Overclock.net › Forums › Components › Memory › Changed RAM timings and got this error. Help.
New Posts  All Forums:Forum Nav:

Changed RAM timings and got this error. Help.

post #1 of 11
Thread Starter 
ok so the title explains it all...

I went in the bios and changed from 2.5/4/4/8 to 2.5/3/3/7 and now i got this...
My memory sticks are working in dual channels...

heres a screen...
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
post #2 of 11
try raising the voltage by 0.1
First Build -
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 64 3200+ Winni @ 2.0 :( Gigabyte GA-K8N Pro-SLI Evga 6800GT :( 4x512mb OCZ Platinum DDR400 
Hard DriveOSMonitorKeyboard
150gb garbage Windows XP Home SP2 19"LCD VX924 3ms g-t-g + 32"LCD Sony 8ms 1360x768 Micro-Soft + G25 Wheel for Xmas $! 
PowerCaseMouse
Athena ATX 520W Black Centurion Razor Copperhead 
  hide details  
Reply
First Build -
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 64 3200+ Winni @ 2.0 :( Gigabyte GA-K8N Pro-SLI Evga 6800GT :( 4x512mb OCZ Platinum DDR400 
Hard DriveOSMonitorKeyboard
150gb garbage Windows XP Home SP2 19"LCD VX924 3ms g-t-g + 32"LCD Sony 8ms 1360x768 Micro-Soft + G25 Wheel for Xmas $! 
PowerCaseMouse
Athena ATX 520W Black Centurion Razor Copperhead 
  hide details  
Reply
post #3 of 11
raise voltage a little and try again, if it still fails you will just have to go back to the original timing because the ram cant handle the timings at that speed...
AMD Gamer
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320 Asus M5A99FX-Pro MSI GTX980 Gaming Crucial Ballistix 4x4gb 1934mhz @ 8-8-8-24 
Hard DriveCoolingOSMonitor
Samsung Evo 500GB Thermaltake Water 2.0 Windows 10 LG 27" 4k 
PowerCaseMouseMouse Pad
Huntkey X7 900w Thermaltake Urban S31 Logitech G500 Rocketfish Knockoff of Razer propad 
Audio
Logitech Z5500 & G430 
  hide details  
Reply
AMD Gamer
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320 Asus M5A99FX-Pro MSI GTX980 Gaming Crucial Ballistix 4x4gb 1934mhz @ 8-8-8-24 
Hard DriveCoolingOSMonitor
Samsung Evo 500GB Thermaltake Water 2.0 Windows 10 LG 27" 4k 
PowerCaseMouseMouse Pad
Huntkey X7 900w Thermaltake Urban S31 Logitech G500 Rocketfish Knockoff of Razer propad 
Audio
Logitech Z5500 & G430 
  hide details  
Reply
post #4 of 11
Thread Starter 
I have the voltages to 2.5, i'll try that...

Another thing... when I lower the cas latency to 2.0, the PC doesn't boot... why's that? memory doesn't handle the thing?

Thanks again
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
post #5 of 11
Thread Starter 
okay so i raised the volts to 2.65 and its still doing the same error at the same time... help??
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
post #6 of 11
Basically it wont run at that speed. Your divider is really bad at 3:2 also. I would put everything back to normal and see what is the highest your ram can go byitself. Then bring up your fsb to match it. Then you would be at 1:1. If you want to go with higher fsb try upping the fsb a little and then bring up your ram to maybe 320mhz and see if it works. Aim for a 1:1 and then a 5:4 ratio.
E6600
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 C2D @ 3.6 P5B-D EVGA 7600GT 2GB Gskill HZ 
Hard DriveOptical DriveOSMonitor
74gb Raptor Samsung DVD+ XP LG 19inch 
PowerCase
Rosewill 600w Raidmax Silmodon 
  hide details  
Reply
E6600
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 C2D @ 3.6 P5B-D EVGA 7600GT 2GB Gskill HZ 
Hard DriveOptical DriveOSMonitor
74gb Raptor Samsung DVD+ XP LG 19inch 
PowerCase
Rosewill 600w Raidmax Silmodon 
  hide details  
Reply
post #7 of 11
In CPU-Z tell us what it says under SPD...
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6700 3.6 1.35v Asus P5B Deluxe Wifi 8800gtx 2Gb Crucial Ballstix 667 
Hard DriveOSMonitorKeyboard
2x WD raptors XP Pro -SP2 Samsung 204b Saitek Eclipse II 
PowerCaseMouse
OCZ GX 600w Lian-Li 1000vb Logitech Mx-518 +MX revolution 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6700 3.6 1.35v Asus P5B Deluxe Wifi 8800gtx 2Gb Crucial Ballstix 667 
Hard DriveOSMonitorKeyboard
2x WD raptors XP Pro -SP2 Samsung 204b Saitek Eclipse II 
PowerCaseMouse
OCZ GX 600w Lian-Li 1000vb Logitech Mx-518 +MX revolution 
  hide details  
Reply
post #8 of 11
It seems your mobo set the ram as ddr266, not ddr400. Manually set the ddr at 400, not auto. Then try to lower the timing value step by step. Once you set ddr to 400, you'll get 1:1 ratio, I guess.
My System
(13 items)
 
  
CPUMotherboardOSMonitor
P4 Northwood 2.6c/3.0 P4P800 DELUXE Win XP Pro Sp2 Samsung Syncmaster CX714X 
KeyboardPowerMouse
Slim Aspire ATX-AS420W Logitech PS2 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
P4 Northwood 2.6c/3.0 P4P800 DELUXE Win XP Pro Sp2 Samsung Syncmaster CX714X 
KeyboardPowerMouse
Slim Aspire ATX-AS420W Logitech PS2 
  hide details  
Reply
post #9 of 11
Thread Starter 
Yeah i know.... i've put it myseft to 266 it was at 320, and with 320 in dual channel it goes over 370Mhz....

I can't put it at 400 because i have to different memory sticks... one PC2700 and the other PC3200... i'll try putting it back to 320Mhz

Edit: Okay so now i've activated the Memory Acceleration Mode (MAM) and set it to 320mhz. with the same timming... right now i am running Prime mem test...

Re-edit: Now i got the same error.. but in less than 3 minutes... :X I think I should let the default... xD


Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
post #10 of 11
Thread Starter 
Sorry double post....

But now i get a error with everything default! o.O?

I set back the timings to be defined by SPD and put the DDR320 as usual... the voltage Auto and now i get this error.. the same as always passed 16 minutes... ?? it the RAM damaged or something?

Edit: The error could be due to... me using my computer while i make the stress? (WMP , Dreamweaver, Firefox ON) ?
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
Homer
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel C2D E8400 @ 3.6Ghz Asus P5Q-PRO Saphire Radeon HD 5770 1Gb XFX Radeon HD 5770 1Gb 
RAMRAMHard DriveHard Drive
2x 2Gb Team Elite 2Gb Adata Maxtor 250Gb Sata Maxtor 160Gb IDE 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 Evo Windows 7 Professional 64Bits Samsung SyncMaster 23" Logitech MK320 Wireless 
PowerCaseMouse
550W Eurotech Thermaltake Tsunami Logitech Mx 510 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Changed RAM timings and got this error. Help.