Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 299

post #2981 of 3829
What bios settings should I post to get you expert assistance to push this chip and tweak the ram NoGuru?

Followed a 920/930 4.0 guide to get where I am but I'm flying blind with intel

Cheers
post #2982 of 3829
Found this BIOS Settings Posting Template in OP Post #1

Code:

[code][FONT="Courier New"][Size=5][B][U]GIGABYTE GA-X58A-UD7[/U][/B][/Size][B][U]


MB Intelligent Tweaker(M.I.T.)[/U]

> Advanced Frequency Settings [Press Enter][/B]

CPU Clock Ratio............................: 
CPU Frequency ........................(GHz): 
[B]> Advanced CPU Core Features [Press Enter][/B]

Intel(R) Turbo Boost Tech..................: 
CPU Cores Enabled..........................: 
CPU Multi Threading........................: 
CPU Enhanced Halt (C1E)....................: 
C3/C6/C7 State Support.....................: 
CPU Thermal Monitor........................: 
CPU EIST Function..........................: 
Bi-Directional PROCHOT.....................: 

QPI Clock Ratio............................: 
QPI Link Speed........................(GHz): 
Uncore Clock Ratio.........................: 
Uncore Frequency......................(MHz): 
[B]>>>>> Standard Clock Control[/B]
Base Clock(BCLK) Control...................: 
BCLK Frequency(MHz)........................: 
Extreme Memory Profile(X.M.P.).............: 
System Memory Multiplier (SPD).............: 
Memory Frequency(MHz)......................: 
PCI Express Frequency(MHz).................:
[B]>>>>> Advanced Clock Control[/B]
CPU Clock Drive (mV).......................: 
PCI Express Clock Drive (mV)...............: 
CPU Clock Skew (ps)........................: 
IOH Clock Skew (ps)........................: 

[B]> Advanced Memory Settings [Press Enter][/B]

Extreme Memory Profile(X.M.P.).............: 
System Memory Multiplier (SPD).............: 
Memory Frequency(MHz)......................: 
Performance Enhance........................: 
DRAM Timing Selectable (SPD)...............: 
Profile DDR Voltage........................: 
Profile QPI Voltage........................: 
Channel Interleaving.......................: 
Rank Interleaving..........................: 
[B]>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control[/B]
Cas Latency Time...........................: 
tRCD.......................................: 
tRP........................................: 
tRAS.......................................: 
[B]>>>>> Channel A, B, & C Advanced Timing Control[/B]
tRC........................................: 
tRRD ......................................: 
tWTR ......................................: 
tWR........................................: 
tWTP.......................................: 
tWL........................................: 
tRFC.......................................: 
tRTP.......................................: 
tFAW.......................................: 
Command Rate (CMD) ........................: 
[B]>>>>> Channel A, B, & C Misc Timing Control[/B]
B2B CAS Delay..............................: 
Round Trip Latency.........................: 

[B]> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads[/B]
Different DIMMs............................: 
Different Ranks............................: 
On The Same Rank...........................: 
[B]>>>>> Channel A, B, & C Writes Followed By Writes[/B]
Different DIMMs............................: 
Different Ranks............................: 
On The Same Rank...........................: 

[B]> Advanced Voltage Settings [Press Enter]

>>> CPU[/B]
LoadLine Calibration.......................: 
CPU Vcore..................................: 
xDynamic Vcore(DVID).......................: 
QPI/VTT Voltage............................: 
CPU PLL....................................: 
[B]>>> MCH/ICH[/B]
PCIE.......................................: 
QPI PLL....................................: 
IOH Core...................................: 
ICH I/O....................................: 
ICH Core...................................: 
[B]>>> Dram[/B]
DRAM Voltage...............................: 
DRAM Termination...........................: 
Ch-A Data VRef.............................: 
Ch-B Data VRef.............................: 
Ch-C Data VRef.............................: 
Ch-A Address VRef..........................: 
Ch-B Address VRef..........................: 
Ch-C Address VRef..........................: 

[B]> Miscellaneous Settings [Press Enter][/B]

Isochronous Support........................: 
Virtualization Technology..................: 

[b]GOOC 2010 WWF Rev.2 Settings Only[/b] 
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #2983 of 3829
Quote:
Originally Posted by Freakn View Post
What bios settings should I post to get you expert assistance to push this chip and tweak the ram NoGuru?

Followed a 920/930 4.0 guide to get where I am but I'm flying blind with intel

Cheers
Thanks for the MIT Ken!

I will be gone all weekend so I may not get back to you until Monday but there are others here that can offer great assistance.

Anyway, post your clocks and main volts or the whole MIT is fine too, we can just edit it for you but right now I would just down clock the RAM and focus on the CPU clocks.
For the most part, vcore and QPI are the two volts you will need to increase. To help save some time, I would set vcore to 1.40v and QPI to 1.38v and start increasing BCLK and see where that gets you.'

Not sure what your stress tests method is but I start with the ones that create the most heat and most stress first and as the clocks get higher less heat and stress but they run longer.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #2984 of 3829
Thanks NG & Ken,

I'll post all that info today and through those volts into it NG

I've got a simple stress test that matches the same enviroment as to the purpose of this rig, F@H. OC and let it fold, if it crashes I know something is wrong
post #2985 of 3829
Hopefully everything is there

Any suggestion to reach 4.2



> Advanced Frequency Settings [Press Enter][/B]

CPU Clock Ratio............................: 2.0
CPU Frequency ........................(GHz): 3.8
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: D
CPU Cores Enabled..........................: ALL
CPU Multi Threading........................: EN
CPU Enhanced Halt (C1E)....................: D
C3/C6/C7 State Support.....................: D
CPU Thermal Monitor........................: D
CPU EIST Function..........................: D
Bi-Directional PROCHOT.....................: EN

QPI Clock Ratio............................: 36
QPI Link Speed........................(GHz): 6.84
Uncore Clock Ratio.........................: 16
Uncore Frequency......................(MHz): 3.04
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: EN
BCLK Frequency(MHz)........................: 190
Extreme Memory Profile(X.M.P.).............: D
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1520
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 1000
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: D
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1520
Performance Enhance........................: ST
DRAM Timing Selectable (SPD)...............: EX
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.2
Channel Interleaving.......................: 6
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control

Cas Latency Time...........................: 9
tRCD.......................................: 11
tRP........................................: 9
tRAS.......................................: 27
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: 27
tRRD ......................................: 4
tWTR ......................................: 4
tWR........................................: 8
tWTP.......................................: 19
tWL........................................: 7
tRFC.......................................: 86
tRTP.......................................: 4
tFAW.......................................: 20
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: -
Round Trip Latency.........................: 59

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads

Different DIMMs............................: 6
Different Ranks............................: 5
On The Same Rank...........................: 1
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: 6
Different Ranks............................: 6
On The Same Rank...........................: 1

> Advanced Voltage Settings [Press Enter]

>>> CPU

LoadLine Calibration.......................: L2
CPU Vcore..................................: 1.4
xDynamic Vcore(DVID).......................: .000
QPI/VTT Voltage............................: 1.34
CPU PLL....................................: 1.88
>>> MCH/ICH
PCIE.......................................: 1.5
QPI PLL....................................: 1.1
IOH Core...................................: 1.2
ICH I/O....................................: 1.5
ICH Core...................................: 1.1
>>> Dram
DRAM Voltage...............................: 1.6
DRAM Termination...........................: .75
Ch-A Data VRef.............................: .75
Ch-B Data VRef.............................: .75
Ch-C Data VRef.............................: .75
Ch-A Address VRef..........................: .75
Ch-B Address VRef..........................: .75
Ch-C Address VRef..........................: .75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................:
Virtualization Technology..................:
Edited by Freakn - 10/14/11 at 11:27pm
post #2986 of 3829
I recommend to add this to the OP :
http://forums.hardwarezone.com.sg/sh....php?t=2300219

Its an X-Fi mod for Realtek drivers.
Ti-89 Titanium
(13 items)
 
   
CPUMotherboardRAMHard Drive
Motorola 68k @16 MHz Ti-89 HW4 256 KB 2.6 MB Flash ROM 
OSMonitorPowerCase
Ti-89 OS 3.10 LCD Dot-Matrix 160x100 4x 1.5V AAA Ti-89 HW4 Black 
CPUMotherboardGraphicsRAM
Intel Core™ i7 930 Gigabyte GA-X58A-UD3R 2.0 Gigabyte GTX 470 SOC G.Skill RX 2x4GB 1600C8 
Hard DriveHard DriveOptical DriveCooling
PNY Prevail Elite 120GB Hitachi 7K1000.C 1TB LG GH24LS50 Noctua NH-C12P SE14 
OSOSMonitorKeyboard
Windows 8 Pro x64 Lubuntu 13.10 x64 Samsung BX2250 Logitech Illuminated 
PowerCaseMouseAudio
Be Quiet! S.P. E⁷ 600W Fractal Design Core 3000 Logitech G300 AKG K240 Studio 
  hide details  
Reply
Ti-89 Titanium
(13 items)
 
   
CPUMotherboardRAMHard Drive
Motorola 68k @16 MHz Ti-89 HW4 256 KB 2.6 MB Flash ROM 
OSMonitorPowerCase
Ti-89 OS 3.10 LCD Dot-Matrix 160x100 4x 1.5V AAA Ti-89 HW4 Black 
CPUMotherboardGraphicsRAM
Intel Core™ i7 930 Gigabyte GA-X58A-UD3R 2.0 Gigabyte GTX 470 SOC G.Skill RX 2x4GB 1600C8 
Hard DriveHard DriveOptical DriveCooling
PNY Prevail Elite 120GB Hitachi 7K1000.C 1TB LG GH24LS50 Noctua NH-C12P SE14 
OSOSMonitorKeyboard
Windows 8 Pro x64 Lubuntu 13.10 x64 Samsung BX2250 Logitech Illuminated 
PowerCaseMouseAudio
Be Quiet! S.P. E⁷ 600W Fractal Design Core 3000 Logitech G300 AKG K240 Studio 
  hide details  
Reply
post #2987 of 3829
Quote:
Originally Posted by Freakn View Post
Hopefully everything is there

Any suggestion to reach 4.2



> Advanced Frequency Settings [Press Enter][/B]

CPU Clock Ratio............................: 21
CPU Frequency ........................(GHz): 4.2
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: D
CPU Cores Enabled..........................: ALL
CPU Multi Threading........................: EN
CPU Enhanced Halt (C1E)....................: D
C3/C6/C7 State Support.....................: D
CPU Thermal Monitor........................: D
CPU EIST Function..........................: D
Bi-Directional PROCHOT.....................: EN

QPI Clock Ratio............................: 36
QPI Link Speed........................(GHz): 6.84
Uncore Clock Ratio.........................: 16
Uncore Frequency......................(MHz): 3.04
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: EN
BCLK Frequency(MHz)........................: 200
Extreme Memory Profile(X.M.P.).............: D
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1520
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 1000
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: D
System Memory Multiplier (SPD).............: 6
Memory Frequency(MHz)......................: 1520
Performance Enhance........................: ST
DRAM Timing Selectable (SPD)...............: EX
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.2
Channel Interleaving.......................: 6
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control

Cas Latency Time...........................: 9
tRCD.......................................: 11
tRP........................................: 9
tRAS.......................................: 27
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: 27
tRRD ......................................: 4
tWTR ......................................: 4
tWR........................................: 8
tWTP.......................................: 19
tWL........................................: 7
tRFC.......................................: 86
tRTP.......................................: 4
tFAW.......................................: 20
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: -
Round Trip Latency.........................: 59

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads

Different DIMMs............................: 6
Different Ranks............................: 5
On The Same Rank...........................: 1
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: 6
Different Ranks............................: 6
On The Same Rank...........................: 1

> Advanced Voltage Settings [Press Enter]

>>> CPU

LoadLine Calibration.......................: L2
CPU Vcore..................................: 1.4
xDynamic Vcore(DVID).......................: .000
QPI/VTT Voltage............................: 1.38
CPU PLL....................................: 1.88
>>> MCH/ICH
PCIE.......................................: 1.5
QPI PLL....................................: 1.1
IOH Core...................................: 1.2
ICH I/O....................................: 1.5
ICH Core...................................: 1.1
>>> Dram
DRAM Voltage...............................: 1.6
DRAM Termination...........................: .75
Ch-A Data VRef.............................: .75
Ch-B Data VRef.............................: .75
Ch-C Data VRef.............................: .75
Ch-A Address VRef..........................: .75
Ch-B Address VRef..........................: .75
Ch-C Address VRef..........................: .75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................:
Virtualization Technology..................:
I will try (forgot the average for 920/930, need help).

To get to CPU 4.2GHz;

If your CPU ratio is max at 21 x BCLK 200 = 4.2 GHz, if 20 x BCLK 210 = 4.2GHz.

Set the memory multiplier to 6. Memory clock = Memory Multi x BCLK.
If 8 x 210 = 1680 MHz difficult to tell the stability is from RAM settings/voltage or CPU OC.

Key in the memory main rated timings such as 8-8-8-24 2T and left the memory sub-timings on Auto. After the CPU 4.2 GHz stabilized, work on the RAM, not both at the same time. What is the RAM rated spec?

All the Uncore ratio and QPI 36 as above, no changes to your current settings.

As NoGuru suggested start with Vcore 1.4v and QPI/vtt 1.38v. Lock on the CPU ratio 21 and start with BCLK 195, work the way up to 200/210 + run stability test, adjust voltages accordingly (watch the load temp). Find the lowest possible Vcore and QPI/vtt voltage to sustain stable 4.2GHz.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #2988 of 3829
AFAIK with your 2000MHz Super Talent, I wouldn't expect a memory multi of 8 to be a problem. Personally, 6x didn't want to work on my UD3R without slow mode, but I don't know that that is the same for all boards.

Uncore clock ratio 16 or 17x, whichever works best for you. (Some say 2x or 2x +1 memory multi to get uncore multi...)

With 12GB of ram you may need more QPI/VTT than 1.38v. You will know to raise that if you get 124 bluescreens. With vcore you may be able to use less than 1.4v, and you can lower that till you get 101 bluescreens and then raise it two increments.

