Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 285

post #2841 of 3829
Quote:
Originally Posted by ElGreco View Post
Eventhough my xmp says 1.65 qpi/vtt I lowered this value to the minimum stable which was 1.46v and of course this resulted to lower cpu temp as well...

Still in prime 95 with normal clock i get full load approx 75 deg C if i remember correctly.

Have you tried disabling c1 and eist from bios, for your cold start issue?

Check pm please...
Looks like this:

>>>Advanced CPU Core Features [Enter]

Intel(R) Turbo Boost Tech................Disabled
CPU Cores Enabled...........................ALL
CPU Multi Threading........................Enabled
CPU Enhanced Halt (C1E)................Disabled
C3/C6/C7 State Support....................Disabled
CPU Thermal Monitor.......................Disabled
CPU EIST Function...........................Disabled
Bi-Directional PROCHOT.................Enabled
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-920 HT 4.00GHz Gigabyte GA-X58A-UD7 Rev. 1 Gigabyte ATI Radeon 5870 CorsAir CMG6GX3M3A1866C7 - DOMINATOR GT 6GB (3x2GB 
Hard DriveOptical DriveOSMonitor
Seagate 500GB ES.2 SATA II 32MB Cache Sony SATA DVD Burner Windows 7 Ultimate 64bit Sansung P2350 
PowerCase
CorsAir CMPSU-1000XAU 1000W ATX Modular Power Supp Antec P193 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-920 HT 4.00GHz Gigabyte GA-X58A-UD7 Rev. 1 Gigabyte ATI Radeon 5870 CorsAir CMG6GX3M3A1866C7 - DOMINATOR GT 6GB (3x2GB 
Hard DriveOptical DriveOSMonitor
Seagate 500GB ES.2 SATA II 32MB Cache Sony SATA DVD Burner Windows 7 Ultimate 64bit Sansung P2350 
PowerCase
CorsAir CMPSU-1000XAU 1000W ATX Modular Power Supp Antec P193 
  hide details  
Reply
post #2842 of 3829
Quote:
Originally Posted by ElGreco View Post
Eventhough my xmp says 1.65 qpi/vtt I lowered this value to the minimum stable which was 1.46v and of course this resulted to lower cpu temp as well...

Still in prime 95 with normal clock i get full load approx 75 deg C if i remember correctly.

Have you tried disabling c1 and eist from bios, for your cold start issue?

Check pm please...
XMP is DDR profile settings. I think u mean the DRAM is 1.65v, not QPI/VTT. My QPI/VTT is only 1.175v. Also, what CPU cooler are u using? I don't think 75C is too high for air cooling, but I know my CPU ran hot on air. With water-cooling, it barely gets past 68C with a system running fully loaded for hours In warm room.
Edited by ezveedub - 7/12/11 at 5:28pm
     
CPUMotherboardGraphicsRAM
Intel I7 860  Asus P7P55D-E Pro MSI ATI 6990 8gb G.Skill 1600 DDR3 (4x2Gb) 
RAMHard DriveHard DriveOptical Drive
G. Skill 1600 DDR3 OCZ Agility 2 120Gb  Seagate SATA Barracuda 160GB TSH663B DVD burner 
CoolingCoolingCoolingCooling
EK Supreme HF XSPC RC360 XSPC DDC Reservoir EK-FC6990 - EN (Nickel) 
OSMonitorKeyboardPower
Windows 10 64bit Pro Gateway FHX2300 Microsoft Wireless Multimedia V2 PC Power & Cooling Silencer 750 Quad 
CaseMouseAudio
Cooler Master HAF 932 Microsoft Wireless Optical Creative 5.1 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel I7 860  Asus P7P55D-E Pro MSI ATI 6990 8gb G.Skill 1600 DDR3 (4x2Gb) 
RAMHard DriveHard DriveOptical Drive
G. Skill 1600 DDR3 OCZ Agility 2 120Gb  Seagate SATA Barracuda 160GB TSH663B DVD burner 
CoolingCoolingCoolingCooling
EK Supreme HF XSPC RC360 XSPC DDC Reservoir EK-FC6990 - EN (Nickel) 
OSMonitorKeyboardPower
Windows 10 64bit Pro Gateway FHX2300 Microsoft Wireless Multimedia V2 PC Power & Cooling Silencer 750 Quad 
CaseMouseAudio
Cooler Master HAF 932 Microsoft Wireless Optical Creative 5.1 
  hide details  
Reply
post #2843 of 3829
Quote:
Originally Posted by ezveedub View Post
XMP is DDR profile settings. I think u mean the DRAM is 1.65v, not QPI/VTT. My QPI/VTT is only 1.175v. Also, what CPU cooler are u using? I don't think 75C is too high for air cooling, but I know my CPU ran hot on air. With water-cooling, it barely gets past 68C with a system running fully loaded for hours In warm room.
Please have a look at my signature. I have NO overclock using the beautiful venomous-x (soon to become CPU 370) for cooling. Unfortunately, my qpi/vtt default xmp setting is too high, so 1.46 is the lowest i could manualy set for the memories to run stable!
A year ago i read a ton of threads about it even from Corsair site, where they stated that as long as Dram voltage and qpi/vtt stay within 0.5volts, it is safe.

By the way, YES, you are right regarding my XMP it states:
Profile DDR Voltage 1.65v
Profile QPI VOltage 1.6v

A year ago i read a ton of threads about it even from Corsair site, where they stated that as long as Dram voltage and qpi/vtt stay within 0.5volts, it is safe.

Of course, whenever i find some time, i intend to lower the speed of my memory to 1600 and try an even lower qpi/vtt voltage, hopefuly below 1.35 volts...
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7 960 GA-X58A-UD7 rev.1 (NB wc) 2x Sapphire HD7970 (wc) 3x 4GB Dominator GT 2000CL9 @1866CL8 
Hard DriveCoolingOSMonitor
INTEL X-25M 160GB / BARRACUDA XT 2TB CPU-370 (wc) Windows 7 64bit Ultimate LG 2486L-PF 
KeyboardPowerCaseMouse
Logitech G15 Enermax Revolution85+ 1250w COSMOS Pure Razor 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7 960 GA-X58A-UD7 rev.1 (NB wc) 2x Sapphire HD7970 (wc) 3x 4GB Dominator GT 2000CL9 @1866CL8 
Hard DriveCoolingOSMonitor
INTEL X-25M 160GB / BARRACUDA XT 2TB CPU-370 (wc) Windows 7 64bit Ultimate LG 2486L-PF 
KeyboardPowerCaseMouse
Logitech G15 Enermax Revolution85+ 1250w COSMOS Pure Razor 
  hide details  
Reply
post #2844 of 3829
Quote:
Originally Posted by Garland1964 View Post
Looks like this:

>>>Advanced CPU Core Features [Enter]

Intel(R) Turbo Boost Tech................Disabled
CPU Cores Enabled...........................ALL
CPU Multi Threading........................Enabled
CPU Enhanced Halt (C1E)................Disabled
C3/C6/C7 State Support....................Disabled
CPU Thermal Monitor.......................Disabled
CPU EIST Function...........................Disabled
Bi-Directional PROCHOT.................Enabled
I have almost the same setup, With Cpu thermal monitor enabled. This evening will send you rest of my settings...
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7 960 GA-X58A-UD7 rev.1 (NB wc) 2x Sapphire HD7970 (wc) 3x 4GB Dominator GT 2000CL9 @1866CL8 
Hard DriveCoolingOSMonitor
INTEL X-25M 160GB / BARRACUDA XT 2TB CPU-370 (wc) Windows 7 64bit Ultimate LG 2486L-PF 
KeyboardPowerCaseMouse
Logitech G15 Enermax Revolution85+ 1250w COSMOS Pure Razor 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
I7 960 GA-X58A-UD7 rev.1 (NB wc) 2x Sapphire HD7970 (wc) 3x 4GB Dominator GT 2000CL9 @1866CL8 
Hard DriveCoolingOSMonitor
INTEL X-25M 160GB / BARRACUDA XT 2TB CPU-370 (wc) Windows 7 64bit Ultimate LG 2486L-PF 
KeyboardPowerCaseMouse
Logitech G15 Enermax Revolution85+ 1250w COSMOS Pure Razor 
  hide details  
Reply
post #2845 of 3829
Quote:
Originally Posted by ElGreco View Post
Please have a look at my signature. I have NO overclock using the beautiful venomous-x (soon to become CPU 370) for cooling. Unfortunately, my qpi/vtt default xmp setting is too high, so 1.46 is the lowest i could manualy set for the memories to run stable!
A year ago i read a ton of threads about it even from Corsair site, where they stated that as long as Dram voltage and qpi/vtt stay within 0.5volts, it is safe.

By the way, YES, you are right regarding my XMP it states:
Profile DDR Voltage 1.65v
Profile QPI VOltage 1.6v

A year ago i read a ton of threads about it even from Corsair site, where they stated that as long as Dram voltage and qpi/vtt stay within 0.5volts, it is safe.

Of course, whenever i find some time, i intend to lower the speed of my memory to 1600 and try an even lower qpi/vtt voltage, hopefuly below 1.35 volts...
IMO, 1600 speed is fine. With X58 chipset, you're running triple bandwidth, which is more than P55, P67 and Z68. I was looking into G.Skill Sniper series. 1600 speed DDR3 with 1.25v.

http://www.newegg.com/Product/Produc...-466-_-Product

But even the G.Skill Ripjaws at 1.5v which I run are fine also.
     
CPUMotherboardGraphicsRAM
Intel I7 860  Asus P7P55D-E Pro MSI ATI 6990 8gb G.Skill 1600 DDR3 (4x2Gb) 
RAMHard DriveHard DriveOptical Drive
G. Skill 1600 DDR3 OCZ Agility 2 120Gb  Seagate SATA Barracuda 160GB TSH663B DVD burner 
CoolingCoolingCoolingCooling
EK Supreme HF XSPC RC360 XSPC DDC Reservoir EK-FC6990 - EN (Nickel) 
OSMonitorKeyboardPower
Windows 10 64bit Pro Gateway FHX2300 Microsoft Wireless Multimedia V2 PC Power & Cooling Silencer 750 Quad 
CaseMouseAudio
Cooler Master HAF 932 Microsoft Wireless Optical Creative 5.1 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel I7 860  Asus P7P55D-E Pro MSI ATI 6990 8gb G.Skill 1600 DDR3 (4x2Gb) 
RAMHard DriveHard DriveOptical Drive
G. Skill 1600 DDR3 OCZ Agility 2 120Gb  Seagate SATA Barracuda 160GB TSH663B DVD burner 
CoolingCoolingCoolingCooling
EK Supreme HF XSPC RC360 XSPC DDC Reservoir EK-FC6990 - EN (Nickel) 
OSMonitorKeyboardPower
Windows 10 64bit Pro Gateway FHX2300 Microsoft Wireless Multimedia V2 PC Power & Cooling Silencer 750 Quad 
CaseMouseAudio
Cooler Master HAF 932 Microsoft Wireless Optical Creative 5.1 
  hide details  
Reply
post #2846 of 3829
I have a question. I'm currently using a Bclk of 208 for a OC of 4.36Ghz. I been playing with 100 and 101 PCIE Fren. When I'm on 100 my Gflops are 61.5 on average. When I use 101 my gflops are on average 62.6. Also my 3dMark11 score for 100 is 3960 on average. With the 101 I break past four thousand with a average score of 4020. So I do see I performance increase here with the 101. It might be due to making the system more stable with the 208 Bclk.
Now my question I'm concerned here of Data curroption. I already had a red flag and have seen something glitchy. Please someone also check this out. on this link
http://www.overclock.net/10740376-post732.html
under IE when I scroll the Bios setting back and forth I get these weird lines. I began to notice it with using the 101 PCIE I changed back to 100. and I still see it even at 100 this is what leads me to think of Data curroption. I don't see it in firefox but I do see it in both IE-32/64. Here is a example of what I'm seeing can anyone click that link and scroll the BIOS box up and down a few times and see if they see this as well ?
Example :
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2847 of 3829
More PCI-E frequency the faster the data can travel. I can run my card up to about 120 PCI-E before she won't post (Just for benching). Not sure with two cards though. I cannot see the pic at work but I will look at it when I get home.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #2848 of 3829
I also now have Ultra DMA CRC errors on one drive, I think I checked about a month ago and there was none.
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #2849 of 3829
Hi,

I have overclocked an I7 930 to 4GHz (21*191) on gigabyte x58a-ud3r revision 1.0 board and I am seeing temps up to 66C when running Prime95 small FFT for 6 hours. Please can someone suggest what steps I would need to take to get to 4.2GHz?

BIOS Settings: Gigabyte GA-X58A-UD3R Revision 1.0 F7L


CPU Clock Ratio ............................[21x]
Intel(R) Turbo Boost Tech ..................[Disabled]
CPU Cores Enabled ..........................[All]
CPU Multi Threading ........................[Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ........................[Enabled]
CPU EIST Function ..........................[Disabled]
Bi-Directional PROCHOT .....................[Disabled]

Virtualization Technology ..................[Enabled]
Isonchronous Frequency .....................[Enabled]

Uncore & QPI Features:

QPI Link Speed .............................[x36]-(Also QPI Clock Ratio)
Uncore Frequency ...........................[3438]
Uncore Clock Ratio .........................[x18]


Standard Clock Control:

Base Clock (BCLK) Control ..................[Enabled]
BCLK Frequency (MHz) .......................[191]
PCI Express Frequency (MHz) ................[Auto]

Advanced Clock Control:

CPU Clock Drive ............................[700mV]
PCI Express Clock Drive ................... [700mV]
CPU Clock Skew .............................[0ps]
IOH Clock Skew .............................[0ps]


Advanced DRAM Features:

Performance Enhance ........................[Turbo]
Extreme Memory Profile (X.M.P) .............[Profile1]
System Memory Multiplier (SPD) .............[8]
DRAM Timing Selectable (SPD) ...............[Turbo]
Channel & Rank Interleaving.................[Auto]

Channel A + B + C

##Channel A Standard Timing Control##

CAS Latency Time ..........................9[Auto]
tRCD ......................................9[Auto]
tRP .......................................9[Auto]
tRAS .....................................24[Auto]


##Channel A Advanced Timing Control##
tRC .......................................1[Auto]
tRRD ......................................6[Auto]
tWTR ......................................6[Auto]
tWR ......................................12[Auto]
tWTP .....................................24[Auto]
tWL .......................................8[Auto]
tRFC .....................................88[Auto]
tRTP ......................................6[Auto]
tFAW .....................................30[Auto]

Command Rate (CMD) ........................2[Auto]

##Channel A Misc Timing Control##
Round Trip Latency ........................-[Auto]
B2B CAS Delay ............................66[Auto]

Advanced Voltage Control:

CPU

Load Line Calibration ......................[Standard]
CPU Vcore ..........................1.20000V[ Normal ]
Dynamic Vcore(DVID)................+0.00000V[+0.14375]
QPI/VTT Voltage ......................1.175V[1.275]
CPU PLL ..............................1.800V[1.800]


MCH/ICH

PCIE 1.500v ................................[ Normal ]
QPI PLL 1.100v .............................[ Normal ]
IOH Core 1.100v ............................[ Normal ]
ICH I/O 1.500v .............................[ Normal ]
ICH Core 1.1v ..............................[ Normal ]

DRAM

DRAM Voltage 1.500v ........................[1.600V]
DRAM Termination 0.750v ....................[.800V]
Ch-A Data VRef. 0.750v .....................[.800V]
Ch-B Data VRef. 0.750v .....................[Auto]
Ch-C Data VRef. 0.750v .....................[Auto]
Ch-A Address VRef. 0.750v ..................[Auto]
Ch-B Address VRef. 0.750v ..................[Auto]
Ch-C Address VRef. 0.750v ..................[Auto]
Really??
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 930 @ 4.0GHz Gigabyte GA-X58A-UD3R (Rev 1.0) XFX Radeon HD 5870 1GB 6GB Corsair DDR3 XMS3 PC3-12800 (1600) 
Hard DriveOSMonitorKeyboard
OCZ Vertex 3 SSD 120GB Samsung F3 1TB Win 7 Ultimate x64 BenQ G2420HDB, Iiyama ProLite E2200WS Logitech G15 
PowerCase
Enermax Revolution85+ ERV1250EGT 1.25 kW Silverstone TJ07B-W 
  hide details  
Reply
Really??
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 930 @ 4.0GHz Gigabyte GA-X58A-UD3R (Rev 1.0) XFX Radeon HD 5870 1GB 6GB Corsair DDR3 XMS3 PC3-12800 (1600) 
Hard DriveOSMonitorKeyboard
OCZ Vertex 3 SSD 120GB Samsung F3 1TB Win 7 Ultimate x64 BenQ G2420HDB, Iiyama ProLite E2200WS Logitech G15 
PowerCase
Enermax Revolution85+ ERV1250EGT 1.25 kW Silverstone TJ07B-W 
  hide details  
Reply
post #2850 of 3829
Quote:
Originally Posted by UNOE View Post
I also now have Ultra DMA CRC errors on one drive, I think I checked about a month ago and there was none.
Check the cable going to the drive or change it out. I bet you have a tight bend in it or the cable is faulty.
Quote:
Originally Posted by harm View Post
Hi,

I have overclocked an I7 930 to 4GHz (21*191) on gigabyte x58a-ud3r revision 1.0 board and I am seeing temps up to 66C when running Prime95 small FFT for 6 hours. Please can someone suggest what steps I would need to take to get to 4.2GHz?

BIOS Settings: Gigabyte GA-X58A-UD3R Revision 1.0 F7L
Increase bclk until it doesn't pass a stress test then increase vcore or QPI and you should be good.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *