Overclock.net › Forums › AMD › AMD Motherboards › my 890fx-gd70 got cooked
New Posts  All Forums:Forum Nav:

my 890fx-gd70 got cooked - Page 2

post #11 of 60
Quote:
Originally Posted by bluepiglet View Post
guys, the mobo is kia.

15 minutes under prime95. the system had a shutdown suddenly and that was it. something got cooked below the northbridge heatsink.

i don't think i overclocked too much.......

Is that 2.52 volt on PPL normal?
Gaming 2016
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Gigabyte Z170M-D3H MSI GTX1070 8G ARMOR Kingston HyperX FURY DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Evo Samsung 850 Evo Seagate SHHD Cooler Master Nepton 240M 
OSMonitorKeyboardPower
Windows 10 Pro XB321HK Logitech 710 Corsair RM550x 
CaseMouseMouse PadAudio
Cooler Master Silencio 352 Logitech G500 Razer Goliathus Presonus Eris 4.5 
  hide details  
Reply
Gaming 2016
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Gigabyte Z170M-D3H MSI GTX1070 8G ARMOR Kingston HyperX FURY DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Evo Samsung 850 Evo Seagate SHHD Cooler Master Nepton 240M 
OSMonitorKeyboardPower
Windows 10 Pro XB321HK Logitech 710 Corsair RM550x 
CaseMouseMouse PadAudio
Cooler Master Silencio 352 Logitech G500 Razer Goliathus Presonus Eris 4.5 
  hide details  
Reply
post #12 of 60
It would be yellow or red if it was too high, I think. My board marks voltages in red, when they are at their limits.
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
post #13 of 60
Quote:
Originally Posted by B!0HaZard View Post
It would be yellow or red if it was too high, I think. My board marks voltages in red, when they are at their limits.
Ok, looked so high imo
Gaming 2016
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Gigabyte Z170M-D3H MSI GTX1070 8G ARMOR Kingston HyperX FURY DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Evo Samsung 850 Evo Seagate SHHD Cooler Master Nepton 240M 
OSMonitorKeyboardPower
Windows 10 Pro XB321HK Logitech 710 Corsair RM550x 
CaseMouseMouse PadAudio
Cooler Master Silencio 352 Logitech G500 Razer Goliathus Presonus Eris 4.5 
  hide details  
Reply
Gaming 2016
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Gigabyte Z170M-D3H MSI GTX1070 8G ARMOR Kingston HyperX FURY DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Evo Samsung 850 Evo Seagate SHHD Cooler Master Nepton 240M 
OSMonitorKeyboardPower
Windows 10 Pro XB321HK Logitech 710 Corsair RM550x 
CaseMouseMouse PadAudio
Cooler Master Silencio 352 Logitech G500 Razer Goliathus Presonus Eris 4.5 
  hide details  
Reply
post #14 of 60
I agree, my PLL is like 1.5V. I just can't imagine that it wouldn't warn him if he went too high.
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
M1XN
(18 items)
 
Study Zenbook
(5 items)
 
 
CPUMotherboardGraphicsRAM
i7 4770K @ 4.2 GHz ASUS Maximus VI Impact MSI GTX 970 Gaming 4G 2x8 GB Kingston HyperX DDR3 @ 2400 MHz 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 64 GB Crucial M4 128 GB SAMSUNG Spinpoint M9T 2 TB LiteOn DL-8ATSH 
CoolingOSMonitorKeyboard
Noctua NH-C14 Windows 10 64-bit ViewSonic VP2770 Vortex Pok3r 
PowerCaseMouseMouse Pad
Corsair SF600 NCASE M1 V2.5 Logitech G502 SteelSeries QcK+ 
AudioOther
HiFiMan HE-400 Logitech C920 
CPUGraphicsRAMHard Drive
i5-3317 GT 620M 2 GB soldered + 8 GB Corsair OCZ Vertex 3 120 
OS
Windows 7 Home Premium 64-bit 
  hide details  
Reply
post #15 of 60
Quote:
Originally Posted by B!0HaZard View Post
I agree, my PLL is like 1.5V. I just can't imagine that it wouldn't warn him if he went too high.
Maybe is because youre with intel, but i think 2.5v is a bit much.
Gaming 2016
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Gigabyte Z170M-D3H MSI GTX1070 8G ARMOR Kingston HyperX FURY DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Evo Samsung 850 Evo Seagate SHHD Cooler Master Nepton 240M 
OSMonitorKeyboardPower
Windows 10 Pro XB321HK Logitech 710 Corsair RM550x 
CaseMouseMouse PadAudio
Cooler Master Silencio 352 Logitech G500 Razer Goliathus Presonus Eris 4.5 
  hide details  
Reply
Gaming 2016
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 6700K Gigabyte Z170M-D3H MSI GTX1070 8G ARMOR Kingston HyperX FURY DDR4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Evo Samsung 850 Evo Seagate SHHD Cooler Master Nepton 240M 
OSMonitorKeyboardPower
Windows 10 Pro XB321HK Logitech 710 Corsair RM550x 
CaseMouseMouse PadAudio
Cooler Master Silencio 352 Logitech G500 Razer Goliathus Presonus Eris 4.5 
  hide details  
Reply
post #16 of 60
Thread Starter 
Quote:
Originally Posted by 1337LutZ View Post
Is that 2.52 volt on PPL normal?
it was around 2.5v by default as i can remember. does look pretty high if compared with any intel boards. but i think it's just the way it should be according to this

i raised the each volt setting no more than 1 step, apart from the core, which was 2 steps.

i believe it was one of these "auto" actually killed the board, or the board is faulty at first place. i've never seen a northbridge got hot even after shutdown. it hurt me fingers like the back of a graphic card.
BluePiglet 5
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @4.6ghz ASUS P8P67 Pro HIS 7950 IceQ G.SKILL Sniper DDR3-12800 4GB x2 
Hard DriveMonitorPowerCase
Intel X25-M G2, WD 640G x3 raid0 SAMSUNG T260 Corsair HX 850w Corsair 800D 
  hide details  
Reply
BluePiglet 5
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @4.6ghz ASUS P8P67 Pro HIS 7950 IceQ G.SKILL Sniper DDR3-12800 4GB x2 
Hard DriveMonitorPowerCase
Intel X25-M G2, WD 640G x3 raid0 SAMSUNG T260 Corsair HX 850w Corsair 800D 
  hide details  
Reply
post #17 of 60
2.5 is ok......it's a bit above default.......OP have you taken the NB cooler off and see what happened?
    
CPUMotherboardGraphicsRAM
X5680@4.8GHz 192x25x1.47v EVGA X58 Classified(E759) EVGA GTX980 Ti SLI @1515/8400 6x4GB GSkill Ripjaws@1540 8-8-8-20-2T-1.55v 
Hard DriveHard DriveHard DriveCooling
Corsair Force GT 120GB/OS Corsair Force LS 60GB/PAGE Toshiba 4TB/GAMES CPU-EK Supremacy 
CoolingCoolingCoolingCooling
MB-EK FB Classified GPU-EK FC TitanX/Backplates Rad-Swiftech 360mm MCR-320/Pump Rad-Barrow 280mm 
CoolingCoolingCoolingOS
Ram-Corsair 2x60mm Resevoir-Barrow 250x50mm Misc-6x120mm/2x140mm/NZXT Sentry,Barrow 3/8 fit... Windows 10 Pro x64 
MonitorKeyboardPowerCase
Seiki 50'' 3840x2160 30hz Logitech G110 EVGA Supernova G2 1300 Lian Li PC-A77F 
MouseMouse PadOtherOther
Logitech G9x Xtrac Ripper XL Logitech G27 Logitech G940 
Other
Xbox One controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
X5680@4.8GHz 192x25x1.47v EVGA X58 Classified(E759) EVGA GTX980 Ti SLI @1515/8400 6x4GB GSkill Ripjaws@1540 8-8-8-20-2T-1.55v 
Hard DriveHard DriveHard DriveCooling
Corsair Force GT 120GB/OS Corsair Force LS 60GB/PAGE Toshiba 4TB/GAMES CPU-EK Supremacy 
CoolingCoolingCoolingCooling
MB-EK FB Classified GPU-EK FC TitanX/Backplates Rad-Swiftech 360mm MCR-320/Pump Rad-Barrow 280mm 
CoolingCoolingCoolingOS
Ram-Corsair 2x60mm Resevoir-Barrow 250x50mm Misc-6x120mm/2x140mm/NZXT Sentry,Barrow 3/8 fit... Windows 10 Pro x64 
MonitorKeyboardPowerCase
Seiki 50'' 3840x2160 30hz Logitech G110 EVGA Supernova G2 1300 Lian Li PC-A77F 
MouseMouse PadOtherOther
Logitech G9x Xtrac Ripper XL Logitech G27 Logitech G940 
Other
Xbox One controller 
  hide details  
Reply
post #18 of 60
Thread Starter 
Quote:
Originally Posted by Vlasov_581 View Post
2.5 is ok......it's a bit above default.......OP have you taken the NB cooler off and see what happened?
would that effect the rma?

ok, i did it anyway. there is nothing my eyes can see. no physical damage. but by the smell, my guess it was the nb chipset.
Edited by bluepiglet - 6/9/10 at 6:25am
BluePiglet 5
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @4.6ghz ASUS P8P67 Pro HIS 7950 IceQ G.SKILL Sniper DDR3-12800 4GB x2 
Hard DriveMonitorPowerCase
Intel X25-M G2, WD 640G x3 raid0 SAMSUNG T260 Corsair HX 850w Corsair 800D 
  hide details  
Reply
BluePiglet 5
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @4.6ghz ASUS P8P67 Pro HIS 7950 IceQ G.SKILL Sniper DDR3-12800 4GB x2 
Hard DriveMonitorPowerCase
Intel X25-M G2, WD 640G x3 raid0 SAMSUNG T260 Corsair HX 850w Corsair 800D 
  hide details  
Reply
post #19 of 60
not if you don't scratch the screws but since you're RMAing don't worry about it then.......it probably because of the crappy paste that MSI puts on their NB.......when i bough my board i was loading @ 75ish C.......after taking it off and putting A.S.5 on it and adding fans my NB temps NEVER go over 55C......not even with my settings
    
CPUMotherboardGraphicsRAM
X5680@4.8GHz 192x25x1.47v EVGA X58 Classified(E759) EVGA GTX980 Ti SLI @1515/8400 6x4GB GSkill Ripjaws@1540 8-8-8-20-2T-1.55v 
Hard DriveHard DriveHard DriveCooling
Corsair Force GT 120GB/OS Corsair Force LS 60GB/PAGE Toshiba 4TB/GAMES CPU-EK Supremacy 
CoolingCoolingCoolingCooling
MB-EK FB Classified GPU-EK FC TitanX/Backplates Rad-Swiftech 360mm MCR-320/Pump Rad-Barrow 280mm 
CoolingCoolingCoolingOS
Ram-Corsair 2x60mm Resevoir-Barrow 250x50mm Misc-6x120mm/2x140mm/NZXT Sentry,Barrow 3/8 fit... Windows 10 Pro x64 
MonitorKeyboardPowerCase
Seiki 50'' 3840x2160 30hz Logitech G110 EVGA Supernova G2 1300 Lian Li PC-A77F 
MouseMouse PadOtherOther
Logitech G9x Xtrac Ripper XL Logitech G27 Logitech G940 
Other
Xbox One controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
X5680@4.8GHz 192x25x1.47v EVGA X58 Classified(E759) EVGA GTX980 Ti SLI @1515/8400 6x4GB GSkill Ripjaws@1540 8-8-8-20-2T-1.55v 
Hard DriveHard DriveHard DriveCooling
Corsair Force GT 120GB/OS Corsair Force LS 60GB/PAGE Toshiba 4TB/GAMES CPU-EK Supremacy 
CoolingCoolingCoolingCooling
MB-EK FB Classified GPU-EK FC TitanX/Backplates Rad-Swiftech 360mm MCR-320/Pump Rad-Barrow 280mm 
CoolingCoolingCoolingOS
Ram-Corsair 2x60mm Resevoir-Barrow 250x50mm Misc-6x120mm/2x140mm/NZXT Sentry,Barrow 3/8 fit... Windows 10 Pro x64 
MonitorKeyboardPowerCase
Seiki 50'' 3840x2160 30hz Logitech G110 EVGA Supernova G2 1300 Lian Li PC-A77F 
MouseMouse PadOtherOther
Logitech G9x Xtrac Ripper XL Logitech G27 Logitech G940 
Other
Xbox One controller 
  hide details  
Reply
post #20 of 60
Thread Starter 
Quote:
Originally Posted by Vlasov_581 View Post
not if you don't scratch the screws but since you're RMAing don't worry about it then.......it probably because of the crappy paste that MSI puts on their NB.......when i bough my board i was loading @ 75ish C.......after taking it off and putting A.S.5 on it and adding fans my NB temps NEVER go over 55C......not even with my settings
last msi board i owned was about 15 years ago. at that time their boards were very well made. and i was looking for a surprise when i bought this one. and i guess i have it now......
BluePiglet 5
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @4.6ghz ASUS P8P67 Pro HIS 7950 IceQ G.SKILL Sniper DDR3-12800 4GB x2 
Hard DriveMonitorPowerCase
Intel X25-M G2, WD 640G x3 raid0 SAMSUNG T260 Corsair HX 850w Corsair 800D 
  hide details  
Reply
BluePiglet 5
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @4.6ghz ASUS P8P67 Pro HIS 7950 IceQ G.SKILL Sniper DDR3-12800 4GB x2 
Hard DriveMonitorPowerCase
Intel X25-M G2, WD 640G x3 raid0 SAMSUNG T260 Corsair HX 850w Corsair 800D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › my 890fx-gd70 got cooked