Overclock.net › Forums › Graphics Cards › NVIDIA › NiBitor with Fermi Support is out
New Posts  All Forums:Forum Nav:

NiBitor with Fermi Support is out - Page 2

post #11 of 97
5/10/10 at 4:59pm
Thread Starter 
Ok now that i have played some
As of now now no fan support

core clocks look to be linked shader even in bios edit (not 100% on this yet)

There are a lot settings for core clock not just the simple 2d 3d extra as before it gets a little confusing so time will tell

max voltage is 1.21

here is a mild bios overclock
AQUA BAY HAF932
(13 items)
  		  
CPUMotherboardGraphicsRAM
I7 930 @ 4.25 1.32v Batch #3943B084 RAMPAGE EXTREME III GTX470@850 Core WC 6 GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
3 OCZ VERTEX RAID 0 (HPT 4310) WD BLACK 500 x6 LG 8x BD rom Win 7 rtm ASUS vk246h 
PowerCase
BFG 800 Watt Coolermaster HAF 932 
View all
  hide details  
Reply
AQUA BAY HAF932
(13 items)
  		  
CPUMotherboardGraphicsRAM
I7 930 @ 4.25 1.32v Batch #3943B084 RAMPAGE EXTREME III GTX470@850 Core WC 6 GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
3 OCZ VERTEX RAID 0 (HPT 4310) WD BLACK 500 x6 LG 8x BD rom Win 7 rtm ASUS vk246h 
PowerCase
BFG 800 Watt Coolermaster HAF 932 
View all
  hide details  
Reply
post #12 of 97
5/10/10 at 5:19pm
Oh

No fan control yet
One foot in..
(17 items)
  		  
CPUMotherboardGraphicsGraphics
3770K Sabertooth Z77 HD7970  HD7970 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB Crucial M4 256GB LSSWM 
CoolingOSMonitorKeyboard
Antec 620 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
View all
  hide details  
Reply
One foot in..
(17 items)
  		  
CPUMotherboardGraphicsGraphics
3770K Sabertooth Z77 HD7970  HD7970 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB Crucial M4 256GB LSSWM 
CoolingOSMonitorKeyboard
Antec 620 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
View all
  hide details  
Reply
post #13 of 97
5/10/10 at 5:25pm
  • Joined: Nov 2007
  • Location: Virginia, USA
  • Posts: 4,322
  • Rep: 226 (Unique: 173)
  • Trader Rating: 44
  • Folding Team Rank: 16
  •  
    Name Team Rank Points / Jun Work Units / Jun
    k4m1k4z3 16 102,000,302 / 413,214 32,522 / 20
       
  • Select All Posts By This User
Eh, I will just stick with the copy of afterburner I have for now. I hit 920 core with little effort. I am going to wait to see how far other people push their volts before I continue.
Gaming rig
(14 items)
  		  
CPUMotherboardGraphicsRAM
i7 2700k ASRock P67 EXTREME4 GEN3 GTX 680 G.SKILL Sniper 8GB 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 1TB Asus Blu-Ray drive Corsair H100 Windows 7 Professional 
Power
Corsair TX750 
View all
  hide details  
Reply
Gaming rig
(14 items)
  		  
CPUMotherboardGraphicsRAM
i7 2700k ASRock P67 EXTREME4 GEN3 GTX 680 G.SKILL Sniper 8GB 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 1TB Asus Blu-Ray drive Corsair H100 Windows 7 Professional 
Power
Corsair TX750 
View all
  hide details  
Reply
post #14 of 97
5/10/10 at 7:12pm
Thread Starter 
Anyone who does get the new nibitor i think we need to collaborate a little on
what each clock is and it's affect as if get's reel confusing

I have figured out shader and memory clocks but not the rest



AQUA BAY HAF932
(13 items)
  		  
CPUMotherboardGraphicsRAM
I7 930 @ 4.25 1.32v Batch #3943B084 RAMPAGE EXTREME III GTX470@850 Core WC 6 GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
3 OCZ VERTEX RAID 0 (HPT 4310) WD BLACK 500 x6 LG 8x BD rom Win 7 rtm ASUS vk246h 
PowerCase
BFG 800 Watt Coolermaster HAF 932 
View all
  hide details  
Reply
AQUA BAY HAF932
(13 items)
  		  
CPUMotherboardGraphicsRAM
I7 930 @ 4.25 1.32v Batch #3943B084 RAMPAGE EXTREME III GTX470@850 Core WC 6 GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
3 OCZ VERTEX RAID 0 (HPT 4310) WD BLACK 500 x6 LG 8x BD rom Win 7 rtm ASUS vk246h 
PowerCase
BFG 800 Watt Coolermaster HAF 932 
View all
  hide details  
Reply
post #15 of 97
5/10/10 at 8:14pm
If it was $10 I'd do it but $25... meh 800MHz is good enough for me. I'll wait for this nibitor version to be leaked.
TEH PWNZERNATORRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 #3951A687 @ 4.1 GIGGLEHERTZ GIGABYTE GA-EX58-UD3R EVGA GTX 470 mushkin 3GB DDR3 1600 7-8-7-20 
Hard DriveOptical DriveOSMonitor
3x Caviar Black 640GB, 2TB, HM160HI, 7200.7 etc. old 52x CD-R I found x64 Windows 7 Ultimate RTM HP w2207h 22" LCD 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Seasonic X-750 Antec Nine Hundred M$ Bluetooth Mouse 5000 
View all
  hide details  
Reply
TEH PWNZERNATORRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 #3951A687 @ 4.1 GIGGLEHERTZ GIGABYTE GA-EX58-UD3R EVGA GTX 470 mushkin 3GB DDR3 1600 7-8-7-20 
Hard DriveOptical DriveOSMonitor
3x Caviar Black 640GB, 2TB, HM160HI, 7200.7 etc. old 52x CD-R I found x64 Windows 7 Ultimate RTM HP w2207h 22" LCD 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Seasonic X-750 Antec Nine Hundred M$ Bluetooth Mouse 5000 
View all
  hide details  
Reply
post #16 of 97
5/10/10 at 8:26pm
Just a real quick rundown of what I know so far.

4 different power states.
I haven't messed with the lower power state speeds, but you will know which is which if you compare gpu-z readings with the domain table.
I don't feel like doing math ATM

Voltage
P15 is by default at setting 2, change to setting 3.
Adjust setting 3 voltage to your desired high perf 3d voltage, as you can see mine is at 1.025v.

Shader

Default is 1215
Don't see anyway to unlink the core/shader

Memory

Default is 1674



Those are the domains I changed, pretty simple process for locking in 3d voltages and speeds.

1 more thing, AB will override the voltage adjustment if you hit reset in AB.

I used the newest NVflash, had to override write protection.
I will try adjusting low power states, will be handy for the multi monitor heat issues.
So when I get some time I'll go dual monitors and see what I can do.



Attachment 154905

Edited by grunion - 5/10/10 at 8:30pm
One foot in..
(17 items)
  		  
CPUMotherboardGraphicsGraphics
3770K Sabertooth Z77 HD7970  HD7970 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB Crucial M4 256GB LSSWM 
CoolingOSMonitorKeyboard
Antec 620 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
View all
  hide details  
Reply
One foot in..
(17 items)
  		  
CPUMotherboardGraphicsGraphics
3770K Sabertooth Z77 HD7970  HD7970 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB Crucial M4 256GB LSSWM 
CoolingOSMonitorKeyboard
Antec 620 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
View all
  hide details  
Reply
post #17 of 97
5/10/10 at 8:57pm
Thread Starter 
Ok even after modded voltages in the bios afterburner still sets a limit to
1.087 but nvidiaInspector will pick up the changes and allow more voltage options

but i am starting to think OCP is kicking in as no matter what voltage i set
i am still limited to 875/1750 2200 even if i go as high as 1.150

but here is why i am thinking this
after 1.087 i dont see my max temps change they only get to 40c
the same as 1.087i would think that going from 1.087 to 1.150 i wouls see much higher temps

i will see if i can find my conductive pen(hard mod time) to comfirm this
AQUA BAY HAF932
(13 items)
  		  
CPUMotherboardGraphicsRAM
I7 930 @ 4.25 1.32v Batch #3943B084 RAMPAGE EXTREME III GTX470@850 Core WC 6 GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
3 OCZ VERTEX RAID 0 (HPT 4310) WD BLACK 500 x6 LG 8x BD rom Win 7 rtm ASUS vk246h 
PowerCase
BFG 800 Watt Coolermaster HAF 932 
View all
  hide details  
Reply
AQUA BAY HAF932
(13 items)
  		  
CPUMotherboardGraphicsRAM
I7 930 @ 4.25 1.32v Batch #3943B084 RAMPAGE EXTREME III GTX470@850 Core WC 6 GB Kingston HyperX 
Hard DriveOptical DriveOSMonitor
3 OCZ VERTEX RAID 0 (HPT 4310) WD BLACK 500 x6 LG 8x BD rom Win 7 rtm ASUS vk246h 
PowerCase
BFG 800 Watt Coolermaster HAF 932 
View all
  hide details  
Reply
post #18 of 97
5/10/10 at 9:05pm
Go into EVGA OC Scanner and try to "unlock power draw"

It worked for me . I went for 900MHz right away without the "unlock power draw" button and got a big old BLUE scren. Not BSOD, just BLUE. I hit the reset button lol
Edited by chatch15117 - 5/10/10 at 9:07pm
TEH PWNZERNATORRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 #3951A687 @ 4.1 GIGGLEHERTZ GIGABYTE GA-EX58-UD3R EVGA GTX 470 mushkin 3GB DDR3 1600 7-8-7-20 
Hard DriveOptical DriveOSMonitor
3x Caviar Black 640GB, 2TB, HM160HI, 7200.7 etc. old 52x CD-R I found x64 Windows 7 Ultimate RTM HP w2207h 22" LCD 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Seasonic X-750 Antec Nine Hundred M$ Bluetooth Mouse 5000 
View all
  hide details  
Reply
TEH PWNZERNATORRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 #3951A687 @ 4.1 GIGGLEHERTZ GIGABYTE GA-EX58-UD3R EVGA GTX 470 mushkin 3GB DDR3 1600 7-8-7-20 
Hard DriveOptical DriveOSMonitor
3x Caviar Black 640GB, 2TB, HM160HI, 7200.7 etc. old 52x CD-R I found x64 Windows 7 Ultimate RTM HP w2207h 22" LCD 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Seasonic X-750 Antec Nine Hundred M$ Bluetooth Mouse 5000 
View all
  hide details  
Reply
post #19 of 97
5/10/10 at 9:05pm
Same here, ~870 is my max, nothing over 1.05 will stabilize it.
Looks like 1.025 and 800-830 is the most I can run and have manageable temps.

I flashed an Asus 480 bios to mine, the only thing that changed were the clock speeds.
Voltages were not affected, still using the default 470 voltages.
One foot in..
(17 items)
  		  
CPUMotherboardGraphicsGraphics
3770K Sabertooth Z77 HD7970  HD7970 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB Crucial M4 256GB LSSWM 
CoolingOSMonitorKeyboard
Antec 620 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
View all
  hide details  
Reply
One foot in..
(17 items)
  		  
CPUMotherboardGraphicsGraphics
3770K Sabertooth Z77 HD7970  HD7970 
RAMHard DriveHard DriveOptical Drive
Samsung Crucial M4 64GB Crucial M4 256GB LSSWM 
CoolingOSMonitorKeyboard
Antec 620 7 Ultimate 64 SyncMaster Eclipse 
PowerCaseMouseMouse Pad
XFX 1050 BE 600T Silver MX518 Desk 
View all
  hide details  
Reply
post #20 of 97
5/10/10 at 9:13pm
Quote:
Originally Posted by grunion View Post
Same here, ~870 is my max, nothing over 1.05 will stabilize it.
Looks like 1.025 and 800-830 is the most I can run and have manageable temps.

I flashed an Asus 480 bios to mine, the only thing that changed were the clock speeds.
Voltages were not affected, still using the default 470 voltages.
+1 for flashing your 470 to 480. I just did 850MHz stable at 1.15v(835MHz had artifacts at 1.087v)

Got a "gray screen of death" like you would see in the ATI forum at 865MHz and 1.175v
TEH PWNZERNATORRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 #3951A687 @ 4.1 GIGGLEHERTZ GIGABYTE GA-EX58-UD3R EVGA GTX 470 mushkin 3GB DDR3 1600 7-8-7-20 
Hard DriveOptical DriveOSMonitor
3x Caviar Black 640GB, 2TB, HM160HI, 7200.7 etc. old 52x CD-R I found x64 Windows 7 Ultimate RTM HP w2207h 22" LCD 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Seasonic X-750 Antec Nine Hundred M$ Bluetooth Mouse 5000 
View all
  hide details  
Reply
TEH PWNZERNATORRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
(13 items)
  		  
CPUMotherboardGraphicsRAM
i7 930 #3951A687 @ 4.1 GIGGLEHERTZ GIGABYTE GA-EX58-UD3R EVGA GTX 470 mushkin 3GB DDR3 1600 7-8-7-20 
Hard DriveOptical DriveOSMonitor
3x Caviar Black 640GB, 2TB, HM160HI, 7200.7 etc. old 52x CD-R I found x64 Windows 7 Ultimate RTM HP w2207h 22" LCD 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Seasonic X-750 Antec Nine Hundred M$ Bluetooth Mouse 5000 
View all
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › NiBitor with Fermi Support is out