
freeze it and the wall will be gone. problem solved.
you and your damn dice ;D
not a heat issue
Strength!
(14 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7-970 @ 4.6 HT 23x200 36x/16x | 8.0 Gigabyte X58A-UD3R Rev 2 XFX 7970 BE Ref 12GB DDR3-1600 Patriot Viper Extreme  
Hard DriveCoolingOSMonitor
3 Way Raid 0 Crucial M4 Swiftech H20-320 - 3 Panaflo 120x38mm @ 2000 rpm  Windows 7 Pro. H233H 
KeyboardPowerCaseMouse
Ducky DK9008-G2 Tiger Year Edition TX750W 800D Logitech G5 
View all
  hide details  
Reply
Strength!
(14 items)
  		  
CPUMotherboardGraphicsRAM
Intel Core i7-970 @ 4.6 HT 23x200 36x/16x | 8.0 Gigabyte X58A-UD3R Rev 2 XFX 7970 BE Ref 12GB DDR3-1600 Patriot Viper Extreme  
Hard DriveCoolingOSMonitor
3 Way Raid 0 Crucial M4 Swiftech H20-320 - 3 Panaflo 120x38mm @ 2000 rpm  Windows 7 Pro. H233H 
KeyboardPowerCaseMouse
Ducky DK9008-G2 Tiger Year Edition TX750W 800D Logitech G5 
View all
  hide details  
Reply
post #2020 of 3279
1/11/11 at 9:11pm
  • Joined: Oct 2009
  • Location: Burbs of Detroit
  • Posts: 4,747
  • Reviews: 1
  • Trader Rating: 88
  • Folding Team Rank: 3,401
  •  
    Name Team Rank Points / Jun Work Units / Jun
    XtremeCuztoms 3,401 98,452 / 0 68 / 0
    A member of the Overclock.net HWBot Team    
  • Select All Posts By This User
Quote:
Originally Posted by freakb18c1 View Post
you and your damn dice ;D
not a heat issue
doesn't need to be a heat issue... stuck at 220, add dice and with same settings wall is gone... with the same or less volts. i dont have any of my settings anymore for my old ud7 and 920 or i would pass em along... i got some good settings for a i5 750 or 760 and some for a Celeron
just a bunch of junk
(13 items)
  		  
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
View all
  hide details  
Reply
just a bunch of junk
(13 items)
  		  
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
View all
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *