Overclock.net › Forums › Graphics Cards › NVIDIA › GTX 400 Overclocking/Modding Thread
New Posts  All Forums:Forum Nav:

GTX 400 Overclocking/Modding Thread - Page 50

post #491 of 926
Hipro's BIOS works like a charm

...and the mods are going good.. small update:

Using Kinc's OCP mods for GPUv shutdown in conjunction with GPUv hardmod = DEAD GPU This has been confirmed over on XS. If you plan on DICE'ing or LN adjust GPUv with ABE and NOT hardmod
post #492 of 926
Oh, good info to know. And now a noob question. ABE referring to AfterBurner?


Want to go above 1.21v here, just not sure how I'm going to go about it yet as max allowed in bios is 1.21.

I can run 1.2gpuv but beyond that no matter what the clocks are it shut her down and freezes, I was assuming it was OCP/OVP causing this as temps are just fine in the mid to high 40's for me right now.

However, I don't know what the vrms are hitting.
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #493 of 926
1.2v can cause OCP with high enough freq..but it would not freeze. OCP requires reboot for GPU to respond again.

*and yes ABE = AfterBurnerExtreme for +1.4v ..etc.
post #494 of 926
Quote:
Originally Posted by CL3P20 View Post
1.2v can cause OCP with high enough freq..but it would not freeze. OCP requires reboot for GPU to respond again.

*and yes ABE = AfterBurnerExtreme for +1.4v ..etc.
Thank you good sir, that is valuable info for me. Describes my issues, as I would just get a driver stopped responding until around 950MHz core at 1.2gpuv, then it was just a freeze from there on out. And above 915MHz core I can't get anything 100% stable for any amount of time, it's like it does it when it wants to and never when I want it too. Just not consistent.

I'll admit, tried looking on XS for info but I didn't completely understand everything as most over there I found was a bit more info then I could grasp. If that makes sense.
Edited by rx7racer - 7/8/10 at 7:18pm
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #495 of 926




4~5c -
post #496 of 926
Quote:
Originally Posted by CL3P20 View Post
Hipro's BIOS works like a charm
and which one is that? Is that the GTX 480 over voltage bios on the first post?
http://www.tunerspotter.com/bios/OVEVGA480.rar
The Main PC
(8 items)
 
16c/32t
(9 items)
 
12c/24t
(6 items)
 
CPUMotherboardGraphicsRAM
i7 6700k ASUS Z170I PRO GAMING Mini‑ITX EVGA GTX 1080 TI FTW3 G.SKILL TridentZ F4-3200C14D-16GTZ 
Hard DriveCoolingOSPower
SAMSUNG 950 PRO M.2 Corsair H80i Windows 10 Professional x64 Corsair SF600 
CPUCPUMotherboardGraphics
Xeon E5-2670 Xeon E5-2670 Intel s2600cp2j GTX 980 
RAMHard DriveCoolingPower
Hynix 128GB PC3-12800R ECC Kingston SV300S37A Noctua NH-U9DXi4 Corsair RM850i 
Case
Rosewill RSV-L4000 
CPUCPUMotherboardGraphics
Xeon X5680 Xeon X5680 SuperMicro X8DTL-iF GTX 980 
RAMOS
24GB (6X4GB) DDR3 Memory Ubuntu 
  hide details  
Reply
The Main PC
(8 items)
 
16c/32t
(9 items)
 
12c/24t
(6 items)
 
CPUMotherboardGraphicsRAM
i7 6700k ASUS Z170I PRO GAMING Mini‑ITX EVGA GTX 1080 TI FTW3 G.SKILL TridentZ F4-3200C14D-16GTZ 
Hard DriveCoolingOSPower
SAMSUNG 950 PRO M.2 Corsair H80i Windows 10 Professional x64 Corsair SF600 
CPUCPUMotherboardGraphics
Xeon E5-2670 Xeon E5-2670 Intel s2600cp2j GTX 980 
RAMHard DriveCoolingPower
Hynix 128GB PC3-12800R ECC Kingston SV300S37A Noctua NH-U9DXi4 Corsair RM850i 
Case
Rosewill RSV-L4000 
CPUCPUMotherboardGraphics
Xeon X5680 Xeon X5680 SuperMicro X8DTL-iF GTX 980 
RAMOS
24GB (6X4GB) DDR3 Memory Ubuntu 
  hide details  
Reply
post #497 of 926
Quote:
Originally Posted by rx7racer View Post
So has anyone tried using Hipro5's OCP/OVP Cold Slow Bios?
I use it all the time. My card can do 980/2400 on normal water and no additional mods with this bios. Takes around 1.17v. Although game stable 950/2300 @ 1.05v
Always Changing
(13 items)
 
  
CPUGraphicsRAMHard Drive
12 threads of euphemism Bash me! It's not your color! Loose. THAT'S WHAT SHE SAID! Just enough for all my cp 
OSMonitorPower
linux for gaming plethora of pixels plethora of watts 
  hide details  
Reply
Always Changing
(13 items)
 
  
CPUGraphicsRAMHard Drive
12 threads of euphemism Bash me! It's not your color! Loose. THAT'S WHAT SHE SAID! Just enough for all my cp 
OSMonitorPower
linux for gaming plethora of pixels plethora of watts 
  hide details  
Reply
post #498 of 926
well I was hoping that may help me pull a bit more outta the GTX 480 but, I just have to face I didn't get a great chip.

I can't complain too bad though, 900 on the core isn't exactly a travesty.

Just out of curiosity, I know it's not 100% accurate so I'm not saying it is. But looking at GPU-z and watching my VDDC when I set the voltage I want it will jump and show a round about figure to what I am running. But when I run a program it starts out holding that voltage then it drops to 1.061 and since it only holds 60 seconds of data as soon as the driver recovers I can look and see that as soon as it the voltage dropped on the VDDC graph is when the driver failed.

So my question is, has anybody else noticed a glimpse of this, or should I not go by it at all. Like I said I know it's not accurate to be a bible for my voltage but I was looking at it and using it as a old dated map persay as to where my voltage may be in the neighborhood of being.

If I could just get my voltage to stay consistent, I really think that's my issue with trying to push this chip.

I'm thinking about editing the bios and adjusting all voltage across all powerstates to see if that will help with my question.

Any opinions on that?
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
D
(15 items)
 
The Sheep Skinner
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700 Gigabyte Z170N-Gaming5 Sapphire Radeon R9 Fury Tri-X 3840 G.Skill TridentZ  
Hard DriveCoolingCoolingCooling
960 EVO 500GB EK SE 240mm, Magicool slim 240mm EK Supreme HF CU Gold EKFC-Fury X WB 
OSMonitorPowerCase
Win 10 Pro Acer XG270HU EVGA 750W  Evolv ITX 
MouseMouse Pad
Naos7000 Corsair MM600 
CPUMotherboardGraphicsRAM
C2D E8400 DFI LT P35 Radeon HD4890 OCZ 2GB 800MHz 
Hard DriveOptical DriveOSMonitor
500GB Asus multi DVD W7 U Samsung 2232BW+ 
PowerCase
Corsair HX520W CM 690 
  hide details  
Reply
post #499 of 926
Quote:
Originally Posted by rx7racer View Post
well I was hoping that may help me pull a bit more outta the GTX 480 but, I just have to face I didn't get a great chip.

I can't complain too bad though, 900 on the core isn't exactly a travesty.

Just out of curiosity, I know it's not 100% accurate so I'm not saying it is. But looking at GPU-z and watching my VDDC when I set the voltage I want it will jump and show a round about figure to what I am running. But when I run a program it starts out holding that voltage then it drops to 1.061 and since it only holds 60 seconds of data as soon as the driver recovers I can look and see that as soon as it the voltage dropped on the VDDC graph is when the driver failed.

So my question is, has anybody else noticed a glimpse of this, or should I not go by it at all. Like I said I know it's not accurate to be a bible for my voltage but I was looking at it and using it as a old dated map persay as to where my voltage may be in the neighborhood of being.

If I could just get my voltage to stay consistent, I really think that's my issue with trying to push this chip.

I'm thinking about editing the bios and adjusting all voltage across all powerstates to see if that will help with my question.

Any opinions on that?
I noticed this happening when I was trying speeds above (I think it was) 930 core. I am on the stock bios.
The Main PC
(8 items)
 
16c/32t
(9 items)
 
12c/24t
(6 items)
 
CPUMotherboardGraphicsRAM
i7 6700k ASUS Z170I PRO GAMING Mini‑ITX EVGA GTX 1080 TI FTW3 G.SKILL TridentZ F4-3200C14D-16GTZ 
Hard DriveCoolingOSPower
SAMSUNG 950 PRO M.2 Corsair H80i Windows 10 Professional x64 Corsair SF600 
CPUCPUMotherboardGraphics
Xeon E5-2670 Xeon E5-2670 Intel s2600cp2j GTX 980 
RAMHard DriveCoolingPower
Hynix 128GB PC3-12800R ECC Kingston SV300S37A Noctua NH-U9DXi4 Corsair RM850i 
Case
Rosewill RSV-L4000 
CPUCPUMotherboardGraphics
Xeon X5680 Xeon X5680 SuperMicro X8DTL-iF GTX 980 
RAMOS
24GB (6X4GB) DDR3 Memory Ubuntu 
  hide details  
Reply
The Main PC
(8 items)
 
16c/32t
(9 items)
 
12c/24t
(6 items)
 
CPUMotherboardGraphicsRAM
i7 6700k ASUS Z170I PRO GAMING Mini‑ITX EVGA GTX 1080 TI FTW3 G.SKILL TridentZ F4-3200C14D-16GTZ 
Hard DriveCoolingOSPower
SAMSUNG 950 PRO M.2 Corsair H80i Windows 10 Professional x64 Corsair SF600 
CPUCPUMotherboardGraphics
Xeon E5-2670 Xeon E5-2670 Intel s2600cp2j GTX 980 
RAMHard DriveCoolingPower
Hynix 128GB PC3-12800R ECC Kingston SV300S37A Noctua NH-U9DXi4 Corsair RM850i 
Case
Rosewill RSV-L4000 
CPUCPUMotherboardGraphics
Xeon X5680 Xeon X5680 SuperMicro X8DTL-iF GTX 980 
RAMOS
24GB (6X4GB) DDR3 Memory Ubuntu 
  hide details  
Reply
post #500 of 926
caps ..only thing thats gonna 'extend' the regulation of voltage...you need more capacitance on the input side of the power phases.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › GTX 400 Overclocking/Modding Thread