Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *
New Posts  All Forums:Forum Nav:

* The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * - Page 80

post #791 of 3831
If you run very high speed memory and/or have extremely high uncore, you pretty much Have to run 1.6v+ QPI/VTT to get stable - that's just how it is unless you have an amazing IMC.

Memory Manufactures (G.SKill in particular) routinely suggest just the same. It's very unlikely to hurt anything, even on Air.
i7 930
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 [4.0@1.23v] [4.2@1.32v] ASUS P6T-Deluxe [v1] EVGA GTX 480 SC+ [850/2000@1.100v] OCZ Gold DDR3 [3x2GB] [1600@8-8-8-24-1N] 
Hard Drive
OCZ Vertex 2e (120GB) SSD 
  hide details  
Reply
i7 930
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 [4.0@1.23v] [4.2@1.32v] ASUS P6T-Deluxe [v1] EVGA GTX 480 SC+ [850/2000@1.100v] OCZ Gold DDR3 [3x2GB] [1600@8-8-8-24-1N] 
Hard Drive
OCZ Vertex 2e (120GB) SSD 
  hide details  
Reply
post #792 of 3831
Quote:
Originally Posted by MacG32 View Post
Welcome and added to the owners list! I sure haven't had that problem. You could download the latest version here: EasyTune6 B10.0728.1
Problem solved. Thanks.

Final test at 975 EE @ 4.0GHz.

vCore 1.30000v
VTT: 1.355v
IOH: 1.18v
DRAM: 1.64 - 1600MHz 6-8-6-20
PLL: 1.60v
QPI PLL: 1.20v
ICH 1.14v
ICH I/O: Normal
PCIE: Auto

by _AntLionBR_
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 980X ES @ 4.5GHz 1.392v Gigabyte GA-X58A-UD7 Zotac GTX 580 1536/384 OC Corsair Dominator GT 6 GB DDR3-2000MHz C8 
Hard DriveOptical DriveOSKeyboard
WD 750GB WD7500AADS Sony AD-7240S DVD/RW Win 7 Ult. x64 SteelSeries 6G 
PowerCaseMouseMouse Pad
Corsair CMPSU-620HX Cooler Master RC-690 w/8x Scythe fans 120mm Logitech G5 SteelSeries Xai, QcK + 9HD 
  hide details  
Reply
by _AntLionBR_
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 980X ES @ 4.5GHz 1.392v Gigabyte GA-X58A-UD7 Zotac GTX 580 1536/384 OC Corsair Dominator GT 6 GB DDR3-2000MHz C8 
Hard DriveOptical DriveOSKeyboard
WD 750GB WD7500AADS Sony AD-7240S DVD/RW Win 7 Ult. x64 SteelSeries 6G 
PowerCaseMouseMouse Pad
Corsair CMPSU-620HX Cooler Master RC-690 w/8x Scythe fans 120mm Logitech G5 SteelSeries Xai, QcK + 9HD 
  hide details  
Reply
post #793 of 3831
Did some further tests and couldn't get qpi any lower without it becoming unstable, in the end I'm looking at 1.615 qpi and 1.64 dram. I think I'm done for the day a piece of cable flew into one of the fans just as I had reset it with a higher voltage. I heard a loud screeching noise and almost **** myself :s haha
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
post #794 of 3831
I am getting a UD7 here in a couple of days and wanted to run a 3x4 2000/c9 kit on it. I have seen a few people that were unable to get it to work. Has anyone successfully done it? @ 2000?

Thanks,
Dr_DX
MVF
(4 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K MAXIMUS V FORMULA AMD Radeon HD 7900 Series G Skill Trident X 2x8Gb DDR3 2400 
  hide details  
Reply
MVF
(4 items)
 
  
CPUMotherboardGraphicsRAM
i7-3770K MAXIMUS V FORMULA AMD Radeon HD 7900 Series G Skill Trident X 2x8Gb DDR3 2400 
  hide details  
Reply
post #795 of 3831
The settings I have at the ^moment seem stable I had prime 95 running for about half an hour at that point I thought I would have a go at some lower voltages this is when I had quite a few issues. Saying that when I had my CPU clocked at 3.6ghz it was a breeze getting these sticks to 1800mhz
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
post #796 of 3831
If I remember right I had the dram at 1.54v and qpi at 1.295v I think
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
post #797 of 3831
Quote:
Originally Posted by _AntLionBR_ View Post
Problem solved. Thanks.

Final test at 975 EE @ 4.0GHz.

vCore 1.30000v
VTT: 1.355v
IOH: 1.18v
DRAM: 1.64 - 1600MHz 6-8-6-20
PLL: 1.60v
QPI PLL: 1.20v
ICH 1.14v
ICH I/O: Normal
PCIE: Auto
You're welcome. Looking good.

Quote:
Originally Posted by mrtomek View Post
...I heard a loud screeching noise and almost **** myself :s haha
lmao

Quote:
Originally Posted by dr_dx View Post
I am getting a UD7 here in a couple of days and wanted to run a 3x4 2000/c9 kit on it. I have seen a few people that were unable to get it to work. Has anyone successfully done it? @ 2000?

Thanks,
Dr_DX
Looking forward to adding a new member. Well, we've had these members that got close: 12GB Kingston HYPERX T1 2000@1640MHz and 6GB G.Skill Ripjaws 2000 @ 1820MHz. It seems 16-1800+ might be as far as it goes, when your processor is at it's max overclock.

Quote:
Originally Posted by mrtomek View Post
The settings I have at the ^moment seem stable I had prime 95 running for about half an hour at that point I thought I would have a go at some lower voltages this is when I had quite a few issues. Saying that when I had my CPU clocked at 3.6ghz it was a breeze getting these sticks to 1800mhz
I would say, first lower your Uncore Clock Ratio, so the Uncore Frequency is only 4000Mhz. Next try setting your QPI and DRAM back to their voltages used in your 3.6GHz OC and lowering the timings. 9-9-9-25 through 27, then 10-10-10-24 through 27. I've noticed when the Uncore Frequency is so high, it seems you have to lower your timings some to get stable again. I hope that helps.
Under The Radar
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD - Ryzen 7 1800X Asus - ROG Crosshair VI Hero Gigabyte - GeForce GTX 1080 Ti 11GB FE G.Skill - Flare X 32GB (4 x 8GB) DDR4-3200 
Hard DriveHard DriveOptical DriveCooling
Samsung - 850 Pro 512GB 2.5" SSD Western Digital - Black 6TB 3.5" 7200RPM HDD Asus - BW-12B1ST/BLK/G/AS Blu-Ray/DVD/CD Writer Corsair - H115i 104.7 CFM Liquid CPU Cooler 
OSMonitorMonitorKeyboard
Microsoft - Windows 10 Pro 64-bit Acer - G247HYL bmidx 23.8" 1080p 60Hz Acer - G247HYL bmidx 23.8" 1080p 60Hz Ducky - Shine 4 
PowerCaseMouseMouse Pad
EVGA - SuperNOVA P2 650W 80+ Platinum Certified... Corsair - Vengeance C70 (Black) ATX Mid Tower Cooler Master - Xornet Fellowes - Microban 
Audio
Realtek - ALC1220 - 7.1 Channel High Definition 
  hide details  
Reply
Under The Radar
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD - Ryzen 7 1800X Asus - ROG Crosshair VI Hero Gigabyte - GeForce GTX 1080 Ti 11GB FE G.Skill - Flare X 32GB (4 x 8GB) DDR4-3200 
Hard DriveHard DriveOptical DriveCooling
Samsung - 850 Pro 512GB 2.5" SSD Western Digital - Black 6TB 3.5" 7200RPM HDD Asus - BW-12B1ST/BLK/G/AS Blu-Ray/DVD/CD Writer Corsair - H115i 104.7 CFM Liquid CPU Cooler 
OSMonitorMonitorKeyboard
Microsoft - Windows 10 Pro 64-bit Acer - G247HYL bmidx 23.8" 1080p 60Hz Acer - G247HYL bmidx 23.8" 1080p 60Hz Ducky - Shine 4 
PowerCaseMouseMouse Pad
EVGA - SuperNOVA P2 650W 80+ Platinum Certified... Corsair - Vengeance C70 (Black) ATX Mid Tower Cooler Master - Xornet Fellowes - Microban 
Audio
Realtek - ALC1220 - 7.1 Channel High Definition 
  hide details  
Reply
post #798 of 3831
That sounds good Mac I'll give it a go.
The only reason I had the uncore so high is because the gigabyte overclocking tutorial suggested to have the uncore at 2x +1 the memory frequency but saying that I'm not comfortable having the qpi voltage so high. Good idea changing the timings though, even if I can find something stable at 10 10 10 24 I can always try dropping them from that point.
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
post #799 of 3831
Hey guys..

I have G Skill Trident @ 2064 (or lil higher) with 4.4 OC no prob.. you will need the 1.59 QPI for 2000 at least - period.. I have researched a lot regarding this also since building my new rig and haven't seen anyone do much better..

You can raise your memV to 1.7 safely also but prefer to stick to 1.68 max althoguh presently i'm at 1.64 from memory (on another pc atm).. Timings are stock 99924 Turbo 2T.. currently attempting to push to T1 Extreme but with 4.4 OC it's a bit fiddly.. I can do it with 16-1700 range and tight timings no prob.. anyway never say never though

Also not convinced higher bandwidth over tighter timings is worth it unless fine tuning your benchmarks Although as i have the luxury i'm exploring it.

Basically just confirming your findings to date

p.s. agreed.. the x2 +1 is fine but uncore over 4000 and your pushing your luck
Edited by gobbo353 - 9/28/10 at 4:04am
960 Done Right
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 960 (25x180) @4.50 (VC1.55 HT & SS on) GA-X58A-UD7 rev1 ATI Radeon HD 5970 @950/1200 .. GTS 450 @940/2200 12GB GSKILL F3-16000CL9-2TGBTD @1760 88820 1.62v 
Hard DriveOptical DriveOSMonitor
GSkill Falcon I - 128GB SSD whatever WINDOWS 7 x64 48" Sony 1080p 
PowerCase
CORSAIR HX-850 ANTEC 1200 
  hide details  
Reply
960 Done Right
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 960 (25x180) @4.50 (VC1.55 HT & SS on) GA-X58A-UD7 rev1 ATI Radeon HD 5970 @950/1200 .. GTS 450 @940/2200 12GB GSKILL F3-16000CL9-2TGBTD @1760 88820 1.62v 
Hard DriveOptical DriveOSMonitor
GSkill Falcon I - 128GB SSD whatever WINDOWS 7 x64 48" Sony 1080p 
PowerCase
CORSAIR HX-850 ANTEC 1200 
  hide details  
Reply
post #800 of 3831
^ So happy you posted! There is hope for me afterall

Can someone please explain this standard, turbo, extreme thing? I just always had it set on standard as I always thought of it as a dud setting for some reason.

EDIT: I only say this because I don't see any actual figures being changed

Turbo enabled and 2T on the clocks plus a lower QPI and DRAM voltage saved me about .2sec in super pi at 1M
Edited by mrtomek - 9/28/10 at 5:47am
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
i7 System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 D0 @ 4.0Ghz Gigabyte GA-X58A-UD7 Gigabyte 5850 6GB G.Skill Trident @ 2000Mhz 9-9-9-24 
Hard DriveOSMonitorPower
WD Caviar Black 1Tb x2 Win7 x64 Premium Samsung 24'' 1920x1200 Antec CP-1000 
CaseMouse
Antec P183 Logitech G9 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club *