post #1 of 1
Thread Starter 
Hello I recently bought the parts to ensemble my PC, but always ends in bsod this is my first ensemble PC and i think is because i should overclock all my stuff, i was asking in the ocz forums and they told me the problem should be because my memory was designed for x58 chip sets and my main board was x48, but i don't think so because sometimes my computer is very stable but crash with movies in hd and games, so please help´me, i never overclocked something here is my configuration.


Motherboard: asus P5E3 Premium
CPU: Intel Q9400 2.66 GHz
Memory: OCZ3P1333LV6GK (3*2gb)
# 1333MHz DDR3 memory kit
# Timings of 7-7-7-24, 1.65V
I´ve tested with 1,2 and 3 modules
and always ends in BSOD, this memory

Graphic Card: Galaxy GTX 295
PSU: corsair 750 w

the more stable configuration was with 4 gb of memory and latency 7-7-7-18 and 1.5 vol but sometimes ends en the blue screen too, but it suppose this memory should work with 7-7-7-24 and 1.65 vol but it doesn't, i red in one forum than the motherboard supports lower frequencies in the orange slots and high frequencies in the black slots, also i saw than if im gong to use more of 4 gb y should use the DRAM SKEW CONTROL but i don't know why and how, please help me i'm desperate. i going to set the cpu to 3.2 leave the cpu voltage on auto and put the clock speed as 3.2 and cpu voltage to 1.3, what you think.
Edited by Skatalitico - 6/8/10 at 12:56pm