Overclock.net › Forums › Cooling › Other Cooling Discussions › Fan/LED cabling...
New Posts  All Forums:Forum Nav:

Fan/LED cabling...

post #1 of 7
Thread Starter 
I hope I didn't post this in the wrong place...well anyway...

So, my Cooler Master 690 II Advanced came with an LED on/off switch for the front fan's LEDs...and I would like to utilize it for powering (or taking away said power) my led strip that i have.

The top panel of my case, takes a molex connector and uses it to power a SATA-X dock...and this fan's LEDs. The fan has a 3 pin (male) connector, and the top has a 3 pin (female) connector that comes down to power it.

Basically, the question boils down to...will this work?

3pin (female) --> molex + 3 pin male

using a y cable to connect to both the LED strip (molex) and the fan (3 pin)

Thank you in advance
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
post #2 of 7
Thread Starter 
bump! i must know!

here's a diagram http://i850.photobucket.com/albums/a...5/Untitled.png

+rep for anyone who knows of course
Edited by uno_zapdos_tres - 6/8/10 at 2:42pm
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
post #3 of 7
Thread Starter 
bump.
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
post #4 of 7
Thread Starter 
bump
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|Intel Core i7 860 at 4.0GHz HT on 1.31V| |Asus P7P55D Pro| |GTX 260 OC, GTS 250 OC (Folding 24/7)| |4GB Corsair xms3 at 1458 MHz, 8-8-8-20| 
Hard DriveOSMonitorPower
|WD 500GB Blue SATA, WD 500GB Black SATA| |Windows 7 Premium (64-bit)| |Asus 24" at 1920x1080, HP 19" at 1440x900| |Corsiar TX850W| 
CaseMouseMouse Pad
|Cooler Master 690 II Advanced| |Razer Naga| |Razer Goliathus Standard| 
  hide details  
Reply
post #5 of 7
Should work fine.
You should not bump more than daily tho... bad form you know old chap.
    
CPUMotherboardGraphicsGraphics
i7 2600k Asrock Extreme 4 Gen 3 Evga GTX560Ti 448 FTW Evga GTX560Ti 448 FTW 
RAMHard DriveHard DriveCooling
Corsair Vengeance DDR3 Crucial M4 SSD 256GB Samsung Spinpoint F3 1TB Alphacool NexXxos 480 
CoolingOSMonitorKeyboard
XSPC Raystorm Windows 7 Ultimate Iiyama ProLite E2273HDS Corsair Vengeance K90 
PowerCaseAudio
Silverstone Strider+ 850 Silverstone Temjin TJ07 Asus Xonar Essence STX 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 2600k Asrock Extreme 4 Gen 3 Evga GTX560Ti 448 FTW Evga GTX560Ti 448 FTW 
RAMHard DriveHard DriveCooling
Corsair Vengeance DDR3 Crucial M4 SSD 256GB Samsung Spinpoint F3 1TB Alphacool NexXxos 480 
CoolingOSMonitorKeyboard
XSPC Raystorm Windows 7 Ultimate Iiyama ProLite E2273HDS Corsair Vengeance K90 
PowerCaseAudio
Silverstone Strider+ 850 Silverstone Temjin TJ07 Asus Xonar Essence STX 
  hide details  
Reply
post #6 of 7
That will work without a problem all you are adding is a y splitter and a switch from what I can see. A molex connector from your power supply has enough power to run numorous fans and leds with splitters. Just dont remove any current limiting resisters that might be in your led strip.
Edited by macsbeach98 - 6/9/10 at 4:11am
post #7 of 7
the switch on coolermaster cables is just a power switch and gives 12V on the 2 pin connector which does to the Leds.
All you need is to power your leds with that 2 pin plug with your case fans.

You should be able to add quite a few leds, but I would not recommend adding cathodes as that might be too much current.
Figglesticks
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 Asus P6E SE Zotac GTX 480 TeamGroup 3 x 2GB 
Hard DriveOSMonitorKeyboard
TeamGroup Extreme G-1 + 2 X Western 2tb Seven Ultimate X64 Samsung P2350 84 key 
PowerCaseMouseMouse Pad
CoolerMaster M700 (All black leads) Antec 300 - Mcp655 - ETC G5 Razer Goliathus Alpha 
  hide details  
Reply
Figglesticks
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 Asus P6E SE Zotac GTX 480 TeamGroup 3 x 2GB 
Hard DriveOSMonitorKeyboard
TeamGroup Extreme G-1 + 2 X Western 2tb Seven Ultimate X64 Samsung P2350 84 key 
PowerCaseMouseMouse Pad
CoolerMaster M700 (All black leads) Antec 300 - Mcp655 - ETC G5 Razer Goliathus Alpha 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Cooling Discussions
Overclock.net › Forums › Cooling › Other Cooling Discussions › Fan/LED cabling...