Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 257

post #2561 of 3829
Quote:
Originally Posted by Att1cus;13178654 
Appreciate it man - just about as high as I can go with stability - I've got a mean heatsink (below) so i should be able to handle things over 4.0GHz at least.

np give me a few.


[php]GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 25x
CPU Frequency ........................(GHz): 4.00ghz 160x25
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Enabled
CPU Cores Enabled..........................: Enabled
CPU Multi Threading........................: Enabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Enabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Enabled

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 7.2 Ghz
Uncore Clock Ratio.........................: x17
Uncore Frequency......................(MHz): 3264 Mhz
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 160
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800mV
PCI Express Clock Drive (mV)...............: 800mV
CPU Clock Skew (ps)........................: 0ps
IOH Clock Skew (ps)........................: 0ps

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
Performance Enhance........................: Turbo
DRAM Timing Selectable (SPD)...............: Expert
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: Auto
Rank Interleaving..........................: Auto
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 9
tRCD.......................................: 9
tRP........................................: 9
tRAS.......................................: 24
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: Auto
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: Auto
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: level 1
CPU Vcore..................................: 1.2565
xDynamic Vcore(DVID).......................: Disabled
QPI/VTT Voltage............................: 1.200
CPU PLL....................................: 1.30
>>> MCH/ICH
PCIE.......................................: 1.50
QPI PLL....................................: 1.10
IOH Core...................................: 1.10
ICH I/O....................................: 1.50
ICH Core...................................: 1.10
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: Normal
Ch-A Data VRef.............................: Normal
Ch-B Data VRef.............................: Normal
Ch-C Data VRef.............................: Normal
Ch-A Address VRef..........................: Normal
Ch-B Address VRef..........................: Normal
Ch-C Address VRef..........................: Normal[/php]


if this fails to post. please set 1.8pll i tune all my chips on 1.3 - 1.6pll except the i7 930
edit make sure you run cas 9 timings
Edited by freakb18c1 - 4/18/11 at 3:13pm
post #2562 of 3829
Quote:
Originally Posted by freakb18c1;13178751 
np give me a few.


[php]GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 25x
CPU Frequency ........................(GHz): 4.00ghz 160x25
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Enabled
CPU Cores Enabled..........................: Enabled
CPU Multi Threading........................: Enabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Enabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Enabled

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 7.2 Ghz
Uncore Clock Ratio.........................: x17
Uncore Frequency......................(MHz): 3264 Mhz
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 160
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800mV
PCI Express Clock Drive (mV)...............: 800mV
CPU Clock Skew (ps)........................: 0ps
IOH Clock Skew (ps)........................: 0ps

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
Performance Enhance........................: Turbo
DRAM Timing Selectable (SPD)...............: Expert
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: Auto
Rank Interleaving..........................: Auto
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 9
tRCD.......................................: 9
tRP........................................: 9
tRAS.......................................: 24
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: Auto
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: Auto
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: level 1
CPU Vcore..................................: 1.2565
xDynamic Vcore(DVID).......................: Disabled
QPI/VTT Voltage............................: 1.200
CPU PLL....................................: 1.30
>>> MCH/ICH
PCIE.......................................: 1.50
QPI PLL....................................: 1.10
IOH Core...................................: 1.10
ICH I/O....................................: 1.50
ICH Core...................................: 1.10
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: Normal
Ch-A Data VRef.............................: Normal
Ch-B Data VRef.............................: Normal
Ch-C Data VRef.............................: Normal
Ch-A Address VRef..........................: Normal
Ch-B Address VRef..........................: Normal
Ch-C Address VRef..........................: Normal[/php]


if this fails to post. please set 1.8pll i tune all my chips on 1.3 - 1.6pll except the i7 930
edit make sure you run cas 9 timings

You use 1.3 pll ?
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2563 of 3829
1.3pll works on most 1366 cpu's some wont take it at all. the only one that i didnt work well on was the 930.

w3520's
most 920's
970/980
950
maybe 960 well see soon =X
post #2564 of 3829
Quote:
Originally Posted by freakb18c1;13180461 
1.3pll works on most 1366 cpu's some wont take it at all. the only one that i didnt work well on was the 930.

w3520's
most 920's
970/980
950
maybe 960 well see soon =X

Does this allow for lower voltage across the board ?

BTW
Everyone
Look at my loop. Its my first loop. I'm excited.
http://www.overclock.net/intel-build-logs/989359-my-700d-air-water-transformation-360-a.html
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2565 of 3829
Quote:
Originally Posted by superj1977;13174515 
BUMP,anyone know?
Sorry you got skipped over. I'm 99% sure it will fit but you could always ask the techs at MIPS.
Quote:
Originally Posted by UNOE;13176275 
Well Microcenter sold it to me. They change there extended coverage around september 2010. They new company microcenter uses insures it for things like bent pins, Overclocking, burnt chips, and ads 1 year to the warranty. I was sold when I heard that. I don't know if intel covers all of that if they do then I'm the fool I guess. This is only my second system build intended. and really my first extreme OC that I planned to do. So It gives me piece of mind that If I fry it I can drive 15min to microcenter and come back home with in the hour and continue abusing my board and chip. Also with Microcenter I saved almost $50 to $80 of what I would pay at say Newegg or other places. So $25 is less of worry.
But still do you think I'm safe running 1.5v on QPI if my Northbridge stays around 60c under load?
I had no idea they offered this! eek.gif I think I was so used to Best Buy offering it to me back in the day that I probably just instantly rejected MC when/if they even asked me about it. I think for $25 bucks it is worth it and can save you about three weeks that it would take Intel to RMA anyway. Great choice.thumb.gif
Quote:
Originally Posted by UNOE;13181033 
Does this allow for lower voltage across the board ?

BTW
Everyone
Look at my loop. Its my first loop. I'm excited.
http://www.overclock.net/intel-build-logs/989359-my-700d-air-water-transformation-360-a.html
Very, very nice build!
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #2566 of 3829
Quote:
Originally Posted by freakb18c1;13178751 
np give me a few.


[php]GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 25x
CPU Frequency ........................(GHz): 4.00ghz 160x25
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Enabled
CPU Cores Enabled..........................: Enabled
CPU Multi Threading........................: Enabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Enabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Enabled

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 7.2 Ghz
Uncore Clock Ratio.........................: x17
Uncore Frequency......................(MHz): 3264 Mhz
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 160
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800mV
PCI Express Clock Drive (mV)...............: 800mV
CPU Clock Skew (ps)........................: 0ps
IOH Clock Skew (ps)........................: 0ps

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
Performance Enhance........................: Turbo
DRAM Timing Selectable (SPD)...............: Expert
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: Auto
Rank Interleaving..........................: Auto
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 9
tRCD.......................................: 9
tRP........................................: 9
tRAS.......................................: 24
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: Auto
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: Auto
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: level 1
CPU Vcore..................................: 1.2565
xDynamic Vcore(DVID).......................: Disabled
QPI/VTT Voltage............................: 1.200
CPU PLL....................................: 1.30
>>> MCH/ICH
PCIE.......................................: 1.50
QPI PLL....................................: 1.10
IOH Core...................................: 1.10
ICH I/O....................................: 1.50
ICH Core...................................: 1.10
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: Normal
Ch-A Data VRef.............................: Normal
Ch-B Data VRef.............................: Normal
Ch-C Data VRef.............................: Normal
Ch-A Address VRef..........................: Normal
Ch-B Address VRef..........................: Normal
Ch-C Address VRef..........................: Normal[/php]


if this fails to post. please set 1.8pll i tune all my chips on 1.3 - 1.6pll except the i7 930
edit make sure you run cas 9 timings

No dice on this configuration either. Thanks for putting it together for me. Some of the numbers didn't work out for me either - like the QPi was 5.** with this setup, not 7.2 like this shows.

