Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 260

post #2591 of 3827
Quote:
Originally Posted by superj1977;13217323 
thanks man,looks to me very similar but i think i will email just to check.

Just asked here as its likely that if somebody knew,then this is the place to ask.

Cheers.
Yeah, they don't sell MIPS here so that is why you don't see many on this site.
I have owned a set for my EP45-UD3P and they are very good blocks.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #2592 of 3827
Its for sure not the drive just being dormant and spinning up, as it causes the whole system to lock up, permanently. And it isn't always on the same drive i'm finding now. The only thing in common is the controller. I've changed cables and done every bit of basic hardware troubleshooting that this would entail. Once or twice out of the dozen or so times this has happened I eventually get the normal: Display driver nvlddmkm stopped responding and has successfully recovered. That's why I thought it was the GPU and/or the video drivers but after swapping out the GPUs and how I came to find it had to do with Rapid Storage Technology (via my last post) I started looking at the SATA Controller. Here's what I tried:

I've tried it with two GTX 275s in SLI, without, a GTX 560 TI from my other PC, every Nvidia driver since they went passed ver. 200.00 (this has happened since I bought this board). I also had a buddy bring over an ATI 6970, still no dice. It only happens on the drives that are on the Intel SATA controller via the board in my system specs. The first two cards have 896 mb of RAM the second 1024 megs and the last 2 gigs. What i'll do is attach all the info on the PC and detailed info on the GPU and drives and what they are attached to below. All 4 HDDs are on the Intel Controller and the ODD is on the Gigabyte one, they are both in AHCI. This has happened when in RAID if I remember correctly. Bios FE5. No overclocking. I'm now trying that Intel Rapid Storage Technology software that I hate, but an Intel rep who was at work two days ago says it is much improved. He originally is the one that told me about the software conflicting with DXVA video filters so I took it off, this was in October I guess. And all was good for a while, but now its doing it again. As I wrote I usually extract the drivers using switches from the IRST software and then manually install the drivers alone. This time I just installed the software with the drivers...So far so good with the software, but i'd like to know *** is happening. Or if you guys have any ideas. After looking at the AIDA64 report on those particular drives should I have the IDE mode on the Intel Controller in Native or Legacy via the Bios?....Anyways here's both reports in txt format. One is just my system's summary in more detail than my signature. And the second is the detailed info on the GPU and HDDs, The Controllers, etc. I think this is all the info you'd need to get an idea of what i'm working with. Thanks guys, you all are always a big help here.

[ATTACH]206894[/ATTACH]

[ATTACH]206895[/ATTACH]
Edited by dvanderslice - 4/22/11 at 10:57am
My main PC
(14 items)
 
  
Reply
My main PC
(14 items)
 
  
Reply
post #2593 of 3827
Im working on a new OC around 4.4ghz, I'm trying to use the 24x multiplier is it worth trying to get this stable with 24x multiplier ? And also have a question about Load Line 1 & 2. I been using level 2 for my 4.2ghz clocks. But what Level is good for volts around 1.45 to 1.50. Should I bump it to Level 1 or turn it off with higher voltage or is it the other way around that I should have it on level 2 for higher voltages.
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2594 of 3827
Quote:
Originally Posted by UNOE;13238442 
Im working on a new OC around 4.4ghz, I'm trying to use the 24x multiplier is it worth trying to get this stable with 24x multiplier ? And also have a question about Load Line 1 & 2. I been using level 2 for my 4.2ghz clocks. But what Level is good for volts around 1.45 to 1.50. Should I bump it to Level 1 or turn it off with higher voltage or is it the other way around that I should have it on level 2 for higher voltages.

Its going to be very hard to get that tuned on 24x, even multipliers are always a pain to get stable. As far as levels of LLC, I personally use Level 1 up to about 1.48750 in bios. Which give cpu-z 1.456v idle and 1.440 load. If i have to use anymore volts I would enable Level 2. Level 2 @ 1.48750 in bios is 1.456 idle and 1.488 load, Which would be like having 1.531v @ Level 1.
Edited by freakb18c1 - 4/24/11 at 3:11pm
post #2595 of 3827
Thread Starter 
i got a new PB today under DICE with my OC board and my old 930.

almost 5ghz, but it wouldn't do it, i was more than pissed:
http://valid.canardpc.com/show_oc.php?id=1786303

stupid CPu hates anything over 1.6v for both qpi/vtt and vcore. BUT 990x tomorrow is different story! smile.gif

LN2 purchase tomorrow as well!
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2596 of 3827
Quote:
Originally Posted by freakb18c1;13255857 
Its going to be very hard to get that tuned on 24x, even multipliers are always a pain to get stable. As far as levels of LLC, I personally use Level 1 up to about 1.48750 in bios. Which give cpu-z 1.456v idle and 1.440 load. If i have to use anymore volts I would enable Level 2. Level 2 @ 1.48750 in bios is 1.456 idle and 1.488 load, Which would be like having 1.531v @ Level 1.

Cool thanks
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2597 of 3827
Quote:
Originally Posted by Sin0822;13260684 
i got a new PB today under DICE with my OC board and my old 930.

almost 5ghz, but it wouldn't do it, i was more than pissed:
http://valid.canardpc.com/show_oc.php?id=1786303

stupid CPu hates anything over 1.6v for both qpi/vtt and vcore. BUT 990x tomorrow is different story! smile.gif

LN2 purchase tomorrow as well!
Still a nice Validation. Gotta love that smoky plume after being out of the game for a while.
L2N+990=Fun, fun, fun!
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #2598 of 3827
I can honestly say that I never hit 5ghz on ANY of my cpu's. Does having DICE / LN2 really help that much?
post #2599 of 3827
Quote:
Originally Posted by KingT;13216111 
Damn these P45 mobos are hard to find for a right price..

But I managed to find a Gigabyte X58 UD9 brand new,3 years of warranty for just 330$ (here it usually costs over 800$)..

If there wasn't for SandyBridge temptation I would have bought it just like that..

For 1100$ I could get GA-X58 UD9, 6GB triple channel Kingston HyperX 2250MHz and Ci7 970 all brand new..

CHEERS..
Znaci jos se mislis? Pazi da te netko ne preduhitri. smile.gif

Too bad, I have feeling that X58 is almost on the edge since P67 popped up...
post #2600 of 3827
Quote:
Originally Posted by freakb18c1;13264590 
I can honestly say that I never hit 5ghz on ANY of my cpu's. Does having DICE / LN2 really help that much?
eek.gif Absolutely! The colder it is the easier it is to hit 5 or more.

I can have a CPU on air not boot at 4.40 GHz but using DICE just plug the settings in for 5 GHz and have it boot no problem. Of course the hardware has to cooperate as well.

You have had some good i7's that would hit about 5.3-5.5 on DICE and a little higher on L2N.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *