Overclock.net › Forums › Components › Hard Drives & Storage › Problem with Seagate brick fix ?!
New Posts  All Forums:Forum Nav:

Problem with Seagate brick fix ?!

post #1 of 2
Thread Starter 
Hi guys! I bought a USB cable and should do the fix for BSY Seagate drive. I have now tried to do this on 3 different drives and I cannot write at all in hyperterminal?!

I know 100% I have the cables where they should be, good connection and correct drivers for the usb cable.

Anyone have any suggestion what it could be? Just a bad USB cable? I even solder the USB cable to the pins on the drives to make sure they connect 100% .... I'm getting insane! =)

Pix of cable + disc



Edited by DrApu - 6/7/10 at 2:06pm
post #2 of 2
Thread Starter 
SOLVED IT!
Found another cable and now I have connection with the drive in hyperterminal. The reason was the cable I had.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Hard Drives & Storage
Overclock.net › Forums › Components › Hard Drives & Storage › Problem with Seagate brick fix ?!