Do I use a not-so-common model i7? I can't seem to find good OCing for it anywhere.
Monolith
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3820 Asus Rampage IV Extreme EVGA GTX 680+ 4GB (04G-P4-2686-KR) 16GB Corsair Dominator Platinum 2400MHz 
Hard DriveHard DriveCoolingCooling
240GB OCZ RevoDrive3 X2 PCI-Express 2.0 SSD 1TB WD Caviar Black (WD1001FALS) Swiftech Apogee Drive II HEATKILLER® GPU-X³ GTX 680 "Hole Edition" Refer... 
CoolingCoolingCoolingCooling
Black Ice Xtreme III Radiator w/ Customizable F... Swiftech MCR220 "Quiet Power" Dual 120mm Radiat... FrozenQ Liquid Fusion Dual Bay Reservoir - Acry... Koolance QD3 Quick-Disconnect fittings for CPU ... 
CoolingOSMonitorKeyboard
Corsair SP120 Fans Windows 7 Ultimate x64 Dell U2713HM 27'' IPS Display Logitech G19 
PowerCaseMouseMouse Pad
Corsair AX1200 (1200 watt) NZXT Phantom 820 Logitech G700 Laser Gaming Mouse Razer Goliathus XL 
Audio
Creative Sound Blaster Z 
  hide details  
Reply
Monolith
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3820 Asus Rampage IV Extreme EVGA GTX 680+ 4GB (04G-P4-2686-KR) 16GB Corsair Dominator Platinum 2400MHz 
Hard DriveHard DriveCoolingCooling
240GB OCZ RevoDrive3 X2 PCI-Express 2.0 SSD 1TB WD Caviar Black (WD1001FALS) Swiftech Apogee Drive II HEATKILLER® GPU-X³ GTX 680 "Hole Edition" Refer... 
CoolingCoolingCoolingCooling
Black Ice Xtreme III Radiator w/ Customizable F... Swiftech MCR220 "Quiet Power" Dual 120mm Radiat... FrozenQ Liquid Fusion Dual Bay Reservoir - Acry... Koolance QD3 Quick-Disconnect fittings for CPU ... 
CoolingOSMonitorKeyboard
Corsair SP120 Fans Windows 7 Ultimate x64 Dell U2713HM 27'' IPS Display Logitech G19 
PowerCaseMouseMouse Pad
Corsair AX1200 (1200 watt) NZXT Phantom 820 Logitech G700 Laser Gaming Mouse Razer Goliathus XL 
Audio
Creative Sound Blaster Z 
  hide details  
Reply
post #2567 of 3829
Thread Starter 
that microcenter news is sick.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2568 of 3829
Quote:
Originally Posted by Att1cus;13182559 
No dice on this configuration either. Thanks for putting it together for me. Some of the numbers didn't work out for me either - like the QPi was 5.** with this setup, not 7.2 like this shows.

Do I use a not-so-common model i7? I can't seem to find good OCing for it anywhere.

ah thats to bad. guess you gonna have to shoot higher volts first then work your way down


try 1.300v cpu vcore and 1.295 qpi/ vtt (or something close to it)

good luck
post #2569 of 3829
Quote:
Originally Posted by NoGuru;13181381 

I had no idea they offered this! eek.gif I think I was so used to Best Buy offering it to me back in the day that I probably just instantly rejected MC when/if they even asked me about it. I think for $25 bucks it is worth it and can save you about three weeks that it would take Intel to RMA anyway. Great choice.thumb.gif

Very, very nice build!
thanks

But back to my question lol

'do you think I'm safe running 1.5v on QPI if my Northbridge stays around 60c under load?'
Edited by UNOE - 4/19/11 at 12:34am
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2570 of 3829
Quote:
Originally Posted by UNOE;13185512 
thanks

But back to my question lol

'do you think I'm safe running 1.5v on QPI if my Northbridge stays around 60c under load?'
Yeah, your probably fine. I have seen a few run higher then that 24/7.

Plus you have the sweet warranty so who cares, give er hell:thumb:
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *