Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 317

post #3161 of 3836
In fact i flash with @bios the F9d (the one without the mod) this one work and i save it to the second BIOS. Then i flash the modded BIOS with the procedure explain here and the intel RAID doesn't load (after detecting sata devices, the intel raid screen should show Raid compatible devices but it doesn't show it). i have directly the screen were i can see Usb devices (after that, normaly, there is the loading of windows).
I tried to restore the bios with the dualBios but it doesn't work. The bios isn't brick, i can access to it. The intel raid firmware don't want to load.
post #3162 of 3836
Just to make sure, have you enabled raid in bios?
Integrated peripherals> "ICH SATA Control Mode" set to "Raid(XHD)".
post #3163 of 3836
Of course, i tested with and without XHD
post #3164 of 3836
Quote:
Originally Posted by Ruelmen View Post

Of course, i tested with and without XHD
Still not sure we are talking about the same thing. smile.gif
The 1st option "eXtreme Hard Drive" which can be enabled or disabled leave it at disabled.
The 2nd option "ICH SATA Control Mode" which can be IDE, RAID(xhd) or AHCI set it to RAID(xhd).

Most similar BIOS pic I could find.
463
post #3165 of 3836
We talk about the same thing please believe that i know very well the working of a PC. The option PCH SATA control mode is at raid but i tried with and without XHD and it doesn't change anything. I insist the problem is with the loading of intel raid firmware. Somtimes just fiew word Intel Rapid Storage are on the screen when booting but it freeze and stay with this words on the screen.
post #3166 of 3836
Then the only thing I can think of is remove all drives, reset CMOS from back button and set your preferences again.
Then try connecting a drive and see if it works. If not, maybe the bios was corrupted when first flashed, reflash.
Sorry, no more ideas. frown.gif
post #3167 of 3836
Ok, i try that. thank you for your help thank you a lot.
post #3168 of 3836
Hi I have the ud3r and i have a question

as some of you may or may not know the spacing and layout of the pci and pci-e slots in on this mobo are quite annoying, while it says it is a triple sli motherboard you can't fit 3 video cards in a mid tower at all.

In my case I have a mid tower 690 ii advanced, and i have to keep my cards right on top of eachother restricting air flow. But i plan to buy a switch 810 case, do you think I would be able to use the bottom pci-e slot and my top one with space.

the reason i can't with the 690 ii advanced is because it doesn't provide enough clearance from the psu

basically I want to use slot 1 and 3 slot on my video cards, in my current mid tower there is not enough room. Will a full tower allow this like the switch 810?
post #3169 of 3836
Hi guys, I own an UD7 v.1 with a I7-920, I'm not alble to manage well the dynamic Vcore!

If I set for example an Oc at 3,6ghz the Vcore in full-load (Prime95) using dynamic Vcore will be 1,20V instead if I set manually the Vcore I can stay with 1,168V
Main Pc
(15 items)
 
New Baby
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-990X @ 4,65Ghz HT Off ASUS Ramoage III Extreme 2 X Sapphire 7970 @ 1200/1500 Zotac GeForce GTX 650 AMP 
RAMHard DriveHard DriveOptical Drive
Corsair Dominator 2X 80Gb Intel X25 Raid0 1Tb WD Caviar Green Plextron DVD 
CoolingCoolingCoolingCooling
Koolance Cpu380 2X Koolance fullcover 7970 Swiftech MCP35X2 Watercool MO-RA3 9X120 pro 
OSPowerCase
Win7 Ultimate 64Bit Silverstone Lian-Li B70 
CPUMotherboardGraphicsRAM
5960X Asus Rampage V Extreme Evga 980ti SC X 2 - SLI 16Gb GSkill Ripjaws4 3200 
Hard DriveCoolingCoolingCooling
Raid0 2X Samsung 850 Pro Koolance 380i Radiator 420 Alphacool NexXxos XT45 Full Copper Radiator 420 Alphacool UT60 Full Copper 
CoolingCoolingPowerCase
2X Aquacomputer D5 Aquaero 6 XT Seasonic P-1000 Dimastech Easy XL 
  hide details  
Reply
Main Pc
(15 items)
 
New Baby
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-990X @ 4,65Ghz HT Off ASUS Ramoage III Extreme 2 X Sapphire 7970 @ 1200/1500 Zotac GeForce GTX 650 AMP 
RAMHard DriveHard DriveOptical Drive
Corsair Dominator 2X 80Gb Intel X25 Raid0 1Tb WD Caviar Green Plextron DVD 
CoolingCoolingCoolingCooling
Koolance Cpu380 2X Koolance fullcover 7970 Swiftech MCP35X2 Watercool MO-RA3 9X120 pro 
OSPowerCase
Win7 Ultimate 64Bit Silverstone Lian-Li B70 
CPUMotherboardGraphicsRAM
5960X Asus Rampage V Extreme Evga 980ti SC X 2 - SLI 16Gb GSkill Ripjaws4 3200 
Hard DriveCoolingCoolingCooling
Raid0 2X Samsung 850 Pro Koolance 380i Radiator 420 Alphacool NexXxos XT45 Full Copper Radiator 420 Alphacool UT60 Full Copper 
CoolingCoolingPowerCase
2X Aquacomputer D5 Aquaero 6 XT Seasonic P-1000 Dimastech Easy XL 
  hide details  
Reply
post #3170 of 3836
Looking for some help! I am setting up my X58A-UD7 PC for Flight Simulator X
I will be using 2 Western Digital Velociraptors. One for the OS and the other for FSX
The current wisdom with FSX PC's is that the SATA ports should be set to IDE.
Since I am looking for Maximum HD performance in IDE mode I was wondering which
Sata ports on the board I should use and what are the appropriate Bios setting.
FSX forums talk about Enhanced IDE setting in the bios but I cannot find any referance to that
in the UD7 bios. The two HDD's I am using are WD3000GLFS for the OS and a WD6000HLHX
for FSX and they are not in any raid config. No raid involved here. Also How do I setup the Marvel drivers
for this.

I can overclock a CPU and Mem and graphics card but when it comes to storage I am clueless!
Thanks for the help
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *