Hi guys 
some spec first
CPU Clock: 2800Mhz @ 3710Mhz (stable i guess, didn´t run my first check)
Oced FSB & multi: 265 x 14 @ 1:1
Core Voltage: 1.525v
MotherBoard: Asus P4C800 DLX
RAM: 2x Adata Vitesta PC4000 512MB vram @ 2.85
CPU Cooling: Zalman 7000B Alcu
Temps Idle: 30C Full 46C
Case Cooling: 1x 80mm
PSU Eurotech 460W
I tried to pass this value but it doesn´t seem to accept higher voltage and keeps crashing at startup. In Motehrboard monitor it tells that core voltage is about 1.57/1.6 or so and very unstabel... perhaps is the mobo.
Does this means the real vcore (remember i set it to 1.525 in bios) or the capacity of the psu to bring power to board?
I saw some guys running it at 1.65 (air cooled) and bringing about 3.9mhz but i think mine can´t do that. i already tried to up the vcore to 1.6 but keeps crashing. My question is, if the reading in mbmonitor tells 1.57 can i surpass this value in the bios? or it´s a psu problem?
have a nice sunday.. or rainday...
waht do you guys think of this?
some spec first
CPU Clock: 2800Mhz @ 3710Mhz (stable i guess, didn´t run my first check)
Oced FSB & multi: 265 x 14 @ 1:1
Core Voltage: 1.525v
MotherBoard: Asus P4C800 DLX
RAM: 2x Adata Vitesta PC4000 512MB vram @ 2.85
CPU Cooling: Zalman 7000B Alcu
Temps Idle: 30C Full 46C
Case Cooling: 1x 80mm
PSU Eurotech 460W
I tried to pass this value but it doesn´t seem to accept higher voltage and keeps crashing at startup. In Motehrboard monitor it tells that core voltage is about 1.57/1.6 or so and very unstabel... perhaps is the mobo.
Does this means the real vcore (remember i set it to 1.525 in bios) or the capacity of the psu to bring power to board?
I saw some guys running it at 1.65 (air cooled) and bringing about 3.9mhz but i think mine can´t do that. i already tried to up the vcore to 1.6 but keeps crashing. My question is, if the reading in mbmonitor tells 1.57 can i surpass this value in the bios? or it´s a psu problem?
have a nice sunday.. or rainday...
waht do you guys think of this?