Otherwise I agree with what Ken says.

Quote:
BSOD codes for overclocking
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
Nyarlathotep
(17 items)
 
Cxaxukluth
(19 items)
 
Yog-Sothoth
(10 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7 3970X ASUS X79 ROG Rampage IV Extreme Bios 2105 EVGA KingPin Classified 780 Ti 3GB Tri-SLI  G.Skill Trident X F3-2400C10Q-16GTX 16GB (... 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 4 SSD Seagate Barracuda 1TB ST31000524AS Lite-On IHAS124 24X DVDRW 3 x XSPC Rasa 750 RX360 Universal CPU Water Coo... 
CoolingOSMonitorPower
3 x EK-FC780 GTX Classy - Nickel Windows 7 Professional x64 3 x Dell U2412M SilverStone 1500W V2.2 x 2 
Case
Lian Li Pitstop T60 Testbench 
CPUMotherboardGraphicsRAM
i7 - 5960X Asus Rampage Extreme V Gigabyte Titan X 12GB G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Pro Series 1TB SSD 3 x Seagate 2TB  Seagate 3TB LG 
CoolingCoolingOSMonitor
Phobya Xtreme 1260 Radiator XSPC D5 Photon 170 Reservoir/Pump Combo Microsoft Windows 7 Professional 64bit with SP1  Samsung S34E790C 34in Ultrawide Curved LED Mo... 
KeyboardPowerCaseMouse
Microsoft Wireless 3000 Silverstone ST1500 Antec Eleven Hundred Microsoft Wireless 3000 
AudioAudioAudio
Audioengine D1 Premium 24-Bit DAC Audioengine 5+ Premium Powered Speakers Black Audioengine S8 Black 
CPUMotherboardGraphicsRAM
i7 3960X Asus Rampage IV Extreme Gainward "GOOD" GTX 580 x 2 AData x 2 
Hard DriveCoolingCoolingOS
Seagate XSPC Rasa EX 360 crossflow kit x 2, XSPC Rasa E... EK GW-580 Waterblocks Win 7 Pro 
PowerCase
SilverStone Strider ST1500 InWin D Frame 
  hide details  
Reply
Nyarlathotep
(17 items)
 
Cxaxukluth
(19 items)
 
Yog-Sothoth
(10 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7 3970X ASUS X79 ROG Rampage IV Extreme Bios 2105 EVGA KingPin Classified 780 Ti 3GB Tri-SLI  G.Skill Trident X F3-2400C10Q-16GTX 16GB (... 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 4 SSD Seagate Barracuda 1TB ST31000524AS Lite-On IHAS124 24X DVDRW 3 x XSPC Rasa 750 RX360 Universal CPU Water Coo... 
CoolingOSMonitorPower
3 x EK-FC780 GTX Classy - Nickel Windows 7 Professional x64 3 x Dell U2412M SilverStone 1500W V2.2 x 2 
Case
Lian Li Pitstop T60 Testbench 
CPUMotherboardGraphicsRAM
i7 - 5960X Asus Rampage Extreme V Gigabyte Titan X 12GB G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Pro Series 1TB SSD 3 x Seagate 2TB  Seagate 3TB LG 
CoolingCoolingOSMonitor
Phobya Xtreme 1260 Radiator XSPC D5 Photon 170 Reservoir/Pump Combo Microsoft Windows 7 Professional 64bit with SP1  Samsung S34E790C 34in Ultrawide Curved LED Mo... 
KeyboardPowerCaseMouse
Microsoft Wireless 3000 Silverstone ST1500 Antec Eleven Hundred Microsoft Wireless 3000 
AudioAudioAudio
Audioengine D1 Premium 24-Bit DAC Audioengine 5+ Premium Powered Speakers Black Audioengine S8 Black 
CPUMotherboardGraphicsRAM
i7 3960X Asus Rampage IV Extreme Gainward "GOOD" GTX 580 x 2 AData x 2 
Hard DriveCoolingCoolingOS
Seagate XSPC Rasa EX 360 crossflow kit x 2, XSPC Rasa E... EK GW-580 Waterblocks Win 7 Pro 
PowerCase
SilverStone Strider ST1500 InWin D Frame 
  hide details  
Reply
post #2989 of 3829
3 DIMMs x 4GB @ 2000 MHz (200 x 10) 9-11-9-27 2T/1T should doable but might take tons of QPI/vtt on a 920/930. Worth a shot though. If not possible, 1600 MHz (200 x 8) 8-9-8-24 1T should perform roughly eqaul to rated specs.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #2990 of 3829
Well thats a heap of info thanks all.

I've put in some new numbers but for some reason it will never stay at x21, it drops to 20 for some reason even though it states up to x21 can be selected

Stressing the current setup now
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *